similar to: PCI: UNABLE TO HANDLE 64-bit ADDRESS SPACE FOR

Hi to All, I need to implement an automatic telephone messaging system that works like this: -the system generates the call based on mysql records or any database -when the client answer the phone, the Asterisk PBX playback a recorded message -when finish, hang up the channel. Only for voice messages not SMS. Exists some application based on Asterisk that makes this, or any code to

Hi to all, I need some help, I have an Asterisk Server in a small call center, for inbound calls I setup a Queue in queues.conf and their respective Agents in agents.conf, but when an Agent is calling out and a call is coming from PSTN the call is send to that agents which have a call in progress. How I can fix this in order to have only one call at a time. I think in limitonpeer and call-limit

Hi All, Can anybody help me in building a initrd*.img in CentOS 5 for Intel SATA driver. More Details: I have a driver package downloaded from the Intel Web site: http://www.intel.com/support/motherboards/server/s3000ah/index.htm It is for an Intel motherboard S3000AH using the embedded RAID controller. We need this driver to work with CentOS5. I'd like to get help with the

Hi all did anyone of you experience an error like "do_irq: stack overflow" in configuring a TE212P on Fedora core 6? The server immediately hangs, I don't know if this can be related to hardware configuration or kernel incompatibility... This problem arises when I try to configure the channels with the usual command "ztcfg" and it is strictly related to the presence of the

Does anybody have Digium TE212P interface card on Dell PowerEdge 1850? I'm planning to install * on that configuration so I'm looking for any positive/negative experience. Best regards, -- Tomislav Par?ina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)270248 Mob.: +385(91)1212148 SIP: tomo@sip.lama.hr e-mail: tparcina#lama.hr http://www.lama.hr

Hi Guys I'm configuring a TE212P card and have the following two entries in my /etc/asterisk/zapata.conf switchtype=dms100 signalling=pri_cpe When I reload asterisk I get the following messages: > -- Reloading module 'chan_zap.so' (Zapata Telephony) > == Parsing '/etc/asterisk/zapata.conf': Found > [Mar 30 17:48:42] WARNING[2985]: chan_zap.c:11072

Hi, I'm trying to get a TE212 working on a Dell PowerEdge 1850 running Debian etch using the latest release of libpri (1.4.0), zaptel (1.4.2.1) and asterisk (1.4.4). The initilization of the Octasic echo canceller seems to fail when the wct4xxp module is loaded. [...] VPM450: echo cancellation for 64 channels Failed to open chip, code 00103017! VPM450: Failed to initialize [...] By looking

Hi all. When i do a "service zaptel stop" on my machine,sometimes it crash and i must unplug and plug the power cord to restart the machine. Also sometimes load zttranscode and wct4xxp, and oter times wct4xxp only... it's running centos 4.4, libpri 1.2.4, zaptel 1.2.17.1 and asterisk 1.2.18. with a TE212P. Can somebody help me? Regards.

Hi. I'm running the 9.1-RC1 release. At the end of the boot sequence, I see: mps0: mpssas_scsiio_timeout checking sc 0xffffff8000759000 cm 0xffffff8000784380 (probe19:mps0:0:19:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 length 0 SMID 240 command timeout cm 0xffffff8000784380 ccb 0xfffffe0006918000 mps0: mpssas_alloc_tm freezing simq mps0: timedout cm 0xffffff8000784380 allocated tm

I was just looking to see if anyone else has seen this problem as well. When asterisk starts up it loads the zttranscode module. The problem exist when I use the init scripts to stop asterisk and then use the zaptel init script to unload modules. Since the zaptel init script didn't load the zttranscode module it will error out when trying to unload the modules. I built

Hello. I have a TE212 configured in E1 mode. This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured): cat /proc/zaptel/2 Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN 25 TE2/0/1/1 Clear 26 TE2/0/1/2 Clear 27 TE2/0/1/3 Clear 28 TE2/0/1/4 Clear 29 TE2/0/1/5 Clear 30 TE2/0/1/6 Clear

I have a Debian printer server implemented with SAMBA and CUPS. The total amount of printing jobs is high (about 600 jobs per hour). The SAMBA configuration is standard. The main problem is that the smbd processes which are created for the printing requests collapse the processor, provoking a slow printing service. ?Could anybody help me about which are the reasons of this behaviour? Thanks

En realidad ya nos conocemos, al menos de vista, yo he ido a 2-3 quedadas del grupo local en Madrid. Y con Carlos Gil he coincidido en el Medialab y las jornadas de periodismo de la UCM, en el que presentaba mi proyecto http://transparenciadecuentaspublicas.es/ (más que nada por si alguno me podéis poner cara) Ok, yo creo que la reunión del 29 por la tarde es muy buen momento para hablar de algo

Hola Miguel, Sí, no sé por qué pero en tu primer correo no te busqué en la red, pero lo acabo de hacer y claro que te conozco. Entonces el miércoles de la semana que viene lo hablamos en la reunión. Como hay otro tema del que también se quería hablar (el curso StatLearning) lo voy a poner en la agenda y así nos acordamos de todo. Gracias, Carlos Ortega www.qualityexcellence.es El 20 de

Hi, We have a PRI connection & when its was on test networks we had echo problems withoutside line. So I bought a TE212P card resolve the echo problem. Which did to an extent. Its using asterisk 1.2.18 & RHEL4-Update 4. But now when we are live, there is a terrible echo between 2 SIP calls. If I call the same extension from outside the voice is clear. I am not sure whats

Hi, would be glad to be contributing with this question to all the comunity. I?m having a weird issue, suddenly I get channels on IDLE 0x00 state until I do a dahdi restart. Trying to do a call trace to see whats going on deeper, I get surprised when tried to open the .call file to see the log this is incomplete. This is what I see [root at localhost telefonica]# nano

Hi to all, I actually have an asterisk server configured to write CDR mysql records in the same machine (localhost), but I want to write this records to another machine also in mysql at the same time, It is possible? It means that I want save the records in both machines. Thanks in advance. Ricardo Melendez -------------- next part -------------- An HTML attachment was scrubbed... URL:

Good Day I having problems with the samba, when I go to add to a machine windows xp to the dominio some errors appear in messages log of the system, the machine windows xp enters in the dominio but they anypeople can make logons and is shown me an error saying that the dominio was not found on windows xp machine. The errors --- Nov 23 11:06:31 instituto smbd[17752]: getpeername failed. Error

Hi: I want to have conference call with asterisknow and need 2 ports E1.Which Digium card is better?TE212 or TE220.I haven't problem with motherboard. Regards. --------------------------------- Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi to All, I dont know much about PCI express slots in newer Servers, my doubt is if the Digium and Sangoma PCI express cards, are compatible with the x8 PCI express slots that come in the HP Proliant ML150 G5 server. Thanks in advance. Ricardo -------------- next part -------------- An HTML attachment was scrubbed... URL: