similar to: BLF with Aastra

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

I'm in the process of converting our current hybrid key system to Asterisk and Aastra 57i phones. One of the features that seems to be a show stopper for almost everyone in the office is the inability to see who is on the phone. Can someone point in the right direction to setup an XML app on the phone so they can press a soft-button and get a list of extensions and their statuses? I know I can

Hello all, Just wondering if anyone ever solved the Aastra 50-BLF limit when used with Asterisk (any flavour)? I know it's not strictly and Asterisk question - but I'm sure there's plenty of you out there using Aastra's on the end. Cheers, Andrew Thomas dCAP #1473

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

I have 8 aastra phones that are loosing registration. On the phone gui it says 408 as the registation error after a minute or say they register. In the cli it eill say the phone is now unreachable then it will show it registering then available. At first they did it every hour all the phones. After messing with the experation it does it every 15 nin. Any ideas on how to troubleshoot this? I tried

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1:

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

I just noticed the Aastra 57i do something that I haven't seen before. I called from one phone (phone 1) to the 57i. I answered it. Then, I pressed Transfer and dialed the extension for the third phone (in this case a Cisco 7960 in Sip). I did not answer the Cisco, but noticed the caller ID was showing the Aastra (as expected). I hung up the Aastra to complete the transfer and noticed the

Hello all Sorry for the repost, but I believe this is essential for Aastra phones to use directed pickup with BLF in 1.2 (and it's still experimental in 1.4 I think). pickup-mgernoth-2006-07-28.patch.txt If anyone knows otherwise than that this is still required in latest 1.2 or 1.4 please reply with success/failure stories. Any info would be appreciated. We can get directed BLF pickup

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

Hi Everyone, We use the top buttons on Aastra 55i to login and logout from Queues. This is the order: Button 1 = Login to English Queue Button 2 = Login to Spanish Queue Button 3 = Logout of English/Spanish Queues There are indicator LEDs on each of these buttons. Is there anyway we can send a SIP request or some other communication to get the Aastra 6755i phone to keep the LED for login set

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Does anyone have Shared (bridged) Line Appearance working in Asterisk 1.4? Specifically with the Aastra 55i. Specifically, I am using the Aastra 55i with the expansion module. We want to see if other handsets are being used. (BLF) Getting BLF to work would be a great start. It sounds like setting up the hints properly will achieve this. right? Not totally sure how this should be configured.