similar to: Zap Bridge Question

I have a 2 port T1 card doing PRI passthrough, Span 1 answers from Telco, Span 2 sends to my existing phone system(Nortel). My Span1 gets sent to the context from-pri, detailed here: [from-pri] exten => _49XX,1,Set(CALLERID(all)=${CALLERID(all)}) exten => _49XX,2,Dial(Zap/g2/${EXTEN},,twk) exten => _49XX,3,Congestion() exten => _49XX,4,Set(CALLERID(all)="") exten =>

Just FYI: IP address 89.248.168.176 has been trying to use the recently release SIP vulnerability in Asterisk to make outbound calls via our box. They are running a bank account callback scam. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Helpdesk: 817-310-4999 x3 Fax: 817-310-4990 Email: jmann at txhmg.com

Is there a way to override sip peers defined in users.conf with respect to their context and hints? Every extension I have defined in users.conf always gets an @default for the hint priority. Below are asterisk outputs and users.conf entries. In peer 1203 I've set a subscribecontext, which is completely ignored. Thanks for any help. nurscarepbx*CLI> core show version Asterisk 1.4.22

Using Asterisk-1.4.17, Zaptel-1.4.8, libpri-1.4.3 Upgraded this morning, now PRI channels are unstable as hell. After about 5 minutes all asterisk commands on the console refuse to respond, attached is the debug log right before and after the "lock-up", IT occurred between 9:18 and 9:20 AM at 9:20 I restarted asterisk. Box is debian w/ asterisk built from scratch. My setup is

Is the IP 650 sidecar compatible with asterisk? If I pair it with the IP 650 phone, can I have more than 6 "lines" registered w/ the server? Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com ________________________________ This e-mail, facsimile, or letter and any files or

I'm getting the following error over and over on the console: pbx_dundi.c:2975 dundi_rexmit: Max retries exceeded to host Any idea how to troubleshoot this? My network latency is roughly 40-50ms between all hosts in my dundi cloud. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com

Can an asterisk box equipped with a Digium T1 card handle Integrated T1 circuits? I have a T1 with 768k data and the remaining channels voice, can the asterisk box do the Data routing + Voice processing? It's only going to support 4-5 users(the voice channels won't all be active obviously). ________________________________ This e-mail, facsimile, or letter and any files or attachments

I'm running some mysql queries on the standard sql logging of calls, and am interested if anyone has any they'd like to share to get good statistics. I'm interested in # of calls per day, based on DST. Number of Calls per day based on SRC, avg duration of calls, etc.. Thanks. Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999

Looking for two things: 1. Anyone that has dialplan logic for an executive assistant. My owners want their extensions to ring on her phone, and be very obvious to her which extension is ringing. They also want her to have presense. She's got Polycom IP 650 with sidecar, they have IP 550 phones. Thusfar I've got her registering to 4 extensions. Each extension is labeled with an

Does anyone have a recommendation for a headset that plugs into the Mic/Line-out port on a PC? Ideally something like the Plantronics SupraPlus. I'd prefer Monaural instead of stereo, and cheap in price but not in quality. Thanks for any suggestions... Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at

Any advise on troubleshooting this: Oct 29 02:25:58 nurscarepbx kernel: wanpipe2: OOF alarm is OFF Oct 29 02:25:58 nurscarepbx kernel: wanpipe2: RED alarm is OFF Oct 29 02:26:05 nurscarepbx kernel: wanpipe2: RAI alarm is OFF Oct 29 02:26:05 nurscarepbx kernel: wanpipe2: RED alarm is OFF It happens nightly, and I have to reset asterisk to "clear" it. Zap/Dahdi channels wont' work

Using the default features.conf setup, if I include parkedcalls in my dialplan, and a call gets parked, and times out, where does the call go? Does it go to a timeout extension in parked calls, or does it go to a timeout extension in the original context? (Using an AEL based dialplan similar to below). -- context internal { ... ... t { jump 600 at

Is there any way that I can have an admin user hit * and then Mute all other users in a meetme conference? Sort of a moderator function? I know it can be done with MeetMeAdmin, but as I see it that requires a separate extension to dial, unless I've got the logic wrong? If it can be done in a single extension please show examples. Thanks. ________________________________ This e-mail,

[priv] type=3Dfriend dbsecret=3Ddundi/secret context=3Dlongdistance Hope this helps, in your case Dundi will save you a world of work on configuring that many systems, in fact if you structure Dundi like spokes around a small number of master servers, the config gets real easy.Let me know how it goes. On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote: > > >

[priv] type=friend dbsecret=dundi/secret context=longdistance Hope this helps, in your case Dundi will save you a world of work on configuring that many systems, in fact if you structure Dundi like spokes around a small number of master servers, the config gets real easy.Let me know how it goes. On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote: > > > >

Is there a way to tell asterisk, via a sip.conf peer, what IP address to send a packet out of? I've got multiple NICs in my box, each with it's own public IP. I need the SIP messages to originate from any one of the IPs depending on which number was originally called(and therefore where the packet originally came from). My fear is that it will listen on all IPs fine, but only respond

I've got a couple of extensions in users.conf that have both SIP and IAX access(IAX softphone, SIP hard phone). I'd like to setup my dial string to "check" to see which they are actively registered with, and send the call appropriately. Right now I have: Exten => _4xx,1,Dial(SIP/${EXTEN}&IAX2/${EXTEN}) But not all phones have both techs, so there is a lot of

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]:

I have a ton of Nortel MICS/CICS phone systems and am looking for an easy way to integrate them. Two questions arise: 1. Is it feasible to use asterisk as a Man in the Middle for a T1 PRI system? The idea is to intercept outbound calls from the Nortel PBX and redirect them via VoIP to another asterisk box at another branch transparently(thus saving the LD cost). Otherwise I'd pass

Anyone know if Rhino is planning on supporting zaptel 1.4 anytime soon? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further