similar to: 2 asterisk servers, how to connect them together?

Does such a beastie exist? I've tried a couple of UT Starcom WiFi SIP phones (the F1000g and F3000 respectively), and found them both to be seriously lacking - regular crashes (especially the F3000), poor battery life, and poor reception in particular. However, whilst SIP phones are great, I'd really like an IAX2 phone if there is one, as I can make that work "natively" though

I have 2 asterisk servers - serverA and serverC - connected via IAX2. On serverA, I have a "telemarketer hold" extension which, if I transfer a caller into it, loops around playing music & "please wait" messages, until they give up & hang up the phone. Also on serverA, I have a custom devstate, which lights a lamp on a phone connected to serverA, which tells me if

I run a phone in a remote office using the IAX2 protocol. It mostly works fine; except that every 5 mins it loses connection with Asterisk, before reconnecting 30 seconds later; rinse & repeat. Using the IAX2 debugging, I'm seeing this a lot: Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE Timestamp: 00018ms SCall: 04050 DCall: 00000

I use the E-series Nokia phones on my Wireless LAN. The e series have sip agent On 8/20/07, asterisk-users-request at lists.digium.com <asterisk-users-request at lists.digium.com> wrote: > Send asterisk-users mailing list submissions to > asterisk-users at lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

Hi folks, I've been playing around with an Asterisk server in my office for a few weeks now, and I've got it pretty much nailed down the way I want it, which is nice. One of the features I'm using is the ability to switch different contexts in & out of the dialplan on a schedule. So, for example, I've got the "official" tel number ringing my desk phone between

Is there any option in Asterisk distribution of this? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120531/8fac6a22/attachment.htm>

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c:

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_usb

I now have an OpenVox A400P and it is working well. Thanks to Ade Vickers for the recommendation, which I second. However, I need to make a slow transition between a conventional multiple-extension setup and a full VoIP network on these premises. So at the moment the Asterisk box shares the PSTN connection with several conventional analogue handsets. The desired result for an incoming call is

On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

I recently implemented a simple "spam trap" extension for telemarketers - once identified as a telemarketer (usually they ask to speak to the person in charge of recruiting/website/purchasing/etc.), I simply offer to put them through to the person in question, & dump them on a special extension which plays music for 15 seconds, then 1.5s silence, then a "please wait, we're

Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate

Hi all, I'm trying to resolve a weird issue with SIP routing. I have a number of SIP trunks, from a selection of providers, all of which are registered in sip.conf: [general] context=default allowguest=no allowoverlap=no udpbindaddr=0.0.0.0 tcpenable=yes tcpbindaddr=0.0.0.0 transport=udp bindport=15060 srvlookup=yes allowsubscribe=yes

On Feb 15, 2014, at 6:46 PM, Greg Vickers wrote: > Thanks! I've attached the file to this email (bcmxcp_usb.output2014160926.gz), it ran for 12 seconds, and looks like it's looping by that time. I'm not sure what to look for, does grepping for 'Yes' show the variables that the driver can pull off this UPS? The boolean variables seem to be indicated by "Yes". I

On 16/02/14 00:38, Charles Lepple wrote: > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: >> The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. > Tim: spot on. > > Greg, > > If you want, you can capture the -DDDD output

The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. You can get the comm spec for XCP from the nut site if you want to delve deeper. I'd give more specifics, but am out of town and only working from memory at the moment . . . - Tim On

Dear all, I'm trying to get a Brownian bridge kernel (kernelbb) for each combination of two consecutive animal locations (see commands below) and put them, with a loop, inside a list. It works well at the beginning but after 42 runs, it appears the following warning : >Error in seq.default(yli[1], yli[2], by = diff(xg[1:2])) :  >  invalid (to - from)/by in seq(.) I looked at the

Can anyone tell me what might cause callers on hold in a queue to drop into agents voicemail boxes? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071217/ae6cba5a/attachment.htm