similar to: how to configure zaptel for incoming call

Hi, I am facing problem in configuring D-channel. I did the following configuration for TE-120P card /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 /etc/asterisk/zaptel.conf group=1 signalling=pri_cpe switchtype=euroisdn context=incoming channel=1-15,17-31 DIGIUM card is connected through cable to another end.On placing call from other end to

Hi, I am facing problem in configuring D-channel for TE120P card.I did the following things /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 /etc/asterisk/zaptel.conf group=1 signalling=pri_cpe

Hi all, Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable. Can anybody help me out. Thanx and Regards sanchal singh

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

On 8/23/07, sanchal.singh at alliance-infotech.com Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2

Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2 spandsp-20060903.tar.gz I downloaded and installed the files in the follwing sequence spandsp libsupertone libunicall libmfcr2-0.0.3 is

Hi, I am trying to configure for MFC/R2 for asterisk. With the help of one of the asterisk users group member patrick I am able to install libunicall library. Now, when trying to install libmfr2-0.0.3 it is giving error. On running running command $./configure It is giving error -> can't build without libtiff I downloaded tiff-3.8.2 and installed the libraries but still

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

Hi All, I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show and ztcfg -vv looks ok and the zttool show

Hi, I'm trying to connect to Telewest/Virgin Media with a TE110P using asterisk 1.4.13/zaptel 1.4.6. No matter what I try, my span always appears as PRI span 1/0: Provisioned, Down, Active My zapata.conf is currently ----------------------------------- [channels] echocancel=yes echocancelwhenbridged=no echotraining=yes switchtype=euroisdn contect=from-pri signalling=pri_cpe group=1 channel

We are trying to configure a Sangoma A101 card to allow both incoming and outgoing calls on a UK (BT) ISDN30e line with only 24 channels enabled. At present incoming calls work fine. We can't call out -- we get a BUSY/CONGESTED error. Do we need another context in our zapata.conf? In other words, do we need to reserve, say, channels 17-24 for outgoing calls? I also wonder if the signalling

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

We are a voip terminating company, we're using Channelbank with FXS modules, Rhino, CAC, etc.. What we're wondering is, is how to would you echo cancel a channelbank. Of course we're realizing that cancel'ing on the T1 (on Ast) does no good (we think?) because the analog conversion is at the channelbank. Suggestions? Lowering the gain helps but we're looking for a real solution

Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2 spandsp-20060903.tar.gz I downloaded and installed the files in the follwing sequence spandsp libsupertone libunicall Till here it is compiling and

Hi List, I am from Peru, I have installed an asterisk server in my company with digium card E1 TE120P, I am having issues when i make calls, here the error from my server [Oct 18 09:13:50] WARNING[2377]: channel.c:3232 ast_request: No channel type registered for 'Zap' [Oct 18 09:13:50] WARNING[2377]: app_dial.c:1106 dial_exec_full: Unable to create channel of type 'Zap' (cause

Hi All. I'm working on an * configuration. We require 8 inbound POTS lines, and CT1 or PRI seems like it will be quite expensive at that level. I've read that a T1 Channelbank plus the T100P would be a (the?) way to go for this situation. What is the recommended channelbank for use in this scenario? From searching the archives I see a lot of suggestions to get "a

I am trying to solve the fax problem by installing an E1 channelbank (Megaplex MP-104) It's a box that has 8 x FXS ports and a single E1 port. The plan was to use one of my 4 E1 ports to connect to the Telstra onramp and one to the MP104. I have since discovered however that the MP104 only supports CAS signalling and I am having trouble getting asterisk to work in this mode. Currently we

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2 spandsp-20060903.tar.gz I