Displaying 20 results from an estimated 1000 matches similar to: "Multiple TDM400p cards in one machine -- nolonger an issue?"
2007 May 28
2
Multiple TDM400p cards in one machine -- no longer an issue?
Hi all,
Years ago, I was pretty sure attempting to use two TDM400p cards in one
machine was recommended against by Digium ... probably because the cards
couldn't hack it, and/or interrupt problems etc
I have seen some posts recently that seem to indicate it is in fact possible
these days thanks to some updated firmware perhaps? ..... I just need to
have two in the server because the 4 ports
2007 Aug 07
2
How to stack Sangoma Remora cards
Hi,
How can can you stack sangoma cards such as
http://www.sangoma.com/datasheets/p_a200-specs in a given PC enclosure ?
It seems to me that it introduces mechanical constraints that seem difficult
to comply with as space between cards is set by Remora expansion card.
Your advice ?
Cheers
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Mar 04
1
Question on phone line "pass through"
Hi all,
I have a TDM2400 full of FXS cards and a TDM800 full of FXO cards.
If I have a fax machine on the FXS port dialing out through asterisk
on the TDM800 FXO, should I be expecting any problems?
Or should this just work as expected? (ie, flawlessly with the
asterisk box essentially transparent to the whole operation).
I am doing it this way to allow many faxes and modems to share a dial
2006 Jun 09
1
shutting down a mysql server renders cdr_mysqldead and asterisk nolonger makes or receives calls
Not res_config_mysql cdr_addon_mysql. All it does is log call detail
records. According to bug http://bugs.digium.com/view.php?id=4749
cdr_addon_mysql should not behave in this way. Therefore 1. there is no
realtime DB besides ASTDB storage of SIP phones, and 2. CDR is not a
life-or-death situation for asterisk, if it stops asterisk should
continue and replicate later (the year-old bug cited
2009 May 29
1
Problem making a package using S4 objects.
Hello.
I've developed an algorithm in R which I need to package.
The implementation uses S4 objects and it's divided in 5 files.
Everything is working fine when I load the files into the R console but when
I try to make a package I get an error that I don't quite understand.
Here's what I do:
*1.* in R console, I do and get:
> package.skeleton(name='remora')
Creating
2012 Nov 09
1
iptables: recent nolonger supported in Centos 5.8?!
Helo,
we use recent to control ip traffic.
kernel 2.6.18-308.13.1.el5 : all is OK
kernel 2.6.18-308.16.1.el5 : the first recent statement causes an error.
E.g.:
iptables -A INPUT -m state --state NEW -m recent --set -p tcp --dport 80
iptables: Unknown error 18446744073709551615
The man pages say: recent is supported.
CentOS 6: is OK
Knows anyone more?
Best regards
Helmut Drodofsky
--
Viele
2007 Aug 04
0
zttool says tdm800 is OK, but it won't recieve calls.
I have a TDM800 that is installed and working. (TDM800 + 2 X QUAD FXO).
Zttool says it is configured, ok, and there are no issues.
Ztcfg -vvv shows that all the channels are configured.
Zap show channels in the CLI show all 8 channels configured as they are
supposed to be.
When I plug in a pots line from the telco and make a call to that line,
asterisk does not respond. (No Starting
2006 Jun 09
2
shutting down a mysql server renders cdr_mysql dead and asterisk nolonger makes or receives calls
At approximately 3:15pm I shut down the office MySQL server to change
out some hardware. Shortly after I received a call from one of two
customers whose asterisk servers output CDR data to that server. They
could not place or receive calls. Shortly after that I received a call
from the other customer. I'm below providing output from the message
log (At debug level). I don't see much
2007 Apr 02
1
Yeastar Cards
I am in the process of buying a TDM800 card from Yeastar (
http://www.yeastar.com/products.asp?TypeName=TDM800%20PCI%20Card&cTypeName=1 )
Any one has tested this cards? How reliable are them? I am specially interested
in the FXO/FXS module.
--
Gustavo Felisberto
(HumpBack)
Web: http://dev.gentoo.org/~humpback
Blog: http://blog.felisberto.net/
------------
It's most certainly GNU/Linux,
2007 Apr 09
3
Upgrade 4 to 8 Analog Lines Question
Hello
I have an office with a T1 that provides 4 (out of 8) analog PSTN
lines thru an adtran board. I want to add 4 more analog lines.
Currently I have a Digium TDM40B. I'm wondering what the best
upgrade path is, where I define 'best' as the solution that
is most likely to work without problems (like interupt conflicts)
and work with my current echo tuning .
I see my purchase
2007 Nov 02
1
AEX800 (TDM800 Express) - not detected
I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express.
(or AEX844 - 4FXS & 4FXO)
I downloaded Asterisk Now - and have got this loaded on a new
motherboard (Intel with 3 PCI, 3 PCI Express - etc).
(Downside on PCI-Express is the physical support the express slot gives
(very little) compared with an 'old' standard PCI slot!!!)
With only this card in the box....
2011 Apr 18
1
A101DE Sangoma Card in AsteriskNow 1.7.1
Hi,
I have A101DE Sangoma Card(
http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html
)
lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp.
A200/Remora FXO/FXS Analog AFT card
[root at asterisk ~]# lspci -vvv -s 03:04.0
03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS
Analog AFT card
Subsystem: Unknown device
2007 Aug 26
1
TDM400 and TDM800 fxo stop answering
Hi, I have two asterisk with the Digium TDM400 installed on the first and
the TDM800 installed on the second. Both systems are linux Debian 4.0 whith
kernel 2.6.18 and asterisk 1.2.24.
Often the cards stop answering calls, and I can't make or receive calls; I
need to reboot the system or manually reload the zaptel modules to restore
it.
I've tried zaptel versions 1.2.18, 1.2.19 and 1.2.20
2007 Aug 28
1
HDL F10 brazilian doorbell device + TDM2400
Hi,
I'm trying to connect an HDL F10 device for a friend living in Brazil to
the TDM2400 on his Asterisk server.
That device should behave like a normal doorbell and it is if connected
to an analog PBX.
I connected to the TDM2400 and everything works fine except for one
thing: when the called party hangs up his phone, the F10 HDL device does
not hang up.
I'm not brazilian and not
2007 Apr 19
1
Problem with TDM2400 and Polycom 501... Voice Quality Lost...
Hi List...
I have an asterisk box with one TDM2400, it has 8 FXS's and 12 FXO's,
and it also has the echo canceller...
I'm running Asterisk 1.2.13 and Zaptel 1.2.12 with the Kernel
2.6.9-34.0.2.EL
I'm using Polycom's 501 with the SIP 1.6.2.0041
The problem is when someone dials to or from the PSTN through the
TDM2400, the voice quality is crappy...Instead of hearing:
2010 May 24
4
convert zaptel to dahdi?
I am trying to get a zaptel install converted to dahdi.
I can get dahdi installed, and the pseudo device even shows up; however, dahdi show channels shows me nothing. There is a TE122 and a TDM800 in there, and neither show up.
dahdi show status shows both cards, and dahdi tools show that the cards are there, working, and have no alarms.
What am I missing?
Michael Munger, dCAP, MCPS, MCNPS,
2004 Jul 27
3
Pickup an unanswered line
Apologies if this messages appears more than once, somehow sending it via gmane's nntp-server doesn't work as expected.
Been trying to send this message for 2 days now, without success so far...
---
Hello,
I'm exploring the capablities of Asterisk and must say I'm really impressed!
However, I don't need most of the options, but can't figure out the things
that appear
2009 Oct 21
1
error - sources for the 2.6.18-92.1.22.el5xen kernel
while compiling zaptel drivers for my yeaster TDM800 hardware, I get this error;
make[3]: Leaving directory `/usr/src/zaptel-1.4.12/menuselect/mxml'
gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o mxml/libmxml.a mxml/libmxml.a -lncurses
make[2]: Leaving directory `/usr/src/zaptel-1.4.12/menuselect'
make[1]: Leaving directory `/usr/src/zaptel-1.4.12/menuselect'
make[1]:
2006 Mar 27
3
Dell 2850 w/TDM2400?
Does anyone know if a TDM2400 will fit into a Dell 2850?
Kerry Garrison
Director of Technical Services
Tech Data Pros - Orange County's Mobile IT Service Provider
(949) 502-7819 x200 - <mailto:kerryg@techdatapros.com>
kerryg@techdatapros.com
<http://www.techdatapros.com/> http://www.techdatapros.com
-------------- next part --------------
An HTML attachment was scrubbed...
2006 Nov 03
2
Is fax bridging with TDM2400 working (or about to work) ?
Hi,
>From a chat with Kevin Fleming during last Astricon Europe in Paris, I
understood that Digium was about to support TDM bridging with TDM2400 board.
This feature had to be introduced with 1.4 release.
Is my understanding correct ?
If correct, would it be reliable enough to bridge 14400b/s fax calls though
I know, fax were not officially supported or shall I use Sangoma boards for
that ?