similar to: Call Pickup with more than one argument

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

I'm working through my list of features people will expect, and Hold Pickup is at the top at the moment -- has anyone done any work on this? We've had some unpleasant experiences with call parking, and everyone seems to like the Hold Pickup model. If you don't know what I mean by Hold Pickup, it's sort of a reverse transfer; pick up the nearest phone and dial

Hello I have a Junghanns ISDN BRI card for incoming calls and use SIP Polycom IP300 phones. My config files look like this: features.conf pickupextn = *8 zapata.conf context=frompstnisdn group=1 callgroup=1 pickupgroup=1 I also edited sip.conf like this: group=1 callgroup=1 pickupgroup=1 But on internal and incoming calls if I dial *8 from any phone I cannot pickup. Do I need to add

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]:

Dear all, I tried to use the following sintax to implement call pickup in Asterisk 1.2.17 with no success: exten => _**5219/5215,1,Pickup(5219) exten => _**5219/5215,2,Pickup(220408108) exten => _**5219/5215,3,Hangup Asterisk seems to just do the first priority command (Pickup(5219)) and if the ringing call comes from the channel 220408108, it doesn't jump to the second priority

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

I have a TDM400 in the server. I want to press **1XX to pickup a call. It is ok if I pickup a call dialled from 1XX to 1YY (internal network call). However, it is failed to pick up a call from PSTN thro' TDM400 card. It seems I can't guess the correct context of it. How can I know the context of the call using CLI? The default context of the TDM400 is from-pstn but pickup still

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Getting module_request errors from SELinux. Errors being thrown by metacity sendmail.postfix cleanup trivial-rewarite local postdrop pickup All errors are essentially the same System was working well until I began to apply some basic security hardening configuration. Postfix started complaining when I made /tmp noexec, nodev, nosuid, and then did a mount --bind of /var/tmp under

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Hi to all, i already searched the archive without finding a solution to my problem. I have asterisk installation 1.2.18 to support multiple virtiual PBXs. I use SIP peer in the format <ID>-<EXT> to let every virtual PBX to share the same numbers of EXT. Ex. (PBX ID 10 Extensions) 10-101 10-102 10-103 (PBX ID 20 Extensions) 20-101 20-102 20-103 I use some rules in the dialplan to

Hi, I'm using the Pickup() application for direct call pickup having the following line in the dialplan: exten => _*88XX,1,Pickup(${EXTEN:2}) It works OK, though I would like to have to get the original caller ID number forwarded to the phone where I do the pickup and have it displayed during the call. Currently the string *88xx remains on the screen of the phone I do the pickup. It

I'm trying to pick up a ringing SIP phone (203) across the office with exten => *9,1,Pickup(783743) where 783743 is the local part of the number that our ISDN works on. I tried all of these first: exten => *9,1,Pickup(203) exten => *9,1,Pickup(SIP/203) exten => *9,1,Pickup(203@internal) and got a "declined" message back from my phone (snom 300), so I then

Hi everybody! I have asterisk 1.8.3.3 with pickup deadlock avoidance patch applied in production. I'm use next dialplan construction exten => *,1,PickUP(queue-number) exten => *,2,PickUP() Can anyone tell me how can I stop dialplan execution on the first priority if that priority's pickup was successfull? I tried *i* priority, but no luck. Does pickup app returns any value in