asterisk users - May 2013 - mfcr2 channel state IDLE 0x00 and call trace log file not ended ??

Hi, would be glad to be contributing with this question to all the
comunity. 

I?m having a weird issue, suddenly I get channels on IDLE
0x00 state until I do a dahdi restart. 

Trying to do a call trace to
see whats going on deeper, I get surprised when tried to open the .call
file to see the log this is incomplete. 

This is what I see


[root at localhost telefonica]# nano
chan-9-backward-804-20130507123100.call
..... 

[12:31:01:846] [Thread:
3067460464] [Chan 9] - Getting ANI digit 3
[12:31:01:846] [Thread:
3067460464] [Chan 9] - ANI so far: 1152723, expected length:
10
[12:31:01:846] [Thread: 3067460464] [Chan 9] - MF Tx >> 5
[ON]
[12:31:01:846] [Thread: 3067460464] [Chan 9] - scheduled timer id
13 (mf_back_cycle)
[12:31:01:906] 

(I deleted the first part just for
being more readable, but I didnt deleted the end its just has its end
was somehow incomplete. 

this is what I get from other call in the same
situation. 

[12:30:57:242] [Thread: 3067214704] [Chan 12] - MF Rx << 6
[OFF]
[12:30:57:242] [Thread: 3067214704] [Chan 12] - MF Tx >> 5
[OFF]
[12:30:57:302] [Thread: 3067214704] [Chan 12] - MF Rx << 7
[ON]
[12:30:57:302] [Thread: 3067214704] [Chan 12] - Attempting to
cancel timer time$
[12:30:57:302] [Thread: 3067214704] [Chan 12] - timer
id 12 found, cancelling i$
[12:30:57:302] [Thread: 3067214704] [Chan 12]
- Getting ANI digit 7
[12:30:57:302] [Thread: 3067214704] [Chan 12] -
ANI so far: 1148567, expected l$
[12:30:57:302] [Thread: 3067214704]
[Chan 12] - MF T 

just like "cutted" 

but then I found some complete
logs of those same "RX: 0x00 state" calls... 

cat
chan-30-backward-428-20130514144454.call 

...... 

[14:44:56:300]
[Thread: 3067771760] [Chan 30] - Getting ANI digit 1
[14:44:56:300]
[Thread: 3067771760] [Chan 30] - ANI so far: 1145043471, expected
length: 10
[14:44:56:300] [Thread: 3067771760] [Chan 30] - Done getting
ANI!
[14:44:56:300] [Thread: 3067771760] [Chan 30] - Requesting change
to Group II with signal 0x33
[14:44:56:300] [Thread: 3067771760] [Chan
30] - MF Tx >> 3 [ON]
[14:44:56:300] [Thread: 3067771760] [Chan 30] -
scheduled timer id 16 (mf_back_cycle)
[14:44:56:360] [Thread:
3067771760] [Chan 30] - MF Rx << 1 [OFF]
[14:44:56:360] [Thread:
3067771760] [Chan 30] - MF Tx >> 3 [OFF]
[14:44:56:420] [Thread:
3067771760] [Chan 30] - MF Rx << 1 [ON]
[14:44:56:420] [Thread:
3067771760] [Chan 30] - Attempting to cancel timer timer
16
[14:44:56:420] [Thread: 3067771760] [Chan 30] - timer id 16 found,
cancelling it now
[14:44:56:420] [Thread: 3067771760] [Chan 30] - MF Tx
>> 6 [ON]
[14:44:56:420] [Thread: 3067771760] [Chan 30] - scheduled
timer id 17 (mf_back_cycle)
[14:44:56:480] [Thread: 3067771760] [Chan
30] - MF Rx << 1 [OFF]
[14:44:56:480] [Thread: 3067771760] [Chan 30] -
MF Tx >> 6 [OFF]
[14:44:56:480] [Thread: 3067771760] [Chan 30] -
Attempting to cancel timer timer 17
[14:44:56:480] [Thread: 3067771760]
[Chan 30] - timer id 17 found, cancelling it now
[14:44:56:480] [Thread:
3067771760] [Chan 30] - scheduled timer id 18
(r2_answer_delay)
[14:44:56:640] [Thread: 3067771760] [Chan 30] -
Attempting to cancel timer timer 18
[14:44:56:640] [Thread: 3067771760]
[Chan 30] - timer id 18 found, cancelling it now
[14:44:56:640] [Thread:
3067771760] [Chan 30] - calling timer 18 (r2_answer_delay)
callback
[14:45:12:244] [Thread: 3052403568] [Chan 30] - CAS Tx >>
[ANSWER] 0x04
[14:45:12:244] [Thread: 3052403568] [Chan 30] - CAS Raw
Tx
>> 0x05
[14:50:53:853] [Thread: 3052403568] [Chan 30] - Attempting to
cancel timer timer 0
[14:50:53:853] [Thread: 3052403568] [Chan 30] -
Cannot cancel timer 0
[14:50:53:853] [Thread: 3052403568] [Chan 30] -
CAS Tx >> [CLEAR BACK] 0x0C
[14:50:53:853] [Thread: 3052403568] [Chan
30] - CAS Raw Tx >> 0x0D 

and the same for this other channel.. 

....


[14:50:22:417] [Thread: 3067771760] [Chan 31] - Attempting to cancel
timer timer 18
[14:50:22:417] [Thread: 3067771760] [Chan 31] - timer id
18 found, cancelling it now
[14:50:22:417] [Thread: 3067771760] [Chan
31] - calling timer 18 (r2_answer_delay) callback
[14:50:22:418]
[Thread: 3055217520] [Chan 31] - CAS Tx >> [ANSWER] 0x04
[14:50:22:418]
[Thread: 3055217520] [Chan 31] - CAS Raw Tx >> 0x05
[14:50:54:194]
[Thread: 3055217520] [Chan 31] - Attempting to cancel timer timer
0
[14:50:54:194] [Thread: 3055217520] [Chan 31] - Cannot cancel timer
0
[14:50:54:194] [Thread: 3055217520] [Chan 31] - CAS Tx >> [CLEAR BACK]
0x0C
[14:50:54:194] [Thread: 3055217520] [Chan 31] - CAS Raw Tx >> 0x0D


Is this call ended normally? Could it be an irq or hardware issue? Its
happens only in the first port, which is connected to the teco, but the
2nd port which is connected to a samsung pbx didn?t get problems. Would
be glad if anybody put some light on it. 

By the way this is my
configuration: 

Asterisk 10.5.0 (but also tried in 1.8 and 1.6 with the
same results) 

HP ML110 G7 server 

lspci -v 

.. 

0e:08.0
Communication controller: Digium, Inc. Wildcard TE210P/TE212P dual-span
T1/E1/J1 card 3.3V (rev 02)
 Subsystem: Device 0003:0000
 Flags: bus
master, medium devsel, latency 64, IRQ 11
 Memory at fbff0000 (32-bit,
non-prefetchable) [size=128]
 Kernel driver in use: wct4xxp
 Kernel
modules: wct4xxp 

.. 

cat
/etc/dahdi/system.conf

span=1,1,0,cas,hdb3
cas=1-15,17-31:1101


span=2,0,0,cas,hdb3
cas=32-46,48-62:1101
echocanceller=mg2,32-46,48-62


loadzone = ve
defaultzone = ve 

nano /etc/asterisk/chan_dahdi.conf


resetinterval=never
context=from-pstn
group=0
;mfcr2_forced_release=yes
mfcr2_logdir=telefonica
mfcr2_logging=all
mfcr2_call_files=yes
echocancel=yes
language=es
signalling=mfcr2
mfcr2_variant=itu
mfcr2_get_ani_first=no
mfcr2_max_ani=10

mfcr2_max_dnis=4
mfcr2_category=national_subscriber
;mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=500
mfcr2_mfback_timeout=8000
;mfcr2_metering_pulse_timeout=-1
loglevel=error,debug,mf
mfcr2_logging=cas
channel
=>1-15,17-31


resetinterval=never
context=from-pstn
group=1
;mfcr2_forced_release=yes
echocancel=yes
signalling=mfcr2
language=es
mfcr2_variant=itu
;mfcr2_get_ani_first=no
mfcr2_logdir=samsung
mfcr2_logging=all
mfcr2_call_files=yes


mfcr2_max_ani=20
mfcr2_max_dnis=20
mfcr2_category=national_subscriber
mfcr2_logging=cas
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=500
loglevel=error,debug,mf
context=from-internal
channel
=>32-46,48-62 ; 

Any suggestions? 

Thanks in advance. 
-- 

LEONARDO
RIVANERA 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130514/4c33f89d/attachment.htm>