similar to: module zttranscode: what is it?

Hi, I have an Asterisk 1.2.9.1 box connected to an ISDN line via a beronet card (with ports in PTP mode). I noticed a long delay when making outbound calls, more precisely between (taken from Asterisk CLI) "Called 1/XXXXXXXXX/s" and "mISDN/1-u43 is proceeding passing it to SIP/8-5486" I searched on misdn.org but found nothing. I'd like to understand if this delay is

Hi, I'm getting crazy about ztdummy. I have to replicate a PBX where ztdummy is working fine but for some reason I cannot. The two machines have the same kernel, motherboard, the same gcc version and the same zaptel 1.4.8. On the second machine zaptel compiles without errors and ztdummy.ko is generated but when I modprobe it I get the following error in messages: rtc: lost some interrupts

I was just looking to see if anyone else has seen this problem as well. When asterisk starts up it loads the zttranscode module. The problem exist when I use the init scripts to stop asterisk and then use the zaptel init script to unload modules. Since the zaptel init script didn't load the zttranscode module it will error out when trying to unload the modules. I built

Hi, I am trying to use zaptel module on an Ubuntu 5.10 distro (2.6.x kernel) using gcc 4.0.2. Compilation does not give me errors so after a 'make install' I try to load zaptel module with insmod but the following error arise: *insmod: error inserting '/lib/modules/2.6.12/misc/zaptel.ko': -1 Invalid module format* Is there anybody who can help me?? TIA Giorgio --

Hi, I'd like to build a personal PBX connecting 4 or 5 analogic phones with a ADSL line and I'd like to know what is the right card I need I visited digium site and I think TDM400 could be the right choice but I cannot understand how it works...I think it has 4 slots where 4 modules (FXS or FXO) can be inserted. How many cards do I need to connect my ADSL line to 5 phones? I think I

Hi, I live in Italy and I have an Asterisk 1.0.7 box with a HFC monoBRI card connected to my cisco router which is connected to FastWeb provider: does anybody knows why every time my cisco router turns off, my telephone connection to Fastweb drops (while internet connectior is ok)? Restarting Asterisk is worth nothing. TIA Giorgio --

Hi, I've upgraded my Asterisk to 1.0.7version patched with bristuff 0.2.0-RC8c. I'm using the same extensions.conf but it seems now include instruction doesn't want to work, here follows an extract: [inbound_menu] include => ins_exts exten => _X.,1,Answer exten => _X.,2,Wait(1) exten => _X.,3,Background(msg) exten => _X.,4,Background(3-sec-pause) exten =>

Hi Rosario, I have a problem about CDR: inbound calls are not correctly logged in CDR, it says they are always answered even if they are not. It is very strange since outbound calls and internal calls don't suffer this problem. I'll tell you more: I made Asterisk print the DIALSTATUS variable and it is ok, says BUSY when my internal hardphone SIP is busy. Or maybe it is allright and

There is no static interval. But i found out that it was my IP-Phone Service Provider that was having serviceproblems today. -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Giorgio Incantalupo Sendt: 26. august 2005 11:33 Til: Asterisk Users Mailing List - Non-Commercial Discussion Emne: Re: [Asterisk-Users]

Hi, is there anybody who knows what this warning means?? WARNING[27309]: chan_sip.c:8875 reload_config: Section '10' lacks type TIA Giorgio -- ____________________________________________________________________ GIORGIO INCANTALUPO Tel. +39 02 9350 4780 (104) FG&A Software 20017 Rho - Via Puccini, 8 E-Mail : gincantalupo@fgasoftware.com Internet: http://www.fgasoftware.com

Hi, I'm using a HFC card on my asterisk box. I tried to make a conference but it doesn't work. I read on internet to use ztdummy but my server has no uhci (only ohci but it doesn't work) so I cannot use it. I tried zaprtc but after loading the module (it appears when typing lsmod) nothing has changed. Should I buy a x100p to get the right timing? Or there is another solution? TIA

Dear all I have asterisk 1.4.11 on centos 4.x i have installed 2 PRI on is asterisk and it is working fine but i got this DTMF error on asterisk CLI what is it ?? -- Zap/36-1 is ringing -- Zap/36-1 answered SIP/5406-9fa59770 -- Channel 0/1, span 2 got hangup request, cause 31 [Sep 13 22:10:29] WARNING[7191]: app_dial.c:741 wait_for_answer: Unable to forward voice or

Dear list, I need to setup asterisk to send and receibe fax. I just looking about SpanDSP, Hylafax/Iaxmodem, AsterFax,...etc. The asterisk box has Digium hardware, one TE420B and one TDM2402 (8 FXO ports). I just read the SpanDSP (txfax and rxfax) makes the system more unstable that Hylafax/Iaxmodem. And the Asterfax solution does dislike cause its licensing. The TE420B, is configured in E1

We've just had the problem where our DNS server went down, and * started to act "funny". Is the best solution to install a local DNS server on the * box, and have no other DNS servers ? - this is an internal app, no need for any external DNS resolution at all. Julian. ______________________________________________________________________ This email has been scanned by the

Hello All, Does anyone know of a software emulator that can be used to simulate hardware such as an E1? I need to play with AstUnicall in a test environment and don't have access to these circuits from the US. If there is an alternate way to test/play with AstUnicall, please let me know! Thanks, Mark -------------- next part -------------- An HTML attachment was scrubbed...

Hi: I want to use asterisk1.2 but I don't know which version of asterisk1.2 and zaptel1.2 is best.Please offer me one version of asterisk and zaptel and libpri.How about asterisk1.2.24 and zaptel1.2.20.1 and libpri1.2.5?And do they work togather well? Best regards. --------------------------------- Pinpoint customers who are looking for what you sell. -------------- next part

Hi all, When I do a test call into the box (which is running latest version of Trixbox) it all goes fine. If i decide to hangup the cellphone (during the ivr playing options) the system does not recognize the hangup and the system continues through and ends up at the timeout option. What settings do I need to change to fix this. Is it the rxgain? If so is there something i can use to figure

I figured that asterisk can do conferencing if we have zap interface. The BRI cards I have they do not have Zaptel. How do I enable conferencing on my server? Regards Ajey

Hello every boy again I have some problems with modprobe. When I type "modprobe zaphfc", this error happens "FATAL: Module zaphfc not found." And when I tyoe "ztcfg -vv" this error happens: Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected Someone can help me??? Thanks to all.

Afternoon, I was hoping someone could point me in the right direction. I have an asterisk PBX deployed in China using a TDM400P based card. The incoming calls are being picked up correctly, but are not being hung up. I suspect that this might be an issue with the signaling that has been selected. If anyone here has deployed asterisk in china using an analog card, it would be a great help