similar to: surge protector?

Hi - I've got a new install with a Sangoma A200 and a few GXP2000's. When users are talking over the Sangoma, they get a lot of sidetone (local echo). Internal calls are fine. Where do I adjust that? I assume its in zapata.conf somewhere? thanks Todd

Hello everyone! I'm planning on setting up a new system shortly and can't pick the right card... We will have 2 or 3 lines coming in and 7 extensions (GXP2k's). Should I just get 2 or 3 X100P cards? Or do I need the Sangoma A20200 or even the A20200D (Echo cancelation)... I was thinking I'd use a Dell 2.0 GHz machine as the server... If anyone has suggestions as to

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently

I've got my asterisk server in the DMZ of my local LAN - I've used my Budgetone and GXP2000's from the Internet- on direct IP connections with no problems. However, I'm about to deploy about 5 phones (either budgetone or GXP2000's) all on a LAN behind a NAT- on a different network than the Asterisk server. Should I look into using STUN servers? Will this setup be a

Hi everyone - I have a nicely working system to which I'd like to add popups for incoming calls. Calls go into a queue, then all extensions ring. I'd like the agent that answers to call to get the popup on screen. I'm currently using Flash Operator Panel to get a popup (other suggestions welcome). Currently, all users get a popup when the call first goes into the queue

I need another Sipura 3K and the replacement I think is Linksys SPA3102. Any input on how reliable is it? -- #Joseph GPG KeyID: ED0E1FB7

On 9/10/2017 6:41 PM, Sam Varshavchik wrote: > Dutchman01 writes: > >> Hello all, >> >> ? >> >> I request a new NUT release as current dates back to March 9, 2016: NUT 2.7.4 >> >> The fact stays that not all distro?s use latest snapshots/commits from github >> dev tree. >> >> ? >> >> So please do release a new up to

I am sorry if this is an FAQ, but there doesn't seem to be searchable archives, and the supported manufacturer's list doesn't include "surge master". Google was also not much help. I have just put a Linux box and the customer has a "surge max " UPS. Anyone any ideas what protocol it uses? There is a Green serial cable. The manufacturers web site is here:

I'd like to protect my expensive Digium FXO cards from spikes on my three incoming PSTN lines. Does anyone have any recommendations? -- Eric Cooper e c c @ c m u . e d u

What's wrong with the Asterisk CLI history? When I exit the CLI, and re-enter, the last command in the history always defaults to 'stop now'. This is very bad, and it's caused accidental shutdowns more than once. Connected to Asterisk 1.2.9.1 currently running on hera (pid = 17399) Verbosity is at least 3 hera*CLI> A No such command 'A' (type 'help' for help)

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Folks, My manager's asked me about something that can run on our CentOS boxes that can connect to an (bleah!) Exchange server's calendar. It doesn't look like Lightening can, and from some googling, it appears that Evolution claims to, but.... It's got to be able to set dates, etc. Can Evolution? Any other suggestions? mark

Hey all, I have a triplite 1050 and when I did a test today I saw that the battery bounce from 100 to 80 to 90 to 91 percent before UPSD lost its connection to the UPS. The server then decided that it was time to shut off. The UPS sat at 91% for about 5 min before UPSD lost its connection, so I'm not sure if it wasn't updating its battery.charge... I wasn't sure if this is

On 9/22/20 2:14 PM, Gregory Sloop via samba wrote > As an old sage (curmudgeon if you like) I'd encourage people to really consider if the Pi is really what you want. > For me, it's not - even though it's a totally cool device conceptually. They're a ton of fun to tinker with too. I am also an old guy and didn't want to use the Rpi for this purpose. However, many years

What, the deadline is tomorrow?!? The deadline for proposals snuck up on me, and I'm sure many of you forgot as well. Therefore, I am extending the deadline. I have received some great talk proposals, so keep them coming. However, I have very few tutorials, BoFs, posters, or lightening talk proposals. So please, get those proposals in and lets make this year the best developer meeting yet!

I have having problems trying to take a file recorded with Monitor and convert it to MP3. When I use 'play' to play the .wav file, it sounds fine. After bladenc'ing it, it plays at lightening speed, and the voices are all high pitch. I tried using sox to resample to 32000 before encoding, but that didnt work either. Do any of you convert your .wav files to mp3? Monitor call:

I''m having severe speed issues on our server (localhost is lightening fast!). Here''s the call: <img src= <%= @pics[col].img_url %> height=80 width=60 onMouseover="<%= remote_function(:update => "diag_box", :url => { :action => :preview, :tit => @pics[col].mname, :desc => @pics[col].description })%>;"> It''s an

I'm running CentOS 5.9 x86_64 on a machine I built myself that has 6 SATA II hard drives (4 - 1 TB drives; 2 - 1.5 TB drives) all in several RAID-1 arrays. These arrays were created when I did the original installation with CentOS 5.1 and each created partition (both standard and LVM) were built raid 1. Due to some things happening around the house that required most of my attention, I

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

Client - Not for Profit in the Middle of the Jungle/Rain Forrest Infrastructure - Datacenter is Non Climate Controlled, Prone to Flooding, and has Sketchy Power, LAN - NEW Cabling in main Office building, Hodge Podge of DYI wiring across remaining buildings. Phones - Total of about 50 extensions. Only about 25 - 30 phones will be IP phones, 20-30 more will have to be analog due to the distance.