similar to: garbled calls

I've been having random problems when I make long distance calls using either VoicePulse or Nufone. Sometimes the calls go through clear, and other calls (or even just part of a call) the person on the other end just hears garbled voice, or really broken up voice. Sometimes it lasts for only a few seconds, but other times it goes on for a few minutes until I give up on the call. At

All, The users in our organization are well, quite frankly, sick of phone service that is being provided. The choppy phone calls, and drop outs are detrimental to our sales force. I've tried about everything I can think of. Moved the asterisk server from VM machine to dedicated machine More than enough bandwidth Setting 802.1p = 7 Set Dedicated voice traffic 35% of bandwidth. Not sure

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of J. Oquendo > Sent: Thursday, April 26, 2007 6:47 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Asterisk brute force watcher (was FYI) > > Steve Totaro wrote: > > I suspect that

Dear list, following problem, i have some users, who are supressing their callerid. This setting is adjusted at the sip phone. So if these guys are calling internal persons nobody sees the callerid. I am looking for the following resolution: User has set his phone to anonymous, user calls somebody internal, Asterisk initials a lookup on the channel and generates a new callerid for the

> In my case, I have good incoming quality and terrible quality going out. > That is, I can hear people perfectly well but they complain that my > voice drops out and is garbled regardless of who places the call. This suggests to me that you may have congestion problems in your "upstream" traffic flow. Setting QoS on the packets may not help, if whatever router you are using

For some reason a couple weeks ago users began experiencing garbled audio in one direction when dialing out via our VoIP provider. This happened at multiple sites simultaneously. The VoIP provider doesn't think it's their problem. If I switch to another codec so that Asterisk transcodes everything is fine. On conference calls (where Asterisk gets in the middle to relay ulaw to all

Any ideas on how asterisk could accept an email (such as an email to SMS or "number at mybox.org" sort of thing) and make a phone call to a specific number and make an announcement? I imagine the first part is the big question. joe a.

My Polycom phones are displaying time, off by one hour. Seems they are on the old DST rules. How do I fix this? joe a.

Victor Hoodicoff wrote: > > > I think your impressions of Aastra are outdated. Install the latest > firmware, download the latest documentation and test and THEN give an > opinion! Did you miss the part when I wrote I have Asstras sitting on my desk collecting dust. I program on average about 5 per month, deal with about 40+ per day. They're as impressive as that Hyundai in

I have an existing Hylafax system using a mainpine 4 port board, 4 POTS lines. Have a recently installed Asterisk system, with a dedicated T1 line. (Well, it's really a fonality system). What would I need to do, or where is the reading material, for what I need to do, to convert the Hylafax server to use the T1 line? Reliably. Preferably to use DID's as well. The current FAX works

Having had various issues with local vendor (begins with "V"). am looking to move to all wireless. Anyone know if current vendor can refuse to port the current land line numbers to a wireless provider? >From what I've read, the Fed's seem to say "no", they cannot refuse, or impede this. joe a.

Anyone running caller id spoofing applications in the USA running asterisk? Then it's time to move them to Canada or similar. http://arstechnica.com/news.ars/post/20070627-caller-id-spoofing-about-t o-be-outlawed.html Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial).

In a system connected to a verizon T1, Digium TE411P (quad T1 echo cancellation), client is complaining it is "too quiet". The complaint regards calls over the T1, not in house SIP only calls. Their description indicates they want some earpiece feedback of themselves speaking. Also, they complain that it takes several seconds (3-4) for the other party to respond. That is kind of

Hi. I'm having a terrible time with call quality coming into my * box. I'm using VoicePulse over a 1.5/1.5 mbit line. Outbound calls are crystal clear on both the RX/TX sides of the conversation. Inbound calls, though, are HORRIBLY garbled on the RX side. I can barely hear the caller, but they report my quality is fine. Getting loads of garbled sounds and weird echoes. (Could just be

What are peoples experience with the reliability of the TDM400p. Specifically in the 2 FXO, 2 FXS configuration, which is the 022 (?) model. Is this board prone to random failures? joe a.

I am having a problem detecting incoming FAX. TMD22p (tdm400p 2 fxo, 2fxs) As I understand it, I must have faxdetect = incoming to enable detection of the fax tone. Then, I must have a [fax] context to pickup the line and send it to whatever extension the FAX device is on. In my case, I ask it to answer immediately and do a distinctive ring (r3) to alert that is its a FAX call so no one picks

So I have whose autoattendant is colliding with their extensions... Quick fix anyone? Second someone presses say a person's extension (101) ... Autoattendant sends them to the first context... [companyx-main-aa] exten => s,1,Background(companyx/companyx-main) exten => s,2,Background(silence/10) exten => s,3,Background(companyx/companyx-main) exten => s,4,Background(silence/10)

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

I have an odd issue, where a polycom 601 stops ringing, or more properly, maybe, stops *being* rung, when a call comes in. Other phones/extensions, continue to work fine, they being run at the same time. My dial plan works fine (?) seems it will ring properly, right after a reboot. It works fine for outgoing calls at all times. Hints? joe a.