similar to: Feedback on Linksys SPA-921 and GrandStream GXP-2000

I started out a few years ago with some SPA-841 sets, because the Grandstream 2000 I thought I wanted was perpetually delayed. The GS had more call appearances, and I didn't want just the 4 max that the SPA offered. As it turns out, with the greater flexibility of VOIP, I don't need 'dedicated' CAs the way I needed them on ISDN previously, so 4 is actually adequate. Along the line,

Can anyone who has used both comment on the pros and cons ? Need to buy about 30 of these, for a small company with limited IT support. Julian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Anyone else have problems with phones like SPA-922, SPA-921, etc? Inbound audio is perfect but the remote end reports audio quality issues on the audio the handset is sending out. It's not the network.... I've tried asterisk 1.2, 1.4. I've used ulaw, G726, G793 & G729. Ulaw seems to be the least problematic but its still an issue. Doesn't matter if we send the calls to the PSTN

Hello! We are using several Linksys SPA-941 in our office. After IP change occur devices seems not to be reachable, actually unavailable! Devices is connected, e.g. we can place a call using SPA-941 but can not receive any calls... Kim __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hello, I'm thinking of ordering an OpenVox A400P01 (A400P + 1 PORT FXO Bundle) for use in a old IBM 8364 thin client: http://www.openvox.com.cn/products_detail.php?genre_id=9&id=28 http://silicon-verl.de/home/flo/software/netstation-8364/ Has someone already used this hardware with Asterisk, especially on a small piece of hardware like this, and could offer some feedback? Thank you.

Hello We're successfully running Samba 3.0.28a on a FreeBSD server and sharing files with XP clients. There's only one problem: By default, XP doesn't let the user save the password, so they have to type it every time they reboot. Is there a way to tell XP to remember the password between reboots/sessions? Thank you.

I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

Hello list, Topology diagram first: [PSTN]-----[SPA 400]--------[NETGEAR SWITCH]-------[ASTERISK BOX] | | | |__[SPA 921] | [SPA 901] The problem is the

Hi all, i need an XML file format which is used in remote provisioning of different spa devices. Please somebody tell me the format or tell me where can i find it on the internet. I also need a list of parameters which are configured using auto-provisioning. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

Hello I'd like to configure Samba on a test host running Ubuntu so that I have full read/write access from XP to a sub-directory of the root filesystem. The host is located on a LAN behind a firewall, so security is not an issue, ie. I'd like to configure Samba with no/minimal security. Currently, I can read but can't write. Between /etc/passwd, smb.conf, and access rights to the

Hello I waited 15mn in case it was due to some browsing issue, but the directory I shared on a Ubuntu server still doesn't show up in the XP Net'hood, with no error when starting smbd or in /var/log/samba/log.smbd. Here's the smb.conf I wrote: =================== # cat /etc/samba/smb.conf [global] ;Checked: Same wg on XP workgroup = WORKGROUP server string = Samba Server %v

Hi all What headset do people use with the GXP-2000? Any recommondations for or against particular models? Thanks Peter -- Peter Bowyer Email: peter@bowyer.org Tel: +44 1296 768003 VoIP: sip:peter@bowyer.org

Hi, I looked at the docs and probably missed it: is there a way to set a dialplan on the GXP-2000? (to avoid having to press "Send") Thanks, -- "Computers are useless. They can only give answers." - Pablo Picasso

On my Grandstream GXP 2010 I have the possibility for 6 channels and thus 6 different accounts... Line 1 I define an account that registers directly to an online Asterisk-server, somewhere in a datacentre. Line 2 I define an account that registers to the local Asterisk-server (NSLU2 unslung) When I activate both accounts, only the first account (to the Asterisk-server on the internet) registers.