similar to: TDM400P FXO click sounds

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

How I change my configuration to reduce this issue. I have this setting on my zapata.conf signalling=fxs_ks group=1 callgroup=1 pickupgroup=1 channel=1 signalling=fxs_ks group=2 callgroup=1 pickupgroup=1 channel=2; singalling=fxs_ks group=3 callgroup=1 pickupgroup=1 channel=3; singalling=fxs_ks group=4 callgroup=1 pickupgroup=1 channel=4 and for outbound calls I have this context on my

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

I have seen mention of limiting a single server to no more than 100 trunks. With Sangoma having an 9 T1 card that kind of blows that limit. How many T1's can we have on a single server assuming dual Xeons? Our application calls for 122 IP Phones and 120 analog ports for faxes. Its an executive suite and we need the fax ports. No way around that requirement. Thanks, Allen.

Hello all, iam setting up an asterisk box behind NAT to get SIP calls from outside or internet. In that eschema i can setup SIP calls but, while from the outside nat people can hear me, Im unable to listen anything behind NAT. Out of firewalls settings( I checked this to port fowarding) what can i do to get this working fine?. Thanks G.

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

Hello all, I post this issue thinking too that could help other people on an asterisk deployment over distributed offices considering both quality, prices, devices and so. Well, i am working on a deployment of a telephony system based in asterisk. My company have a central office with seven remote offices connected all through a VPN. To reduce and evaluate costs i consider solutions like:

Hello, I've tried to transfer a IAX call to a number configured on a traditional PBX, but it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk in the following way: IAX/SIP client --> Asterisk (FXO) --> (FXS) traditional PBX ---> OFFICE Phones Asterisk is connected to the PBX with an internal number configured inside it. In other words i keep an

Hellow everyone, here's an other newby question. I've got a * configured with the card in the subject line. At times Asterisk fails to notice a disconet from the incoming line going into one of the FXO ports. Consequently it just keeps the line off-hook for ever and that causes my provider to mark the line aut of order. Is there any way to "help" Asterisk notice the disconect?

I've spent all day today trying to fix an echo problem and I've made no ground whatsoever. I have Digium TDM400 with 3 FXO & 1 FXS. I've tried this computer at two completely different sites with different phone providers. I've tried compiling & installing different versions of Zaptel (currently running 1.4.0, started at 1.2.9 and worked my way up). I've tried

Hello, my config : aah 2.6 (asterisk 1.2.4) , centos 4.2, 1 TDM11B (1 Fxo / 1 fxs ), 1 phone, 1 softphone I'm in France When someone from PSTN calls and hangs up before the call is answered, internal extension keeps ringing until timeout occurs. PSTN line keeps busy. Hangup detection doesn't work. I've played with different paremeters (callprogress, busydetect, busycount,

Hello my friends... We are having some problems with the fax in our asterisk server... We have: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P This digium card has 3 FXO ports and 1 FXS port where we have a fax machine connected! The problem is that we can receive fax very good, but we can't make any outbound fax call, in fact, our asterisk get freezed

Hi, I'm installing an Asterisk box with a TDM2400P in Brazil. I can make analog phones work while lines are not working. Since I do not know anything about brazilian lines, is there anybody who can tell me what is wrong/missing in my conf files (below)? TIA Giorgio _zaptel.conf:_ fxoks=9-16 fxsks=17-24 defaultzone=br loadzone=br* * _zapata.conf:_ context = inbound_zap echocancel = 128

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include

Good Day list, I have worn out my google toolbar today looking for a way to determine which group an incoming call belong to, but have not been very fruitfull in my endeavors. I am trying to figure a way to determine which group the incoming call that I just answered is part of so I can do some branchinbg scripts in my dialplan. I know I can control my dialplan logic by creating separate

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

I figured I'd answer my own thread and document what it took to get rid of the echo at my location. For those of you trying to get rid of echo, let me tell you, "what worked for that guy, probably won't work for you". I think we've all heard that before, and it's true. Let me assure you that echo can be removed from your phone lines. At 20 hours into my 40

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup