similar to: aastra phones with asterisk 1.2.17 - hangup after 20 seconds

I found a bug in the latest T38 passthrough patches, the effect is that a non-SIP call after being put on hold is then lost, no resume is possible. The fix is to be applied in the chan_sip.c file: } else { /* No bridged peer with T38 enabled*/ transmit_response_with_sdp(p, "200 OK", req, 1); } - } + } else transmit_response_with_sdp(p, "200

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Does anyone have Shared (bridged) Line Appearance working in Asterisk 1.4? Specifically with the Aastra 55i. Specifically, I am using the Aastra 55i with the expansion module. We want to see if other handsets are being used. (BLF) Getting BLF to work would be a great start. It sounds like setting up the hints properly will achieve this. right? Not totally sure how this should be configured.

Hi Everyone, We use the top buttons on Aastra 55i to login and logout from Queues. This is the order: Button 1 = Login to English Queue Button 2 = Login to Spanish Queue Button 3 = Logout of English/Spanish Queues There are indicator LEDs on each of these buttons. Is there anyway we can send a SIP request or some other communication to get the Aastra 6755i phone to keep the LED for login set

Hello my friends... Currently we are using the following firmware versions on ours aastra 55i: Firmware Information Attribute Value Firmware Version 2.1.0.2145 Firmware Release Code SIP Boot Version 2.0.1.1055 Date/Time Jun 20 2007 06:20:29 Can we make a firmware upgrade to the latest one: 6755i (55i) SIP, V2.5.3.18, January 2010 , English , ZIP , 2,849 KB on the site:

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Bill I have adtran750 with Vista/Aastra 350, 390, & 480's never seen that one tim -----Original Message----- From: asterisk at billheckel.com <asterisk at billheckel.com> To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com> Date: February 21, 2003 12:52 PM Subject: [Asterisk-Users] Fun new problem with Aastra 390 ADSI phones >I seem to have

Hello all, Our setup consists of an asterisk server (version 1.4.8 ) with a TDM400 card (4 FXO ports) and about 10 aastra 5Xi phones (2 phones are 57i and the rest 55i). The asterisk server is also configured with two SIP trunks. The problem that we're having is that if at any time there is an internet connection interruption to the asterisk server all the aastra phones freeze. If we disable

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Hi Since Im using the mISDN drivers and no zaptel stuff, I had to install ztdummy to get MeetMe to work. Well, that was the plan. Now, after getting the latest zaptel version over CVS (Im using Kernel 2.6), uncommenting all the modules except ztdummy in zaptel.sysconfig file and compiling this by "make", "make install" and "make linux26", I rebooted and

Hi Everyone, I can connect the Jabra GN2124 + GN2100 (smart cord) to the Aastra 53i receiver port and I get a tone. But when I connect it to the headset port there is no tone. I am running firmware 2.4 and I can't seem to find that DHSG, EHS or whatever the setting maybe called to enable to get this headset work with the phone. Can anyone quickly tell me where the audio options are on this

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer

Hi, What are the main differences between Aastra SIP phones 6730i and 6750i series ? Aastra corporate web site mentions : "The Aastra 6730i Series offers exceptional features and flexibility in an open-standard enterprise grade IP telephone" for one "The Aastra 6750i Series offers features and flexibility in an open-standards based, carrier grade IP telephone." for the

Hi, I can't find a way to tailor DHCP/TFTP/HTTP environment so that brand new Aastra SIP phones can be auto-provisioned when config files are stored in a specific TFTP subdirectory instead of TFTP root directory. For instance, TFTP root directory is /srv/tftp. When config files are stored in /srv/tftp, a new Aastra can find its config files. When config files are stored in /srv/tftp/aastra,

hello i hope i am posting to the right list, i am a totally blind user, and i want to reprogram my aastra pt 480e phone, my friend used the web configurator, but i think he programmed thw wrong codes, a few questions, is it possible to damage the phone by programming it wrong? also, how does one reset it literally to factory defaults? as unplugging it and replugging it back into the wall

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

Is there a command in Asterisk that will cause all Aastra phones to reboot and/or recheck for new firmware? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070312/d394c874/attachment.htm

Just found out my maintanence agreement with fonality does not cover phones over a year old. So, of course, they don't repaird phones, only replace them. Very worldly of them... Anyone know where I can get an Aastra 480i repaired? The phone works on speakerphone, but when you lift the receiver offthe hook, the phone does not engage. There is something wrong with the "hook". The

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?