Displaying 20 results from an estimated 200 matches similar to: "TE212P octastic initialization failure"
2008 Apr 14
8
zaptel 1.4.10 regression with TE220B on Proliant DL380 G5 ?
Hi list,
After a lot of testing + troubleshooting, I guess I'm observing
what I am now calling a regression with zaptel 1.4.10 (is it?)
As such I call for peer feedback, before either asking Digium
install support or filing a bug.
Thanks in advance!
System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card
OS: Centos 5
Kernel: 2.6.18-53.1.14.el5 (also tested under
2009 Oct 20
2
Kernel panic w/ DAHDI 2.x/Digium TE220B
I've seen this consistently on three systems, with three different
cards, and multiple versions of DAHDI. At first I thought the issue
only occurred on newer, Nehalem-based, systems, but I reproduced it on
a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi-
linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The
card is a Digium TE220B which uses the
2010 Jul 12
0
DTFM Detection issues
Hi list,
I'm having trouble with DTFM tones detection. Usually, some tones are
being received duplicated in Asterisk, some not. As you can imagine,
that's a very big problem involving IVR menu options, Meetme conferences
protected with passwords, and so on.
We are currently using DAHDi 2.2.0.2, module wct4xxp, which is managing
a Digium TE220B card, with a hardware echo canceller
2010 Jun 17
1
DTMF detection issues
Hi list,
I'm having trouble with DTFM tones detection. Usually, some tones are
being received duplicated in Asterisk, some not. As you can imagine,
that's a very big problem involving IVR menu options, Meetme conferences
protected with passwords, and so on.
We are currently using DAHDi 2.2.0.2, module wct4xxp, which is managing
a Digium TE220B card, with a hardware echo canceller
2005 Sep 07
1
ztcfg Kills My Dial Tone
I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS).
These connect to a Digium TE210P card. I'm running kernel 2.6.10
and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today.
The results are the same for all versions:
Right after I reboot, and modprobe wct4xxp, my analog phone connected
to port 13 of the first channel bank (first FXS port) gets a dial
2010 Sep 30
1
channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI
Hello everyone.
I have server with 2E1 PCI card, asterisk 1.4.35, dahdi 2.4.0, libpri
1.4.12-beta2. One PRI trunk looks to PSTN and take a clocksource from
telco. Another trunk looks to PBX with DECT system.
Some outgoing calls from asterisk to PSTN drops. The last message that
exists before hanging up process is:
DEBUG[28467] channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI/...
This
2009 Sep 01
7
Dahdi configuraion / error
Hello
I just updated the kernel, dahdi-linux and dahdi-tools
Im also using now asterisk 1.4.26.1
And im still with a red light (not RED/YELLOW anymore):
[root at catumbela ~]# /etc/rc.d/init.d/dahdi status
### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED
1 PRI CAS RED
2 PRI CAS RED
3 PRI CAS RED
4 PRI
2006 Dec 18
2
Digium TE405P with French E1 => Red Alert
Hi
anyone have a idea for debug my digium TE405P card ?
My zaptel.conf:
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone = fr
defaultzone = fr
My Zapata.conf:
[channels]
language=fr
context=from-E1
switchtype = euroisdn
pridialplan = unknown
signalling = pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
2007 Feb 27
2
TE212P on FC6 - stack overflow?
Hi all
did anyone of you experience an error like "do_irq: stack
overflow" in configuring a TE212P on Fedora core 6? The server
immediately hangs, I don't know if this can be related to hardware
configuration or kernel incompatibility... This problem arises when I
try to configure the channels with the usual command "ztcfg" and it is
strictly related to the presence of the
2010 Mar 02
6
Echo cancellation on DAHDI
Dear All,
How can we know the On board supports echo cancellation
I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
02)*board
all working fine but sometimes i got echo when user are calling a PRI.
is there any way to know on board echo cancellation .
regards
Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Aug 12
1
TE405P V2 changes?
Hi
I got the 2nd Gen firmware upgraded on the TE405P. I recompiled after
putting in the upgraded board but did not change any conf, but the spans
become active but will not come up.
I guess I am missing something or are the any changes to the
zaptel/libpri software that is required. I cannot find any info about
this or does this new firmware only work with latest CVS. I am using
1.0.9 with
2007 Feb 28
7
Problem with TE212P
Hello.
I have a TE212 configured in E1 mode.
This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured):
cat /proc/zaptel/2
Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN
25 TE2/0/1/1 Clear
26 TE2/0/1/2 Clear
27 TE2/0/1/3 Clear
28 TE2/0/1/4 Clear
29 TE2/0/1/5 Clear
30 TE2/0/1/6 Clear
2010 Jul 06
0
Problem with wct4xxp - cannot make calls
Hi,
I'm having problems with a TE420P card, in which I cannot make calls
using spans 2 through 4.
After a couple of days of working correctly, spans 2, 3 and 4 start
failing (can not make calls). The system is configured to work with SS7.
After the ACM message goes out, immediately a REL message is returned.
I searched for error messages in /var/log/messages and could not find a
clue
2008 Jul 16
5
Digium PRI and Echo cancellation
Hello,
I would like to double check what Echo Cancellation my Digium Card uses.
I thought I bought the little more expensive card that integrates
EchoCancellation. How can I check?
root at sn1:~# zaptel_hardware
pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121
root at sn1:~# ztcfg -v
Zaptel Version: SVN-branch-1.4-r4309
Echo Canceller: MG2
Is MG2 the correct one that I am supposed
2009 Jan 26
3
Digium TE220 card partially detected
Hello folks.
I've got a strange issue.
When I modprobe TE220 I do not see mesages like Launching card: 0 <..>
Setting up global serial parameters.
You can see how I loaded and unloaded the card for several times -
http://asteriskpbx.ru/pastebin/11
lspci can detect the card: 03:08.0 Communication controller: Digium, Inc.
Device 0220 (rev 02)
dahdi_hardware also:
astpbx ~ # dahdi_hardware
2010 Jul 19
1
digium HW echocancellation - fax tone detection
Hello !
I 'm using a TE405P with a HW echocanceller module attached on it.
dahdi version is dahdi-linux-complete-2.2.0.2+2.2.0.
As far as I know, the fax tone detection is done on the FW board.
How can I verify that the echo canceller has been turned off ?
When I do a cat /proc/dahdi/1 for span 1 I see still the VPM450 entry
near the channel although this was a fax call with CED tone.
2011 Mar 30
5
chan_dahdi unknown dependency problem
So, I've compiled and installed libpri-1.4.11.5,
dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi is
not getting built. If I do a "make menuselect" in asterisk I see it listed
with XXX, meaning that dependencies are not met.
XXX chan_dahdi
Depends on: res_smdi(M), dahdi(E), tonezone(E), pri(E), ss7(E), openr2(E)
res_smdi gets built fine, dahdi is
2010 Nov 07
2
"scratchy" sound on TE410P
asterisk 1.4.35
dahdi 2.3.0.1+2.3.0
one span on a 4port T1 card
Got complaints this morning that outbound and inbound calls were
"scratchy" and I made a few test calls. It kind of sounds like the gain
is too high somewhere, and the audio is overdriven. Is this a problem at
the carrier? I'm trying to call them now, but it's Sunday morning in the
sticks, and my chances of
2009 Aug 26
1
TE4XXP: Version Synchronization Error!
Hello to all
I'm using asterisk 1.4 and dahdi.
I had everything working fine, and I could place calls through my R2
channel.
But now the channel is always "RED" and Im getting this error message:
TE4XXP: Version Synchronization Error!
Here is my chan_dahdi.conf------------------------------
[channels]
language=en
context=incomingr2
signalling=mfcr2
mfcr2_variant=ar
2007 Apr 27
0
Problems with Digium TE110P
Hi everyone
I have a Digium card TE110P and after plug it, turn on the computer and
configure, the LEDs don't light up in spite of what Digium FAQ says about the
LEDs:
When will the LED's light up on my TDM400P/TE110P/TE2XXP/TE4XXP?
... The TE110P LED's will light up RED when the span is configured and kernel
module is loaded. If configured correctly and a circuit or channel bank is