similar to: Telco Testing locks up asterisk

I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting slips and ask me to update the clock source. I have my system.conf set as the following but when I run dahdi_scan only the ports on Card 1 are showing up with syncsrc=1 system.conf : span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,2,0,esf,b8zs bchan=26-48 mtp2=25 span=3,3,0,esf,b8zs bchan=49-72

Hi all I'm trying to configure a TE410P in Europe with three E1s and a T1 channel bank (already bought in the US) to receive and make calls through *. I managed to get the E1s to work, but I'm having trouble with the channel bank (a Rhino). I have tried the bank in spans 1 and 4 changing jumpers in the card (always with no PRI connected, as I have no PRI where I'm testing now,

TE410P card down. I have three (3) TE410P in one machine running asterisk with SS7. My problems started last week when one of my cards started switching to E1 every time after reboot. I set the following in dahdi.conf and that solve the problem. /etc/modprobe.d/ options wct4xxp t1e1override=0x00 Now all 4 ports on that card is down with Red Alarm. I tried rebooting the machine and

could be "hot". Is there any chance this would cause the card to fail after a while? It appears this site just had 4 port Digium card fail today. > Also, I am trying to cross connect with another Asterisk system with > > the normal LBO setting (i.e. span=1,1,0,esf,b8zs) but as of yet the > > systems aren't seeing each other at all. Could the side with the high >

We have a Te410P with 3 Telco T1's (D4 SF ) with DID's (non-PRI). ANI & DNIS is received in-band DTMF in a format such as *7145551212*8002* What happens when there are 30 or more calls, asterisk might see is DNIS = 802 or ANI = 4551212 for examples, where parts of the numbers are dropped. All the traffic arrives into a simple IVR script where a message is played. We are

Hello all, I'm using Wildcard TE410P card. Here is a zaptel.cfg loadzone=se defaultzone=se span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 # ztcfg -vvv Zaptel Configuration ====================== SPAN 1:

Is it possible to have a different verbose level full log than to console output? I'd like to keep console verbose at 1, but now full log is at 1 also. Bart -------------- next part -------------- A non-text attachment was scrubbed... Name: bhfisher.vcf Type: text/x-vcard Size: 253 bytes Desc: not available Url :

Hi to all, I have a problem with this wildcard and one E1 line. The server is a Asus P4P800S with the 865PE chipset, and 512MB RAM. The kernel version is 2.4.26. I have donwload and build the latest CVS version of zaptel, libpri and asterisk following the ufficial instructions of digium. I have set up my server in this way: zaptel.conf loadzone=it defaultzone=it

Does anyone have all the Telco intercept prompts (numbers and such) with voice inflections to simulate number referrals and disconnects I could download? TIA, Bart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080522/08b001ce/attachment.htm

I'm trying to figure out how to start *..... Rh7.3,CVS,TE410P,TA750 If I just try the way the docs spell it out "/usr/sbin/asterisk -vvvc" it fails...... /var/log/asterisk/messages Oct 3 22:23:34 WARNING[1024]: File chan_zap.c, Line 610 (zt_open): Unable to open '/dev/zap/channel': No such device Oct 3 22:23:34 ERROR[1024]: File chan_zap.c, Line 4930 (mkintf): Unable

Hello All, I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect T1 lines it goes in RED. When I do connect the same line on a different Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 Card for any hardware failures. I heard about loopback test , how helpful it is? Here are my configuration /etc/zaptel.conf span=1,1,0,esf,b8zs

> I'm going blind searching - maybe you know? > > During the execution of a script I want to play fake ring to caller. > Both of these examples complain of missing option: > > $agi->exec("Ringing"); > $agi->exec("Playtones ring"); > > Notice: Undefined variable: options in > /var/lib/asterisk/agi-bin/includes/phpagi.php on line 326

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

I have some old PC's I want to build as a test box - It's up and running OK now. Now I installed a TDM400P and there is nothing I can do to get the card to come up. My guess is the box is not PCI 2.2 compliant or does it need to be to see the card? Thanks, Bart Here's what I know: Processors 1 Model Pentium III (Katmai) CPU Speed 551.37 MHz Cache Size 512 KB System Bogomips

Hi everyone! Here is my configuration and messages taken from Asterisk startup. The E1 PRI trunk is connected to our national telecom company here in Croatia. When I call from outside over this trunk to my company I get 'error in connection' respnse. In the same moment I can't see anything in Asterisk, nothing that will tell me that the call reached Asterisk. I think there is a

Can anyone clue me in about these T400 T1 cards I see advertised? I hear they are Digium Clones. Is there some reason to avoid these? How do they compare to TE410P's for example. Bart

I'm trying to install a TE410P this is what happens with compiled zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ this is my zaptel.conf (checked with the provider the values): span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=it defaultzone=it then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : Sep 30 16:12:40 localhost kernel: Zapata

I need some help getting a system running for one of my company's plants. I am running AsteriskNow 1.7 with Asterisk 1.6.2.10 and FreePBX 2.8.0.2. My D-Channel keeps bouncing. The telecom tech told me he thought that I might be using the wrong sync source, and I think I might have been, but I changed DAHDI system.conf to "span=1,1,0,ESF,B8ZS" (from

I'm a bit confused on how to setup Zaptel.conf and Zapata.conf when there is a TDM400P and a TE410P installed after upgrade. The TDM400P has 2 FXS in position 1 & 2 and 1 FXO in the fourth position. I see boot, WCT4xxP loading first and WCFXS loading second. According to my understanding, given above, the TE410P should be configured first, then the TDM400P. However, I'm not sure