similar to: No subject

AT+VRID=3D1 OK DATE=3D0218 TIME=3D1524 NAME=3Dxxxxxxxxxx NMBR=3Dxxxxxxxxxx ANID=3D<NONE> USER=3D<NONE> PASS=3D<NONE> CDID=3D<NONE> NDID=3Ds What the hell!? Why is 'NDID=3Ds'? I've noticed the dialplan is adding = 's' for Follow-Me'd and Ring Group'd calls as well, and I found the explanation = for that, but why on earth here? All

Hi guys I have a lovely little irritation on my hands. I?ve been trying to set up DID-based routing in Hylafax, and I?ve come across one hell of a headache:

I try to use hylafax to send fax, but i encounter with TRAINING failed error I try many times to send a fax to fax machine whose type is Canon Laser Class 9000 Series I always failed with the TRAINING failed error but succeed 2-3 times I also send fax to another machine whose type is Panasonic And I failed all the time with the same error without any success When using windows's fax modem to

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

Hi!I've a question: I've 2 asterisk, I want pull the ethernet wire and then reconnect it after 5 second, using the VRRP protocol, where must I set the IP for the connection goes on the second asterisk? I want this: I call to asterisk1, then I pull the ethernet wire down, vrrp makes up the other asterisk but not the audio streaming...the callers are always pointed to asterisk1, but for the

Hi! I' ve this problem: I've 2 asterisks box, asterisk11 and asterisk12, and one wi_fi phone. I call from wi_fi to a X-lite phone on a windows xp.I've setuped the X-lite to my vrrp IP (vrid IP) and the call is ok, I call from the wi_fi to X-lite and from the X-lite to wi_fi. In asterisk panell is all ok, and I listen the voice to the xp and in the wi_fi phone. asterisk12 is my master.

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

On 27/06/2017 00:49, James A. Peltier wrote: > Bind does not have a method to do multi-master replication. All updates must be done via an intermediary service (database). > > In our case, we've used containers and Consul for providing a highly available DNS service. A container will fire up and race for the master lock. It will dump the contents of the database into its named

I have a quick question: It appears that in rgdal v0.7-12 (R version 2.15.1, OSX 10.6.8) writeOGR will not write a shapefile the the current directory. Is this correct? An earlier version of rgdal must have allowed this because I have a older script that used to work, but doesn't now. So, as an example, here is what I get today: > shape = readOGR('.',

Hello When a call comes in, I'd like to fork a Python script that broadcasts a message so that users see the CID name + number pop up on their computer screen, and simultaneously ring their phones. The following script doesn't work as planned: It waits until the script ends before moving on to the next step, which is Dial(): =========== exten =>

Hello - I'm using ATA-186 devices, with RFC2833 DTMF encoding. I am having problems with routines that input long strings of numbers, in that I am getting more than a small number of double digit entries. As an example, I have a section that asks for the user to enter a call forwarding number, and then puts that number into a database. Almost always, there are double digits when the

Bind does not have a method to do multi-master replication. All updates must be done via an intermediary service (database). In our case, we've used containers and Consul for providing a highly available DNS service. A container will fire up and race for the master lock. It will dump the contents of the database into its named configurations and assuming it has the lock will assume the IP

Hello, for my vm I'd like to specify a disk image which would be on an iscsi target. Currently, by using targets directly, I'd just specify the path in /dev/disk/by-path/ip-192.168.1.2:3260-iscsi-iqn.myiqn but how to specify a file which is actually INSIDE this path, ex. /dev/disk/by-path/ip-192.168.1.2:3260-iscsi-iqn.myiqn/myVmImage.img ? I saw that there is another path in

There are two stages in the process of getting callerID information from a standard modem, to be used in Asterisk. The first stage is actually capturing the information from the modem, the second stage is importing the captured data into Asterisk. Capturing the caller ID details from the modem I will presume at this stage, that you have a modem that supports caller ID and it is installed and

this was already debugged and there is no point in searching inside the Firmware. It's not a firmware bug or anything. The proper fix is to do something inside Nouveau so that we don't upset the device and being able to runtime resume it again. The initial thing we do inside Nouveau to cause those issues is to run that so called "DEVINIT" script inside the vbios to initialize

On Wed, Nov 28, 2018 at 05:55:44PM +0200, Mika Westerberg wrote: > On Wed, Nov 28, 2018 at 10:09:22AM -0500, Michael S. Tsirkin wrote: > > Yea all this is weird, in particular I wonder why does everyone > > using dsm insists on saying Arg4 > > when they actually mean Arg3. ACPI numbers arguments from 0. > > > > So it's a bit ugly, and maybe worth fixing but

Hi to all! I have a problem with a nvidia geforce 520mx [NVd0 generation card (0x0d9110a1)] i have on my notebook (samsung 3 series). In practice i'm not able to use it with bumblebee and bbswitch. The dmesg message is: [ 13.507435] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 13.507440] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 13.507448] nouveau

we are tring to install atuodesk 3ds max 9.0/8.0 with the help of wine and "winetricks". Is anybody trying to do so? And is there anybody know how to use the wine to install 3ds max 9.0/8.0 with the help of "winetricks"? [Question] Could someone illustrate that how to use "winetricks" to install .net 2.0 and other windows applications such as atuodesk 3ds