similar to: switches

I'd recommend any of the following, which are all in your price range Snom 300 Polycom IP430 Polycom IP501 Aastra 9112i Linksys SPA-922 Grandstream GXP-2000 Cory Andrews ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Wednesday, November 01, 2006 11:17 AM To: Asterisk

Hello list, I am doing some work for a non profit group. As part of this, I am going to be putting in a 30 handset Asterisk solution. We are trying to keep the costs down as much as possible, as this job includes cabling, I am looking at POE solutions. On the switch side, I am considering something like some Netgear ProSafe FS726TP 24 port switches, or maybe the equivalent Linksys SRW224MP 24

Good Day Everybody, I am in the process of planning a phone system for a small business (15 extensions - 4 PSTN lines [to be connected by ATAs]). The plan is to install an IP Phone everywhere there is an existing computer workstation - using the same LAN for phones and computers. The layout involves workstations connected to two switches (the unmanaged 'dumb' type) and the switches

I need to buy some new phones for our own offices. I've used only Polycom phones until now, but I'd like to broaden my experience. I'm trying to decide which phones to experiment with. I have these options: - A combination of Polycom, Aastra and Snom - Just Polycom One the one hand, I'd like to keep things uniform, since it greatly simplifies provisioning. On the other hand, I

Does anyone have X-Lite build 1059 working fully with Asterisk? The GSM Codec works very well now but we have problems when using G711 in that when I setup a ping between the two sites and then watch the latency, it steadily increases and starts at about 150ms and goes up to 2500ms within about 20 seconds. I have not investigated fully but I guess that its sending ever increasing size packets.

Hi ! Sorry if this is a long post... I had this setup for about a year without problems : Network A <-> wrv200 <-> internet <-> wrv200 <-> net b The 2 networks are linked with an ipsec vpn. The 2 internet connections are with the same cable company to minimize latency, both separates /24 subnets. On network A, I got 2 computers, a single sip phone (aastra

What hardphones support xml/html/xhmtl/microbrowser? I need an inexpensive SIP hardphone that can run simple applications (queue status, etc). The phones I know of: Aastra 480i, 9112i, 9133i (though limited by 3 LCD lines on the 91xx seems kind of silly) Cisco 79xx Mitel 5235 Polycom IP601 Any others? -Dan

hello list i need your help please regarding an issue with snom300 and aastra6731i using asterisk 11.13.0 asterisk snom 300 8.7.3.25 astra 6731i 2.6.0.2019 i have configured the trunks like below 100 in snom300 200 in snom300 300 in aastra6731i 400 in x-lite the calls between x-lite and aastra ====ok inbound and outbound the calls between x-lite and snom300====> ok inbound and

please no body has som with aastra can help me in this issue 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit <salah.elharit200 at gmail.com>: > hello list > > i need your help please regarding an issue with snom300 and aastra6731i > using asterisk > > 11.13.0 asterisk > > snom 300 8.7.3.25 > > astra 6731i 2.6.0.2019 > > i have configured the trunks like

Victor Hoodicoff wrote: > > > I think your impressions of Aastra are outdated. Install the latest > firmware, download the latest documentation and test and THEN give an > opinion! Did you miss the part when I wrote I have Asstras sitting on my desk collecting dust. I program on average about 5 per month, deal with about 40+ per day. They're as impressive as that Hyundai in

Hi everybody, One of my customers wants to buy IP Phones and Asterisk solution, but his requirement is if he'll not be happy with Asterisk, his phones should be able to work with other IP PBX systems as well, so that he doesn't have to buy new phones again. After all IP Phones is the main investment. He'll most probably go with Nortel IP PBX system if he'll be not satisfied with

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Hi, Does anyone have experience with Asterisk and the aastra 9112i or 9133i phones? I am looking at purchasing some, and was curious how quality, and stability was with them.

You would need to give more information really. Your sip.conf file listing the entries for the phones especially which codecs are permitted. A copy of the 'asterisk -rvvv' console output when you make the call. On 27/03/15 17:05, Salaheddine Elharit wrote: > please no body has som with aastra can help me in this issue > > 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit >

thank you for your response below the asterisk -vvvr Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [0176XXXXXX at from-internal:1] Macro("SIP/300-00000192", "user-callerid,LIMIT,EXTERNAL,") in new stack -- Executing [s at macro-user-callerid:1] Set("SIP/300-00000192", "TOUCH_MONITOR=1427481319.470") in new stack --

Hi all, We have a client that needs to setup about 80 desk phones (about 50 in one location and about another 30 in 5 different locations). Which brand/model would you recommend. We were personally thinking in recommending either Cisco, Aastra, Polycom, or Snom, for we've heard great things about them. However, having no real experience with them makes it hard in recommending one to

Looking to outfit a 8-person office shortly and am looking for IP phone recomendations. Saw recent threads and the wiki with all kinds of suggestions and notes on configs but little on the "feel" and sound quality. I have a PolyCom SoundPointPro analog desk/speaker phone and the Cisco 7940 here. How to the other business-class phones compare, from a user's point of view, to these?

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

who can tell me how to do TDM over enthernet ? pc a connect pc b only use TDM card? thank you John. -----????----- ???: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]?? asterisk-users-request@lists.digium.com ????: 2004?12?23? 11:47 ???: asterisk-users@lists.digium.com ??: Asterisk-Users Digest, Vol 5, Issue 336 Send Asterisk-Users mailing list

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read