similar to: perl script to generate new sip.conf users

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

Hi All, I'm running 1.2.9.1 and have a sip user setup with accountcode=4444 in the context. lab1*CLI> sip show peer 1234 * Name : 1234 Secret : <Set> MD5Secret : <Not set> Context : sip1004 Subscr.Cont. : <Not set> Language : Accountcode : 4444 AMA flags : Unknown CallingPres : Presentation Allowed, Not Screened Callgroup

Hi All, I'm running an AGI, calling a perl script the does number lookups to a remote server. I would like to put a timeout in the script. The problem I'm running into is if the DNS server is not responding, the script hangs and waits for 30 seconds before returning to the Asterisk dialplan. I would like a timeout of 1 second, then return. Here is my clean script:

Hi All, I'm using asterisk 1.2.9.1 and mysql 3.23, asterisk add-ons 1.2.3. All seems to work normally with realtime voicemail, reads vmbox parameters from the db fine. When I try to change the password, asterisk operates normally, "enter new password" ok, "re-enter new password" ok, "password has been changed" There are no entries in the mysql.log setting the

> what is the sip.conf for 1239 > which I'm going to assume is a extension on the TNT > > Barry > > JR Richardson wrote: > > Hi All, > > > > I have a lab setup with two asterisk servers and a MAX TNT in the > > middle like this: > > > > asterisk sip >< sip TNT pri >< pri asterisk exten 1239 is the CID Number from the

Hi All, I have a lab setup with two asterisk servers and a MAX TNT in the middle like this: asterisk sip >< sip TNT pri >< pri asterisk The TNT is running 11.0.6 and the asterisk servers are running 1.2.9.1. I can get calls to pass from asterisk sip to tnt to pri to asterisk but not the other way. The call from asterisk to pri to tnt is good, the TNT is passing SIP invite to the

Hi All, I have a Cisco 2600 PRI gateway being hosted on an Asterisk server. The PRI on the cisco is pointing to a customer legacy PBX, the SIP VoIP side of the cisco is pointing to an Asterisk server (1.2.X). In Asterisk, the SIP peer is setup with callerid="some name"<5551212> In a SIP call from the cisco to asterisk, there is no CID name info in SIP debug, so Asterisk

> I'm using asterisk 1.2.9.1 and mysql 3.23, asterisk add-ons 1.2.3. > All seems to work normally with realtime voicemail, reads vmbox > parameters from the db fine. When I try to change the password, > asterisk operates normally, "enter new password" ok, "re-enter new > password" ok, "password has been changed" > > There are no entries in

On Wed, Jan 20, 2010 at 2:42 PM, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I'm using Asterisk 1.4 branch and checking the status of some SIP > Peers with the functions ${SIPPEER(101:status)} and the result is "OK > (48 ms)". ?Seems to work fine. > > Now I would like to use the function CUT to set a variable with the > 'OK'

JR Richardson Engineering for the Masses> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of asterisk-users- > request at lists.digium.com > Sent: Saturday, March 01, 2008 12:00 PM > To: asterisk-users at lists.digium.com > Subject: asterisk-users Digest, Vol 44, Issue 1 > >

Hi All, Something happened on one of my 1.2.9.1 systems, SIP between * and Cisco Call Manager 4.1, leaving hung or open SIP sessions. No problem now, we found and corrected the problem. But while these hung sessions were increasing to around 480 to 500 sessions, I started getting "too many open files" on the asterisk console and sporadically could not establish new SIP connections.

On 6/26/07, JR Richardson <jmr.richardson at gmail.com> wrote: > Hi All, > > I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router > with a PRI card in it, handing off to a PBX and vise verse. Calls in > and out are working fine except for DTMF from Asterisk to the 2600. > DTMF from the 2600 to Asterisk is fine. > > Here are the Asterisk console warnings

> -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Saturday, June 17, 2006 2:30 PM > To: asterisk-users@lists.digium.com; Douglas Garstang > Subject: Voicemail with NFS (working, I think) > > I'm using a stand-alone VM server and exporting the VM files ro for > MWI function only. All my registration servers mount the remote

Hi All, I'm running 1.2.9.1, is setvar= implemented in iax.conf in a later version of asterisk? If so, which one? Thanks. JR -- JR Richardson Engineering for the Masses

OK this was an easy one to fix. All I had to do is RTFM. Note on the wiki: ATTENTION: Make sure you take a look at bug report 7144 Just do what Kevin said, include the regcontext in whatever static context you have the priority 2 extension and don't make a static regcontext in extension.conf. Let sip module do the rest. Works great. Thanks Guys. JR On 12/5/06, JR Richardson

Is this with Asterisk in the RTP stream? Is it doing any transcoding? > -----Original Message----- > From: JR Richardson [mailto:jmr.richardson@gmail.com] > Sent: Tuesday, April 18, 2006 9:34 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Asterisk Performance 350 Concurrent > ChannelsWorking Nicely > > > Hi All, > > This is a performance

On 1/28/08, JR Richardson <jmr.richardson at gmail.com> wrote: > > You need to take a step back and first test the script without using > > MRTG. Execute it like this: > > # /opt/bin/asterisk-mrtg -h localhost -u XXX -p XXXX -1 SIP -2 Zap > > 10 > > 10 > > 10 > > 10 > > > > You should get 4 lines of numbers. That respresents your SIP

Hi All, Anyone know the sip header to send to a Linksys to resync it's config file? Thanks. JR -- JR Richardson Engineering for the Masses

Hi All, Strange issue, recently I started getting a lot of .lock files in the voicemail /INBOX folder preventing proper access to voicemail. I can delete the .lock files and everything is normal. After searching around, I found some SIP lock file stuff but nothing specific to voicemail. Can someone point me in the right direction to resolve this? I'm runnning 1.2.9 on Debian Sarge.

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !