similar to: FWD outgoing problem

I have looked all over the site(s) for help. But heres the problem. Im missing something. In coming works fine from FreeWorld via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

Hi to all the * people out there, Please kind to me as I am both new to Asterisk and to Linux - But I am learning fast. My config is quite simple, I'm just following examples and the Wiki: I have two PC's running X-Lite phones, these work without problems between each other, and I have a GS BudgeTone-100 registered to Free World Dial UP (working no problem). I have tried to

I am having trouble with this. I can dial 1800 numbers fine as well as FWD service numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten =>

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

Greetings, I'm having a miserable time getting Asterisk working with FWD. All the samples show something like... exten => _7., .... How do I get Asterisk to wait until the user is finished dialing instead of trying as soon as it gets the second digit? I can use _7XXX, and dial the FWD 3-digit test numbers fine, but I'd like to be able to dial others... Same problem for outside

Hi, I've been trying to dial out to a cellphone, but all my calls get redirected to 066 (the emergency number at my city, like 911) does anyone know how to fix this, any ideas,? does anyone from mexico has done this? Any comment will be highly appreciated, Regards, Claudio -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Sorry for what may be a basic question, but I have spent a number of hours trawling the forums without resolving the problem, and hence this post. I have just started to dabble with Asterisk, as much for the learning than anything else. I created an account on FWD and used the Asterisk settings that the FWD web site recommends at

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

Guys. Can you dial 800 and 888 toll free numbers using FWD? how do you dial them cause I tried using 1800xxxxx and 1888xxxxx and I simply get a "nobody can asnwer the call" signal on asterisk. Can you dial 800 toll free from FWD?

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

Hi, I can't make outgoing calls via Broadvoice. I have tried each and every configuration that was posted to list previously. I am able to receive incoming calls fine. I get the following in asterisk console: ===================================================== asterisk*CLI> show version Asterisk CVS-HEAD-03/10/05-22:51:28 built by vicky@asterisk on a i686 running Linux

Hello, I have 2 channels in iax.conf [iaxfwd] type=user callerid= Free World Dialup inkeys=freeworlddialup auth=rsa context=incoming qualify=yes [iaxfwd-outbound] type=peer host=iax2.fwdnet.net username=xxxxxx secret=*********** auth=md5 The problem is: When I tell FWD to call me I have this output in my asterisk consol: Executing Dial("IAX2/iaxfwd-outbound-3",

============= SJphone Log ============ Outgoing SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack --

Hi, I am setting up an asterisk server for testing purposes and cannot get voicemail to work at all. My host OS is Linux From Scratch 6.3 and the asterisk software versions I built are zaptel-1.4.5.1 and asterisk-1.4.12. I am using the Ekiga softphone on my Ubuntu desktop machine. My asterisk server and client phone are on different computers but are on the same LAN, i.e. no NAT. I have an

Ok, I must be really stupid here - I'm playing with ael and svn trunk. given the following in ael: context isdn10 { 444601 => { Answer(); NoOp(${CALLERIDNUM}); Hangup(); }; }; isdn10 is the incoming isdn context. why do I get this on the console: -- Accepting call from '01702xxxxxx' to 'yyyyyy' on

Hi, I am new here on this list, and have a problem of which I hope that somebody here can help me with it. I have a Voipbuster account, with which I would like to make phone calls via my Asterisk PBX. If I let X-Lite register directly at voipbuster.com, everything is OK, but if I let Asterisk register there, it says "registration for XXXXXX@sip.voipbuster.com timed out, trying again",

Hello, I am trying to setup my Asterisk box to accept calls from the FWD network. I've followed all the config advice / samples I've found on the web. Making calls to devices on the FWD network from my Asterisk box works flawlessly, but whenever I try to call my Asterisk box from a FWD client I get a busy signal, and a "Call Disconnected" 486 error. What's odd is that I

I have some stuck channels that I think I'm going to have to bounce Asterisk to get rid of, but am curious to know what they are and how they've managed to accumulate. The show up with a channel identifier of '(None)' as in the output below, and do not show up in the soft hangup list, and so can't be cleared by that method. Here is the output from iax2 show channels:

Hello, Anyone else experiencing problems with the latest spandsp (pre3) and last libtiff beta? I'm getting 8 bytes long file, with the TIFF header only during such connection: -- Accepting call from 'XXXXXXX' to 'YYYYYY' on channel 0/2, span 1 -- Executing SetVar("Zap/2-1", "FAXFILE=/tmp/foch.tif") in new stack -- Executing