similar to: help - UNSUBSCRIBE

Hello Asterisk users, Can someone thwack me with a clue stick please? I am following the Asterisk TFOT book Dial() example trying to get the limit and announcements to work as per below. These settings seem to have no effect. There are no warning messages after 4 minutes or every 30 secs thereafter and the call lasts longer than 5 minutes. gunner*CLI> show dialplan [ Context

I have a [start] context that all my inbound and '0' calls are routed into. Because of the way I want to set my system up, I want to prompt the user to enter a 1 if they know the extension, or a 2 for a directory and nothing else. It works, however there is a 5 to 10 second delay after enter the 1 or 2 before the system responds. I have read over the wiki on how asterisk handles digit

Hi! I have an T1 line for using with IVR AGI. I receive the calls in my T1 but my dialplan has an error but my extensions doesnt have the error that show me asterisk. I dont know from where asterisk take extension 8 and how is playing ss-noservice because in my dialplan is not exist. Any help or any cluees? Verbosity was 5 and is now 7 -- Starting simple switch on 'Zap/1-1' ==

I hope I have this wrong, but when I have a bunch of priority 1 NoOp's created from regexten in sip.conf, and I do an 'extensions reload', I lose all the priority 1 NoOps! This can't be right... this means that in a production environment, if you make a change to your dialplan and do an 'extensions reload', you lose your ability to terminate calls to phones on this system.

Hi We have 2 servers running samba 1 is linux 7 /samba 4.2.3 1 is linux 6 /samba 3.6.23-25.0.1 Both are joined to a Windows Domain Both use ADS for security (we use CAC on the client) Recently users of the samba 3.6 shares have been having trouble connecting The issue seems to be theclient registry setting :

Hi - after hearing others rave about * I thought I'd have a go - extract from a 'make' on a stock debian system as follows... (I tried to post the whole make up to this point but it was too big for the list) make[1]: Leaving directory `/usr/src/asterisk/channels' make[1]: Entering directory `/usr/src/asterisk/pbx' gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes

Hi Chris, Yes the call was from PSTN and your solution worked great! I've read about SetCallerPres earlier but I didn't connect the dots this time. Thanks alot! :) Regards, Jan -----Ursprungligt meddelande----- Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r Christoph F?rstaller Skickat: den 29 mars 2007 15:29 Till: Asterisk Users

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

Hello All, I was wondering where does Asterisk stores the blacklist numbers? I looked into the dialplan and it shows that it *"Set(DB(blacklist/${blacknr})=1)"* the number... Does it save in MySQL DB? hyperion*CLI> show dialplan app-blacklist-add [ Context 'app-blacklist-add' created by 'pbx_config' ] '1' => 1.

Hello everyone... I'm trying to get up a testing pbx installation. Following instructions of what've read from the handbook and from asterisk's wiki, I wrote the dial plan as follows: [general] ; ; static = yes ;[globals] ; [default] ; exten => 0,1,Answer() exten => 0,2,Playback(fcopba1) exten => 0,3,Hangup() exten => *0,1,Answer() exten => *0,2,Record(fcopba1:gsm)

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

I have an "outbound-ld" context as follows: [ Context 'outbound-ld' created by 'pbx_config' ] '_1NXXNXXXXXX' => 1. Macro(enumdial|${EXTEN}) [pbx_config] 102. Wait(1) [pbx_config] 103. Set(LINE=${IF($[${LINE}=pots]?link2voip:${LINE})}) [pbx_config]

Greetings, Running CVS HEAD about 3 weeks old, I have been beating my head trying to get this to work properly.. Or at least figure out what's going on. Maybe I have done things wrong... I have created a 'catch all' extension at the end of our last context where all phones & voicemail extension exist. This catch all is included in all and works quite nicely except when voicemail

Asterisk isn't playing my voicemail greetings even though they are defined. Below are the relevant configs(from show dialplan) as well as the level 3 verbose messages asterisk is giving. Also a listing of the directory. Asterisk just plays the "The person at extension..." message, not the greetings I have recorded. Thanks -- asterisk*CLI> show dialplan macro-stdexten [

Hello. I have been beating my head over this problem for about 6 hours now. I have a SIP peer, who I register to (successfully), who should be directing all incoming calls at my [default] stanza in my extensions.conf: [ Context 'default' created by 'pbx_config' ] 's' => 1. Wait(1) [pbx_config] 2.

Yes, I have tried that too (i.e, exten => +17775551212,1,Log(WARNING, TWILIO)). It does not work and NO error message in CLI. I have also tried http://orourketech.com/elastix-plus-sign-caller-id-messing-things/ since I first emailed this group, but that does not seem to work either. Here is my log: [Dec 2 15:09:28] NOTICE[26464]: res_pjsip_session.c:1920 new_invite: Call from

I was wondering why *foo at default should match '_*[0-9a-zA-Z].*0.' in 1.6.13. Who is making the parse error, * or me? CLI> dialplan show *foo at default '_*[0-9a-zA-Z].*0.' => 1. NoOp(${EXTEN}) [pbx_config] 2. Set(accountcode=${CUT(EXTEN,*,2)}) [pbx_config] 3. Set(extension=${CUT(EXTEN,*,3)}) [pbx_config]

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

i have a box running debian sarge with asterisk installed from distribution packages: CLI> show version Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by kk@nyx on a x86_64 running Linux I have managed to configure a simple dialplan (the PBX task is quite simple as this is a small office with just a few phones) I have one Zap (PSTN) line connected to it and one SIP to a local provider. After

At approximately 3:15pm I shut down the office MySQL server to change out some hardware. Shortly after I received a call from one of two customers whose asterisk servers output CDR data to that server. They could not place or receive calls. Shortly after that I received a call from the other customer. I'm below providing output from the message log (At debug level). I don't see much