Displaying 20 results from an estimated 200 matches similar to: "beronet BN8S0 and isdn phone"
2007 Mar 14
1
beronet BN4S0
Hello.
Just installed the Beronet BN4S0 card. But i can't connect to my ISDN Line.
misdnportinfo gives (what does ":Layer 4 protocol 0x04000001 is detected, but
not allowed for TE lib" mean?):
best regards and thanks
t.
asterix asterisk # misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001
2007 Mar 23
2
cause 127
Hello.
Someone knows what cause 127 mean. The phone that i'm calling rings once and
than the connection interrupts:
P[ 5] --> l3id:10040
P[ 5] --> cause:127
P[ 5] --> out_cause:127
P[ 5] --> state:ALERTING
P[ 5] --> Channel: mISDN/5-1 hanguped new state:CLEANING
P[ 5] $$$ CLEANUP CALLED pid:3
best regards
--
Thomas Stein
knowledgeTools? ....damit Sie sehen, was Sie
2007 May 31
3
moh backround?
Hello.
Is it possible to "mix" musiconhold music and playback voices? What i want to
do is something like this: A person calls a number, gets a playback voice
while in background music is playing. The configuration i use at the moment
don't do what i want. Someone knows how to do it? Thanks in advance.
exten => 18,1,Answer
exten => 18,n,Background()
exten =>
2007 Jun 11
5
change moh during a call?
Hello.
Is it possible to change the defined moh sound file within an extension?
I have:
exten => 18,1,Answer
exten => 18,n,Wait(3)
exten => 18,n,SetMusicOnHold(durchwahl)
exten => 18,n,Dial(SIP/118,15,m)
exten => 18,n,Hangup
Now i have the situation someone calls and my phone is ringing while moh
(durchwahl) is playing. When i pickup the call and press the hold button
during
2007 Nov 07
1
CDR on channel not posted
Hi.
Asterisk 1.4.12.1.
I get a lot of message like this. Someone knows what this message mean? Do i
have to worry about it?
[Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on
channel 'Local/152 at local-f137,1' not posted
[Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on
channel 'Agent/152' not posted
[Nov 7 15:24:25] NOTICE[31247]: cdr.c:434
2007 May 30
1
fax2mail ann missing CallerID number
Hello.
I have a problem recieving fax without a callerid. Somehow the script i'm
using fails and i don't know how to fix it. Does anyone have an idea how to
solve this? Here an example of a working fax transmission:
>fax2mail v2.0
> Triggered on Tuesday, May 29 2007, at 10:38 AM
> $1 = CallerID number of fax sender = 02365207150
> $2 = CallerID name of fax sender =
>
2007 Nov 20
0
sl75 wlan not able of being pickuped?
Hello.
I have a strange problem. Its not possible to pickup a call that was placed
with a Siemens SL75 Wlan. When this phone calls an internal number and i try
to pickup (*8) the call from my phone i get nothing. It seems i have the call
for one second or so but after that the call is being cancelled. No problems
with other phones (polycom, grandstream). Attached the complete sip debug log
2007 Jun 11
1
MOH Problems.
All,
I am using Asterisk 1.4.4 and it is not playing any MOH.
I think the underlying problem is the following error:
[Jun 11 20:25:37] WARNING[3207]: res_musiconhold.c:424 spawn_mp3: Found
no files in '/var/lib/asterisk/moh/asterisk'
[Jun 11 20:25:37] WARNING[3207]: res_musiconhold.c:506 monmp3thread:
Unable to spawn mp3player
Now it does not matter what I change in the
2006 Jun 01
0
Problems with misdn and BN8S0
Hi
i am experiencing some problem with asterisk and misdn
i've patched and recompiled the 2.6.15.5 kernel on the server
i use a BN8S0 card with alla channels in TE mode.
i can load hfcmulti and mISDN_dsp
i load this with:
/sbin/modprobe hfcmulti layermask=0xf protocol=0x22 type=0x08
and then
/sbin/modprobe mISDN_dsp
dmesg returns me the following:
Modular ISDN Stack core $Revision: 1.34
2006 Jun 02
2
BN8S0 Installation problem - 0 devices registrered
hi
i am experiencing some problems with the configuration of an BN8S0 Beronet card.
I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel
2.6.16.18 and the enabled the following:
<*> ISDN support
x x Old ISDN4Linux --->
x x --- CAPI subsystem
x x <M> CAPI2.0 support
x x [*] Verbose reason code reporting (kernel size +=7K)
x x [*]
2010 Apr 28
2
BN8S0, dahdi, wcb4xxp
Hi,
a few month ago, I tried to install zaptel for my Beronet BN8S0 pci card... I
gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to support the card
and I'm very interested to get it to work.
But how to get rid of these annoying qozap driver?
bishop dahdi # lspci -v -nn -s 01:00.0
01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-8S]
2006 Jun 08
1
BN8S0 problem - Extension can never match, so disconnecting
hi
i've configured a Beronet BN8S0 Card with misdn beronet utility.
the card is configured with all lines in TE and P2P mode, and it is
connected with the special cable with an ISDN connection.
i've turned on debugging to level 4, this is the output from the
asterisk cli when i receive a call:
P[ 5] MGMT: Short status dinfo 1000001
P[ 5] MGMT: SSTATUS: L1_ACTIVATED
P[ 5] handle_frm:
2008 Feb 11
1
Multiple homedir entries in smb.conf ?
Hi list,
is it possible to add multiple homedir templates to smb.conf ?
I have a running linuxsystem where homefilesets are mounted
from different windows-servers to subdirs like:
/home/server01/home/USERNAME
/home/server02/home/USERNAME
/home/server03/home/USERNAME
The users come via winbind. In the smb.conf the entry for the
homedir:
template homedir = /home/%U
So how is it possible to
2005 Feb 27
1
Beronet BN4S0 (quad BRI) card, echo cancel, zaptel timing, bristuff ...
Hi,
I guess I'd need to run Beronet quad and octo bri cards under bristuff to
get zaptel features (echo canceling, timing source).... Am I right or could
I achieve this also with chan_misdn - their native driver ?
Running bristuff on Beronet cards is unsupported. Has anyone succesfully run
Beronet quad BRI cards under bristuff recently ? Do they work ?
Regards,
Rob.
2005 Jun 02
1
Does Debian Bristuffed Asterisk work ignore Beronet cards ?
Hi,
we've purchased new Beronet Octobri card and have problems loading modules
for stock Asterisk for Debian Sarge (it has bristuff patches in it).
when loading qozap it says that no multibri card was found although lspci
shows it... There were quite some rumours about bristuff not liking other
than junghanns cards, but don't know if something happened....
Anyone recently used this
2005 Jul 08
0
beronet and tdm400p cards conflict?
Hi,
I'm currently using a beronet quadBRI and a Digium tdm400P card on a
Poweredge SC420 DELL with mandriva 2005 LE (standard installation) but
this particular configuration gives me a problem: sometime the 2 cards
work well toghether, sometimes it is impossible to make/receive calls.
Is there anybody out there who is currently using this configuration
without problems?
TIA
Giorgio
2006 Jun 29
1
beronet BNS40 led blinking: not working or not connected?
Hi,
I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything
seems ok, asterisk gives no error (nothing inside logs) but the 4 led on
the back of the card (which is NOT connected to an ISDN line) are red
and flashing....what does it mean? Is it not properly working or it
means the card is not connected to any ISDN line? The card handbook says
the card has red led but not their
2006 Oct 12
0
Beronet BN4S0 instalation
I'm having trouble installing Beronet BN4S0 card. I have downloaded instructions from here
http://www.beronet.com/download/card_installation_guide.pdf
And when I download install-misdn-mqueue[1].tar.gz I untar it and execute "make" and "make install". This is the output that I get.
[root@nbirma1 install-misdn-mqueue]# make install
make -C app_bundle
make[1]: Entering
2007 Jan 24
0
beronet DTMF detection problem with some Telecom Italy lines
Ciao,
I have an Asterisk 1.2.9.1 box with a beronet dualBRI
(install-misdn-queue) on a Debian distro. I'm experiencing problem with
some Telecom Italia lines: some people cannot choose menu selections or
extensions after hearing intro message. Is there anybody who knows if
there is a particular parameter to set inside misdn.conf (or maybe some
other configuration files) ?
TIA
Giorgio
2007 May 08
0
Beronet card - issue?
Hi all, I have a problem with my beronet card with 2 isdn. I think
drivers and Asterisk are ok but the red led on the card always blinking.
The card is connected with PBX. I post some conf:
[root@gateway ~]# misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib.
->