similar to: Polycom sip.cfg / voIpProt.SIP.requestValidation.x.request.y.event

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

Hello, I got 3 Polycom 300 phones, and upgraded to the latest firmware provided by the reseller. This is my first experience with Polycom and I cannot make them register in my Asterisk Box. I followed every advice I found (including separating [user] and [peer] in sip.conf. Using ethereal, I found that it tries to SUBSCRIBE to the asterisk box and it receives a 403 FORBIDDEN message. I

Hello list, I was wondering if any of you guys have had any luck with polycom in remote offices, I'm facing a weird issue, polycom phones work fine in the main office, in remote office it says, Registration from '<sip:202@10.0.1.190>' failed for '70.59.21.112' - Wrong password the odd thing is Linksys phone works without any issue!! polycom wont register but its able to

nat is equal to yes, and server definition in ftp provisioning server is correct. i followed packets between phone and asterisk, it seems for some reason asterisk is not happy about challenge response its getting from polycom. why its not happening in the same LAN, beats me! and also NAT device is cisco SIP aware and works flawlessly with Linksys. the only close definition of issue i have found is

Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer

Hi, I just moved many Polycom phones from firmware v3 to 4.0.1b. Anto-Answer simply stopped functioning. I can downgrade and make it work, upgrading kills it again. There obviously is a difference in how the newer firmware is treating this auto answer sip header. Can anybody tell me if they have Polycom firmware 4.x.x working with auto-answer/paging? Just so I know it's worth my time

Hi, I've been meaning to fix my non-working paging feature here for a while, and I've just spent the last 5 hours looking at many, many web pages that all say the same thing. I am using Asterisk 1.6.2.18 and Polycom phones, both older (501 with "latest" legacy 3.1.7 firmware) and newer (335 and 650 with latest 3.3.1f). I have changed the correct values in sip.cfg like

Hi, One of my users is in trouble with his polycom phone hooked to an asterisk server. The phone works fine for a few days, and then disappears from the registered sip peers in asterisk. The user is able to place outbound phone calls, but can't receive incoming calls until the network plug is unplugged/plugged. Working line XXYYZZAA24/XXYYZZAA24 10.50.5.186 D A 5060

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

I was hoping that someone may be able to shed some light on some issues I'm having on trying to get an Asterisk test server up and running. At the moment I have the basics, two Polycom hard phones (301 & 601 with expansion unit (which oddly will not power up)) that can call each other, log into voicemail (one touch) and have custom directories & buddy lists. Unfortunately some of the

Hi, I'm looking to disable rejecting calls from my call center employees. They are using Polycom phones. Is there a way to either disable the reject/DND features on the Polycom phones (don`t think so) or have the Asterisk PBX ignore "Got SIP response 486 "Busy Here" back from 12.23.34.45" response from specific phones/SIP registrations and just keep on ringing?

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network. I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from

Hi, I have a polycom reboot script which sends a NOTIFY with check-sync. It worked fine with 1.3.4. After I upgrade to 1.4.1, it stopped working. Anyone has the same problem? Thanks, Richard

Hi, I'm having trouble setting the ringtone on my Polycom 501. The relevant entry in extensions.conf is: exten => 801,hint,SIP/creative1 exten => 801,1,SetVar(ALERT_INFO="Test") exten => 801,2,Dial(SIP/creative1,20,Ttr) In the sip.cfg: <alertInfo voIpProt.SIP.alertInfo.1.value="Test" voIpProt.SIP.alertInfo.1.class="13"/> and <TEST