similar to: Question on Asterisk and ISDN

Hi all, using latest asterisk-svn I want to reflect an video call incoming via an PRI EuroISDN channel to another outgoing PRI channel, and I want the the outgoing channel to have the exact same bearer capability < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) < Ext: 1 Trans mode/rate:

Keywords T1 Q.931 isdn disconnect cause codes itu standard libpri Dont know if anyone wondered what q.931 cause codes are but i wishwe could get these back into the dial plan as a var Standard Q931 Codes Decimal Value Hexadecimal Value Definition 1 01 Unallocated (unassigned) number. This number is not in the routing table or it has no path across the ISDN cloud (network). 1. Check routing

Hi all, first off all - sorry for the cross posting - i did already posted this message to asterisk-dev - after that i realized that it isn't really a -dev related question - more a -users questions. So ignore it on -dev .... we have the following setup PSTN 3 PRI Lines <---> Asterisk (1.4.22) <---> Siemens HiCom <---> Bosch Integral The Asterisk Machine

Hi! For demonstration purposes I try to bridge an incoming video call from a 3G mobile handset to another 3G mobile handset using asterisk as "switch". On the incoming call leg I see all expected bearer capabilities (Digital, 64k Transparent, G.7xx 384k video) but on the outgoing call leg the bearer capability G.7xx 384k video get lost and therefore the call is dropped from the mobile

Hi! We planing to by some PRI/BRI equipment to replace our existing telephone system. So I am going to try this: ISDN Card Outgoing Digital Call / Capability: Unrestricted digital information -> octobri -> asterisk -> TE410E -> Internet Provider / Receiver for Capability Unrestricted digital information The question is: Is asterisk possible of transmit this digital call to the

I have a pri comming into a t100p in my asterisk box. I have a second t100p configured as pri_net connected to a nas server. I can route modem calls to the NAS with no problem, but I am concerned about isdn data connections. Will asterisk route 64k isdn calls between 2 t100p's? Also, should I expect worse modem connections than normal? Chad Sawyer -------------- next part --------------

Hi all, general query here --- I'm about to set up an asterisk box for use in Japan but can't figureout if it's all ISDN there or what? I have gathered so far that the two major providers, NTT and KVH both offer ISDN lines with .......INS1500 and maybe INS64 protocols? Not sure... But I'm seeing stuff about J1 vs. T1/E1 .... so does that mean I can't use a Digium card it

Folks, (sorry for overlong lines) I have recently configured one port on my QuadBRI card to work in NT mode with NET signalling configured so that I can use an ISDN telephone on it. I have set up a separate group in zapata.conf and can call the phone and place calls from it like a charm. No problems at all. Problems came up when trying to hold a call and get it back. I turned on "pri debug

If more than one UDI is returned, they are delimited by a carriage return. That is changed to a space, then the lot is iterated over. Each UDI is tested to see if it has the property "block.is_volume=false". If so then that UDI is for the underlying block device and not a logical volume on the device. Signed-off-by: Darryl L. Pierce <dpierce at redhat.com> ---

HAL has been deprecated, and this patch removes all HAL specific calls from the configuration scripts. HAL is still present in the Python scripts, but will be removed in a different patch. Signed-off-by: Darryl L. Pierce <dpierce at redhat.com> --- ChangeLog | 3 + configure.ac | 2 - ovirt-node.spec.in | 1 -

Hi, I'm in big trouble I've got two serwers with Asterisk 1.03 both serwer with 2 ISDN cards. When I call isdn server card and then choose other msn (disa) I can make connection with other phone (I've got standard ISDN PBX). But echos are horrible. My configuration: Athlon 2.0 256 RAM 2 HFC cards i4linux. mandrake 10.1 kernel 2.8.1 and second server Celeron 2.6 256 Ram 2

I am one of the few people left in the US with a ISDN connection to the internet. (Internet cable has been promised "Real Soon Now" for a couple years). Worse, my home network runs on a decrepit Cisco 2500 series router, and is double-natted via a firewall, which is why I currently use iax to call anywhere. I have been making ever-increasing use of my asterisk PBX, and I'm ready

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zoltan Szecsei Sent: zaterdag 16 juli 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode? >> Maybe this is rather a hardware question,

Hello. It seems very very strange to me that nobody talks about connecting ISDN lines to asterisk using a device with RCAPI Support. There are some devices (most of them isdn routers, like the famous Cisco 800 family) that support this protocol. It basically is an ISDN to IP gateway. There used to be software that used this technology to send and receive faxes, act as voicemail and even ISDN

asterisk-users-request@lists.digium.com is believed to have said: > >The active cards do the ISDN protocol stuff on board, so the host CPU/driver >does not need to do that -> better performance, less interrupts. >The AVM cards do not have such DSPs on board, so no echo-cancel. >But the Eicon DIVA Server cards do. They do analog Fax/Modem, echo-cancel, >DTMF-detection, voice

I just wanted to let you know that it's possible to use Eicon DIVA PCI 2.01 ISDN cards (not "server" divas) with asterisk. First thing to do is to load the module. If you have two of these cards, you should do it like that: modprobe -v hisax protocol=2,2 type=11,11 And now you can have up to 4 incoming calls with two cards (try calling yourself and see if anything gets into

Good day, anyone out there running an ISDN pbx behind an Asterisk server with an AVM active card? At this moment Asterisk is connected to the internal ISDN bus of the PBX, but I want to control the calls coming in from the outside, before sending them of to the PBX. Any BTDT is greatly appreciated. rgds pos

If a device is a removeable media device, then o-c-storage will now check if there's media present before attempting to get the storage size for the device. Signed-off-by: Darryl L. Pierce <dpierce at redhat.com> --- scripts/ovirt-config-storage | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/scripts/ovirt-config-storage b/scripts/ovirt-config-storage index

Hello all, New to the list, Asterisk and this wonderful world of convergence. From reading the docs, list and websites I hopefully correctly understand that I can use a plain cheap isdn4linux supported ISDN (passive) TA to hook up the PC to the ISDN line from the telco (FXO card?). Next in the PC I also need a FXS card like a Digium TDM10B or PhoneJack so I can hook up an analog phone to it. In

Hello, After searching the archives, I''ve found only two messages regarding this case, but there were no solution. I have a similar problem, so I try to ask here. I have twi HFC chipset ISDN cards in my pc: 0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus