similar to: The downside of Asterisk and least cost routing...

I am trying to move from IAX2 to SIP for voipbuster, moving at the same time to sip1.voipbuster.com. When I try calling out, I see that there is SIP exchange, and in many cases also RTP data being exchanged. Hover in a very large number of attempts the connection is not established. Half of the time there is no RTP, the rest of the time there *is* RTP data flowing in two ways, but no ringtone is

Hi all, I am probably missing something ultimately obvious, but I have a problem configuring freepbx... Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu installation guide on freepbx.org. System pxe-boots from a server with NFS root on same Using * 1.2 current (from source, not .deb's) Using mISDN-streams (from source, not .deb's) Using freePBX-2.2.1 (from source, not

Is there anybody in this group that is using vISDN on an A@H server? I have a couple of questions, which are quite lengthy, and I do not want to pollute this list of there's no use in asking to begin with! TIA & BRgds -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55

/etc/conf.d/local.start -----Original Message----- From: Francesco Peeters (Asterisk) [mailto:francesco@fampeeters.com] Sent: Wednesday, January 11, 2006 3:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Zaptel modules load, but Asterisk fails at startup On Wed, January 11, 2006 21:36,

Hang on.... there's a non commercial G729 codec that will work with Asterisk? Can someone point me to where I can find it? Thanks, Doug. -----Original Message----- From: Francesco Peeters (Asterisk) [mailto:francesco@fampeeters.com] Sent: Sun 1/22/2006 8:27 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion

I have a question, I have to provide a solution for an office that will be almost abandoned, and there will be one or sometimes two persons 2 days a week. The main number however should be preserved. They have several ISDN BRI connections, most of which will be dropped. Only one will be retained, for 2 reasons: 1) It has the ADSL link 2) The number has been the main contact number for over 20

Yep I did the same. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Francesco Peeters (Asterisk) Sent: Saturday, 21 January 2006 5:34 PM To: fbraeuer@gmail.com; Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

I downloaded and installed the none commercial g729 codec very often now I only disable HT on my systems I think * doesn't like this One of the guys @ digium advised me to turn it of, since they haven't written * to be multi treading any way The codec I download is the http://kvin.lv/pub/Linux/Asterisk/codec_g729-gcc-pentium4.so It should work fine. Wouldn't know what it

Thanks but this is for a test, I didn't buy the first one as it's a non commercial installation. I'm trying to test bandwidth etc so I need to try out how 4 of them handle the link simultaneously, I just don't know how to add a second test license. Dean ________________________________ From: asterisk-users-bounces@lists.digium.com

Does anybody else see the same behavior for VoipBuster connections? When I trace one of the other SIP peers, I see it sends this message: ---------------------------------------------------------------------- <--- SIP read from 82.101.62.99:5060 ---> SIP/2.0 180 Ringing Allow: INVITE,ACK,BYE,CANCEL,PRACK,SUBSCRIBE,NOTIFY,UPDATE Call-ID: 740540ee64fa957513ce89f03ef5e3f2 at sip.xs4all.nl

Hi All, Any VoipBuster SIP users on this list that'd be willing to test VoipBuster outbound VoIP to PSTN? All numbers I tried from my (*) server are supposedly being connected, but no phone rings! Also their new WebStart function doesn't cause my phone to ring either... TIA! -- Francesco Peeters

I have been pondering the following... Voipbuster used to announce the cost of the call, but the new SIP servers do NOT. Because there's the choice between free (VoipBuster) and non-free (ADSL), I'd like to let the user know which one is actually being used by announcing it before the actual call gets connected, ie immediately after the channel proceeds from setup to actual

Hi All Apologises if this has been disussed and I missed it. My SetUp I have a sip phone registered to an asterisk box (a1) in one location 1. This phone dials an extension which is in another location, so a1 passes the call via IAX to the other asterisk (a2) in location 2 which then dials the local phone. My Problem The caller ID setup in the sip.conf for the phone registered to a1 is not

Hi, I am new here on this list, and have a problem of which I hope that somebody here can help me with it. I have a Voipbuster account, with which I would like to make phone calls via my Asterisk PBX. If I let X-Lite register directly at voipbuster.com, everything is OK, but if I let Asterisk register there, it says "registration for XXXXXX@sip.voipbuster.com timed out, trying again",

Hi, all I am still battling to connect * and voipbuster. What protocol does it use? Ethereal capture shows UDP traffic, but no SIP or IAX traffic when using their client. VoipBuster client connects to connectionserver.voipbuster.com on port 11112 for authentication. Call itself is placed on different server. I have tried to connect using SIP and IAX and it seems that no authentication is

Hello, I'm trying to receive a fax to my inbound number from voipbuster. Asterisk receives the call and starts the rxfax application successful, but then nothing happens. The calling party is still hearing a ringing tone, or sometimes nothing. Voicecalls are working correct and without problems. For testing I've add a local number (300) to the dialplan. When I call this number

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

I've got a strange situation with musiconhold. It works if I dial my extension 6000: >From extensions.conf: exten => 6000,1,Answer exten => 6000,2,MusicOnHold() Debug output if I call 6000: -- Executing Answer("SIP/gs1-b6ee", "") in new stack -- Executing MusicOnHold("SIP/gs1-b6ee", "") in new stack -- Started music on hold,

Hi;? When connecting via VoipBuster or VoipStunt, "I can hear them but they can't hear me"?. This happens with VoipBuster or Voipstunt. Registration is done correctly. I thought it could be something related to NAT, but I don't have this problem when using VoipUser or Asterisk2PSTN, for example. ? I tried with different codecs: gsm, alaw and ulaw but no change. ? So, now?I