similar to: Polycom 330 + Asterisk, phone locks up. * key will do it

How do you guys like the 330 and 320? I've been looking at this as my "standard" phone, since it's relatively cheaper than the 501 which is the phone I currently push with my PBX systems. Most of my customers do not use more than one line per phone, so having 3 lines on the 501 is not necessarily useful. Also, I read that the phone offers TLS security. What does that mean?

All, Has anyone experienced a problem with the Polycom 650 phone freezing when you try to do a transfer? I am running asterisk 1.2.20.1 with Polycom SIP version 2.1.1.0052 and boot rom version 3.2.3.0002. I have Polycom 501 phones that work perfectly with the same software versions. The 650 phone; when I hit transfer the caller is placed on hold and the phone is still operational. As

Hello, At one of our locations, we have started to see Polycom 501s (running 1.6.7 firmware) randomly reboot. We have taken packet traces of the phones to determine if there is something odd in the Layer 2 or 3 of the network that might cause it, and have not seen anything strange. There are no errors on the ports. This appears to be affecting POE powered as well as AC powered phones. The Polycom

Dear all, Just wanted to know if any one had deployed the Grandstream GXW 4024 yet. Wanted to hear any feedback and/or problems with this unit that you may have experienced. Thank you. -- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd www.emergen.biz

Is it normal for a PRI to reset the inactive B channels periodically(like once every hour). I'm seeing on my asterisk console successful restarts, just curious as this is all new to me. ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

I just installed the new version of SJPhone and it appears that it cannot work with * anymore? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040111/25c910bb/attachment.htm

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

T.38 is often put forward as the solution for reliable FAX over VOIP. Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call? Thanks. Jim James H. Thompson jht@lj.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Folks, First of all, this email is sent to -users and -biz, but please follow- up to the -biz list only. I have set the reply-to, but I fear mailman will strip it off ... Please don't flame me for posting to -users, I'm just not sure who lives on -biz as the (signal/noise | net.kook | troll) factor has been pretty bad on that list lately (poor Rehan!!) ;-) Telephony Depot

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

What are your experiences with faxing through Asterisk to the PSTN? We are using g.711u as a codec, and are originating/terminating with Broadvox as well as through our own PSTN gateways. We have had some luck with incoming faxes coming into our network from Broadvox DIDs. They work 50% of the time. Not sure yet on PSTN incoming since nobody that is using FAX is in our local rate centers.

I'm trying to get a Carrier Access Corp. Channel Bank I working with a Digium T100P without success. What is stranger is that the status lights on the channel bank and T100P seem to change almost each time I power cycle the channel bank or reset the T100P. The channel bank has three status lights: T1, Framing, Status. T1 is green, Status is yellow, and Framing is usually red but sometime

I just got a spam from telephonydepot (which I invited to spam me, so I guess I have to call it legit marketing :) ), and they have some new device that is meant to be a surveillance camera with audio, but the interface is POE and SIP! A cool idea. Anyone playing with this toy yet? I am trying to wrap my head around how asterisk might fit with the model of this camera being

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

Hi List; Any one can advise me to a good link to see and buy Polycom IP Phones? Also, if I need support (in case the Phone was damaged and need to replace, so the warantee), so which web can provide that? I do not need to buy from one and he is not responsible for support. Regards Bilal ____________________________________________________________________________________ Be a better

Will the FXS cards that work with asterisk handle rotary? Are there any channel banks that can convert rotary to touch tone (like some sorta bridge)? The goal is to be able to log input from rotary phones. Full PBX functionality would be nice but... (It's for a project, not for serious production). -- // Ethan O'Toole //