similar to: TDM2400 answer detection

Hello Fellows! I have a TDM2400 and I can't put it to work. Every time it receive a call the Asterisk handle it and call the SIP phone; when people pick up the fone they don't hear nothing and the caller hear the phone rings and nothing happens. In Asterisk console I can see the message answered by the SIP's phone. I lost a lot of time trying to solve this problem without success :(.

Hi, I'm trying to connect an HDL F10 device for a friend living in Brazil to the TDM2400 on his Asterisk server. That device should behave like a normal doorbell and it is if connected to an analog PBX. I connected to the TDM2400 and everything works fine except for one thing: when the called party hangs up his phone, the F10 HDL device does not hang up. I'm not brazilian and not

Hi List... I have an asterisk box with one TDM2400, it has 8 FXS's and 12 FXO's, and it also has the echo canceller... I'm running Asterisk 1.2.13 and Zaptel 1.2.12 with the Kernel 2.6.9-34.0.2.EL I'm using Polycom's 501 with the SIP 1.6.2.0041 The problem is when someone dials to or from the PSTN through the TDM2400, the voice quality is crappy...Instead of hearing:

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com -------------- next part -------------- An HTML attachment was scrubbed...

Hi, >From a chat with Kevin Fleming during last Astricon Europe in Paris, I understood that Digium was about to support TDM bridging with TDM2400 board. This feature had to be introduced with 1.4 release. Is my understanding correct ? If correct, would it be reliable enough to bridge 14400b/s fax calls though I know, fax were not officially supported or shall I use Sangoma boards for that ?

does TDM2400 work on 3.3v pci slot? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070211/ac7d0c79/attachment.htm

We have a recently deployed server with a new TDM2400 card that will not put dialtone or audio on FXS ports after the physical server restarts (though they will ring if called, there's just no audio on the line if the phone at the other end picks up). The symptom can be resolved by stopping Asterisk, restarting DAHDI, and then restarting Asterisk. So far, this has happened on both times the

Good Day List, I'm having some issues with echo cancel on my Asterisk box, and have done extensive reading and have gained some useful pointers from this list but have a couple of hopefully fairly simple questions. The Asterisk box is connected via 20 FXO ports on a TDM2400 with the Hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a

Hello list, I am encountering a bit of a problem in working with incoming calls with a TDM2400 and * 1.2.4; when a call comes in, * will correctly detect the ringing, but will sometimes report multiple "Attempting native bridge". What I do is basically that when a call comes in, I dial a different box through the same Zaptel interface and I get logs like this: [call comes in]

Hello, I've installed two Digium TDM2400 cards on my server. One has 24FXS and the other has 16 FXS and 4 FXO. They are both connected to power. Unfortunately some of the FXS module fail to initialize and I find following messages in the logs (the rest of the FXS modules work well). Could someone give me some advice? !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 Feb 9 18:09:45

Hi Adam, I have the same problem. Are you sure is an echo canceller problem? Following advices from this list I discovered that I had an IRQ shared. Untill now I didn't try the new setup but I really hope that this was the problem. If you manage to solve the problem in any way please give me advise. Ciao You can make sure the card is sitting on

i have a full fxo TDM24 and i have problem with installing it. when i run modprobe wctdm24xxp dmesg shows the following messages. and it waits for ever and nothing will happen. i'm sure that: - the power is plugged into tdm24 board - udev is configured and is working with other tdm cards. - zaptel.conf is configured. Zapata Telephony Interface Registered on major 196 Zaptel Version:

Hello everyone, I have noticed thar our dahdi-channels.conf has some repeating directives, for instance for channel 2 (FXO) we have these settings: ;;; line="2 WCTDM/0/1 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default As you can see, a few directives are repeated (callerid, group, context). This was generated by

I have one TDM2404E digium card on asterisk box, after configuring the zaptel and zapata configuration files, I am getting these errors when reloading asterisk: ast_unregister_indication_country: Removed default indication country 'us' setup_zap: Ignoring signalling setup_zap: Ignoring answeronpolarityswitch unable to recognize channel 13-5 what is the reason for that? Thanks,

Buenas noches a todos las personas del foro, Me dirijo a vosotros con la siguiente cuestión: ¿Cómo es posible obtener, para cada individuo (identificado con la variable ID) de un data frame, la CANTIDAD ACUMULADA hasta una determinada fecha (día, mes y año), que es diferente para cada individuo y que se denota por la variable ENTRADA? Ejemplo: require(data.table) datos2 <-

Hi all, Years ago, I was pretty sure attempting to use two TDM400p cards in one machine was recommended against by Digium ... probably because the cards couldn't hack it, and/or interrupt problems etc I have seen some posts recently that seem to indicate it is in fact possible these days thanks to some updated firmware perhaps? ..... I just need to have two in the server because the 4 ports

Hola, ¿qué tal? Creo que las funciones melt (particularmente) y cast del paquete reshape te pueden ayudar. Con melt podrías transformar tu df en algo con el aspecto sol col valor con 1 0.000... con 2 NaN ... Un saludo, Carlos J. Gil Bellosta http://www.datanalytics.com El día 4 de septiembre de 2013 22:35, neo <ericconchamunoz en gmail.com> escribió: > Estimada

Hi all, I have a TDM2400 full of FXS cards and a TDM800 full of FXO cards. If I have a fax machine on the FXS port dialing out through asterisk on the TDM800 FXO, should I be expecting any problems? Or should this just work as expected? (ie, flawlessly with the asterisk box essentially transparent to the whole operation). I am doing it this way to allow many faxes and modems to share a dial

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short

Hi, We added more g729 licenses today that we bought from digium on Friday. Since we had previously installed their licenses and had them running we just ran the register command along with the new key that was given to us. After we restarted asterisk NONE of the g729's worked even though if we do a show g729 it shows the new correct total licenses. In the licenses folder we see both license