similar to: a/b door phone

Hello, Before throwing in the towel with my Sipura 3000 has anyone had much success with that adapter connected to a door phone? In our setup a doorphone is connected to the SPA's fxs port. When a visitor rings, asterisk calls a group of Polycoms and the person who answers has to enter *1 to trigger the door opening. However it seems the SPA doesn't relay the DTMF's to the

Hi, Can anyone recommend a cheap SIP doorphone? Please only respond if you've had personal experience of a doorphone. Many thanks Dan Journo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091014/f85cfdb5/attachment.htm

OK here is a possible tricky one. I have a rocom door entry system which connects to an FXS port on my TDM400P card. When the door button is pressed it initiates an 's' extension which dials a number of SIP extensions. When a SIP phone is picked up the user can speak to the person at the door and press the 7 digit which sends at DTMF tone to the rocom unit opening the door. All this

Hello, I have a customer who has their front door integrated to their current phone system. If someone presses the buzzer, the secretaries phone will ring, and she can talk to the person at the door. By pressing ** she can release the door. Anyone have any sort of integration like this. Are there IP devices anyone is using? They have a pizza box server as their asterisk server with

Hi, Anyone know anything about Asterisk's support for door phones? Receiving the call from the door intercom system, opening the door, etc? Any hardware recommendations? I understand that the equipment we have now is Panasonic proprietary and came with the currently deployed Panasonic TD12-32 pbx. We intend to deploy Asterisk in a 72 extensions + 16 trunks in a while, so any info will be

Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout

Hi, I'd like to use Asterisk with ISDN interface and normal analog interface to door phone (or any other low cost connection type to door phone). What would be your recomendations for needed HW in Europe? Is it possible to have this in one PCI card? Are there any lower cost voip door phones? Thanks in advance, Robert.

Hi! I am new to asterisk and I'd like to know wheter the following scenario is possible: Someone press the Button on the door station. The door station dials lets say the extension 333. I take the call on 333 and talk with the person on the door. Now I'd like to activate the door opener by pressing some numbers on the analog telefon. Asterisk should now recognize that I pressed

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

Hi, could anybody suggest a usable doorphone and magnetic door opener "hardphone" system for me, please? Of course should be connectable to asterisk. I am in the EU, should be available here. thank you, Csaba

Hi, Is there an affordable HW solution to do a door phone on *? I do not mind using the solder iron to modify an existing door box. Thank you! Best regards HB Norway

Hi there, I'm new to this list, so sorry if this has already been asked before [hopefully this is the correct list too!]. I'm in the process of building my asterisk system. I've set up a CentOS machine, together with Cisco 7912 phone over SIP. I can make and receive calls from outside over my TDM400 card [2 FXO ports], everything works fine. My next project is to integrate or rebuild

Hello all, i read a few articles online about the possibility to setup a "buzzer" door system to PBX using asterisk! currently my setup contains asterisk of course, and a sipura 3102.. what do i need to get such a feature done?! or should i ask if its possible?! _________________________________________________________________ Connect to the next generation of MSN Messenger?

I've done a bit of searching and haven't found any good reference for this, so I figured I would ask the group next. Being new to Asterisk, we've been sucessful in figuring out most configuration items, however we're stuck on one thing... Using recent Asterisk stable, we have a situation where I have an analog door phone which, when the button is pushed, simply off hooks the line

Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door. So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk

Thers a box we can get here in Australia that has an RJ45 plug, a built in web server that has a config page and URL's to close/open one of 4 included relays. I use phpagi to hit the url and open/close doors that way. If anyone is interested, ill let you know URL's but its being sold from our local Jaycar agent. Regards Kevin -----Original Message----- From:

I have a customer that has a campground. Wants to see who's at the gate, remotely, via camera, and talk to that person through a "traditional squawk box" and be able to open the gate remotely from that phone. He doesn't want to have a separate camera feed, etc, he wants to do it all on one phone. Does such a way to do this exist by using Asterisk and some kind of relay

Hi all I have a door entry system that connects to an FXS Card. When the button is pressed it dials an extension which is actually a group of all other SIP extension. Is there anyway you can specify that the phones ring a different ring type when a call is received by that FXS card extension ? This is so I can determin the difference between a call and a door entry ring. I saw that a snom

Since moving from FC2 to CentOS 4.x I've been having a strange problem opening the CD/DVD drive door after burning backups. A cron job tars and gzips directories I want to back up and stores the .tar.gz file in my /misc directory. I then burn the file onto a blank CD. All goes well with the burn...the drive door opens upon completion. The problem occurs when I re-insert the CD to test

I've done all the googling I can on this, and have come to the conclusion that a Grandstream BT101 can be abused to be a door phone. Could someone with access to one, confirm that the following is possible? Researched: 1. When set to auto-answer, dialing the phone will result in a short beep and instant speaker-phone connection. 2. When pressing the "message" button while