asterisk users - Jun 2006 - beronet BNS40 led blinking: not working or not connected?

Hi,
I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything 
seems ok, asterisk gives no error (nothing inside logs) but the 4 led on 
the back of the card (which is NOT connected to an ISDN line) are red 
and flashing....what does it mean? Is it not properly working or it 
means the card is not connected to any ISDN line? The card handbook says 
the card has red led but not their meaning.

TIA

Giorgio Incantalupo

Have you startet the asterisk allready?

When i boot my machine, and dont start the astersik, the LED's keep 
flashing all day. (even when lines are connected) and
even  if /etc/init/misdn_init has been startet


TIP: First connect all Lines/Phones to the card, then start asterisk. 
not 100% sure,
but i think the card or the asterisk, or the isdn stack,  will not 
recognize any new lines added during a running asterisk "session".




Giorgio Incantalupo schrieb:
> Hi,
> I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything 
> seems ok, asterisk gives no error (nothing inside logs) but the 4 led 
> on the back of the card (which is NOT connected to an ISDN line) are 
> red and flashing....what does it mean? Is it not properly working or 
> it means the card is not connected to any ISDN line? The card handbook 
> says the card has red led but not their meaning.
>
> TIA
>
> Giorgio Incantalupo
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>