similar to: X100P pass through questions

I've spent a week playing with Asterisk 1.6 and I love it. What a brilliant piece of software! Progress and learning have been reasonably good. I have external SIP provider calls coming in and have put together a little call platform and I'm stunned at the flexibility. There is one issue for me. I took me a while to click that ZAPTEL now equals Dahdi, but now I'm there I have an

Hi. I have installed a x100p (THE x100p for those who have seen my former post). Now I just want to connect a "normal" phone (not an IP phone) to the card and use it as a sip extension (I have a FWD account)... more clearly: I want to be able to pick up the phone and call any FWD user using my FWD account... receive the FWD calls in that phone, and also to be able to make normal

PROBLEM: My x100p only does bad things. When I plug the line from the wall into the card, other phones in my house go nuts, no dialtone, crazy clicking, random tones, etc. Following the steps below, the line is screwed up any time I test after step 2. Just plugging the line from the wall into the x100p takes my other phones off line. External calls to my line hear busy. Obviously, can't

Hi.. I've got an asterisk setup with an X100P card installed.. I'm noticing that upon hangup, it takes a good 3 to 5 seconds before asterisk realizes the line has been hung up and drops the call.. this causes my SIP phone to continue ringing, and occassional phantom voice mail messages to be left.. I'm located in good old standard North America, with a regular Verizon residential

Hi, Has anyone got the X100P to work with an anlogue line in the Republic of Ireland? I have the X100P installed but zttool indicates a Red Alarm status on the card. It is on its own interrupt and I have tried different PCI slots but all to no avail. Are there any alternatives to the X100P that can work with asterisk and are likely to work in Ireland? Thanks, Aaron

I have Asterisk setup in a SOHO environment. I have 2 X100P cards at Zap/1 and Zap/2. I have 1 TDM400P card with Zap/3 - Zap/5. I have subscribed to callwaiting, callerid and calleridcallwaiting from Qwest on the 2 PSTN lines - Zap/1 and Zap/2. My problem is when I'm in an active call to the outside thru Zap/1 or Zap/2, I can't pickup the incoming callwaiting call. I can see the

Hi I've got a cheap card from x100p.com for my pots line. I haven't found a definate answer if it is possible to get danish(DTMF without signaling before it). I have had a look at bug #9 but that is written longtime ago. I am running zaptel 1.4.7 and asterisk 1.4.14 BRIstuffed 0.4.0-test4 both from the xorcom debian packages. I believe they should contain some kind functionality for DTMF

Does anyone know if there is a zapata.conf option to tell * to listen for a dialtone before dialing? I've got a couple of analog phones on a pstn line shared with a x100p * fx line. If someone is on the analog phone and another person initiates a call through * to use the same line, * dials over the top of the existing conversation. Is there a way to have * detect dialtone before dialing?

Is there any way to make the X100P to check for a dialtone before dialing? My roommate is tired of hearing random dialing in his ear when he's on the phone (same circuit as the X100P). I know one solution is to just put in a TDM400P for the house, but I'd rather get away w/o having to do that. Thanks, Jared

Hi, I suspected that I the analogue phone should have got a pass through signal when the power was off to the server, unfortunately it doesn't. I kept asking digium support about that but they didn't give me an answer. The problem is how do I identify whether the X100P is incompatibel with the network or faulty without possibly wasting another USD100??? Aaron On Sat, 2004-05-15, Eric

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

Hello, I have recently bought a X100P card. I installed asterisk succesfuly. When I plug my operator's line in the "line" jack of the card the result is that my line is not working any more. When I put it back to the phone, everything OK. It seems that the card leaves the line open! The same happens when I plug a telephone device in the "phone" jack. Furthermore, the

I've configured an analog/single line off my mitel sx-2000 to a x100p card in my *, however when the remote caller drops the line I get a dialtone back from my pbx and the x100p doesn't detect the end of the call. Any way I can tell * to drop? I've tried call progress but it doesn't seem to work...

Ahhh this could be my problem! I just checked which wires on the RJ11 cable had a voltage across them and it was the yellow and green (3 & 4?). From what someone posted the other day it's supposed to be Bumble Bee and Christmas Tree. I did have to get a technician out to fix my line when it was first installed because it was dead. Maybe he wired it up incorrectly or maybe they just do it

I have just started developing asterisk, and am trying to start simple. I have a X100P device and an S100U device. I am trying to use the examples provided, where I add a few lines to the /etc/zaptel.conf, /etc/asterisk/zapata.conf, and /etc/asterisk/extensions.conf so that I may connect an analog line to the X100P and an analog phone to the S100U. When I dial the analog line, it should ring

Hi A quicky - has anyone had success with an X100P in the UK ? I'm seeing some oddness - when I plug the wall socket into the card, I lose dialtone. If I unplug it, it comes back. Does this sound familiar to anyone ? Cheers Nigel Nigel Taylor Technology Director ITAzure Limited Dunn House Warren Park Way Enderby Leicestershire LE19 4SA 0116 286 3016

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card

Systems: Definity G3rV6 Suse 9.1 with two X100P cards. I'm having trouble getting Asterisk to interface with my Definity. I can call out fine (Asterisk to Definity), but if I call either X100P (DID from Definity), strange things happen. I figure I should probably get dialtone, punch in an Asterisk station number and get it to ring. Asterisk picks up fine, but I can't figure out what to

Problem: Flash on X100P does not flash. Phone line has Call Transfer. With this line plugged into a regular phone, it can receive a phone call. Then, depress the hook momentarily, release. Dialtone is now available. Dial a different number. Call is answered. Hook Flash again, now in a three way call. Hang up. The other two parties are still in communication. Now, plug same line into the X100P.

Hi I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line) This card is setup as fxs_ks I was getting dial tone but suddenly no Dial Tone....Help appreciated.... When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error: ------------------------------------- linux*CLI> -- Executing