similar to: modem passthru

So I reached the point where my PRI is accepting incoming calls, but I cannot dialout. I must be doing something stupid, but I can't figure it out. The Asterisk box is sitting between the Mitel and the phone company, and has PRI lines to each. Asterisk was built from CVS r1-0 Log for a call from mitel heading outbound: ------------------------- -- Accepting call from '' to

Anyone have a suggestion on where I can get a decent new MB with 5v capable PCI slots. It seems like every decent server MB on the market has 3.3V slots only. Is diving into the junkbin my only choice if I can't afford to replace the 5v quad-T1 wildcard? Thanks Mark Farver

I've got a new setup (different building) where Asterisk is sitting between the PBX and phone company on a E&M T1 line. Mitel PBX <-> Asterisk <-> Phone company Inbound works. Asterisk gets the in-band digits from the phone company and hands the call off to the Mitel just fine. Outbound is weird. Asterisk seems to expect that the mitel will send routing information

I have a pair of sites tied together with a T1 line running zaptel PPP on either end. The system works, but I keep getting these messages in the kernel logs, and users are reporting connection problems (TCP timeouts, and hangs) especially under high usage. --snip-- HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC

I need to check if a parameter is set so that I can build some information for my application, but No matter how I format my if statement in the file " Application.rb" it return the following error. You have a nil object when you didn''t expect it! You might have expected an instance of Array. The error occurred while evaluating nil.[] Here is the line if params[:day] So we

It appears that my X100P card is only answering after two rings. Ideally, I'd like it to answer on the first ring. Here is the incoming section of my extensions.conf file: [incoming] exten => s,1,Answer exten => s,2,BackGround(demo-congrats) ; Play a congratulatory message exten => 1234,1,Goto(jgunther,1234,1) exten => 4321,1,Goto(mgunther,4321,1) exten =>

I see there is the DigitTimeout application that sets the maximum time between digits before asterisk will interpet. Is there any way to control the minimum? We are having problems with incoming calls on our X100P where callers try to dial 10, but the 1 gets detected twice and they end up on extension 11. Thanks Mark Farver

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Hi again, Well - I didn't see beta8a-2.3.3 in custom dir. Will try. Also I tried to contact Sangoma - they are very fast to answer but main problem is time difference - it's 6 hours between Canada and Europe. Br, dmitry Dmitry Zhukovski System developer ComX Networks A/S Naverland 31, 2 DK-2600 Glostrup Denmark Phone: +45 70 25 74 74 Fax:???? +45 70 25 73 74 Web: www.comx.dk

Hi, after many issues we finally managed to make our system do outgoing calls with perfect quality. However I cannot detect *any* form of incoming call. when I use an outside phone to call the E1 connected to the sangoma a102, I instantly get a fast busy tone. My /etc/zaptel.conf is: loadzone=us defaultzone=us #Sangoma A102 port 1 [slot:1 bus:4 span: 1] span=1,0,0,ccs,hdb3 bchan=1-15,17-31

We are attempting to configure SIP trunking between asterisk 1.2.22 and a Mitel 3300 CX box. The Mitel machine will gateway to the PSTN for us. I found this earlier post about doing this from July: http://lists.digium.com/pipermail/asterisk-users/2007-July/191630.html Unfortunately the promised configs never came ;(. We're having the exact reverse problem: we can register with the Mitel

Hello, Have you tried the wanpipe-beta8c-2.3.3.tgz release in the custom/2.3.3 dir on their FTP site? Also, have you contacted Sangoma for support? They are very responsive. I am using wanpipe-beta8a-2.3.3.tgz and it's been working great on my A104 for a week now. MATT--- -----Original Message----- From: Dmitry Zhukovski [mailto:DZH@comx.dk] Sent: Monday, May 09, 2005 5:20 AM To: Asterisk

I've just had to replace my Hylafax server as the cooling fan in the rack case has died and could not be replaced. My box runs three fax modems, one for each of the original 3 fax machines that got skipped years ago. This means that I now have 3 lots of: USB to seral converter (new box doesn't have any COM ports. 9pin->25-pin serial cable Modem power supply phone line analogue port

On Tue, January 26, 2016 04:57, Gary Stainburn wrote: > I've just had to replace my Hylafax server as the cooling fan in the > rack case has died and could not be replaced. > > My box runs three fax modems, one for each of the original 3 fax > machines that got skipped years ago. > > This means that I now have 3 lots of: > > USB to seral converter (new box

My Setup looks like this: Mitel 200 SX (1st T1) -------- Bell South (2nd T1) | | | Digium TE110P Asterisk MITEL CONFIGURATION Primary Timing Source: 1st T1 Card Secondary Timing Source: 2nd T1 Card ASTERISK CONFIGURATION span=1,1,0,d4,ami (Look to the Span for timing) We are getting a lot of Frame and Slip errors.... Time Slip Frame 7:00 736 950 8:00 690 1200 9:00 437

Is there something special that needs to be done to allow a T100P/T400 to respond to a remote loop request? I am having some issues with a Point to point T1 line using zaptel ppp. This line gave us small problems when we had a pair of Cisco 2600's on either end but now with the zaptel ppp it is going down every couple of minutes for 15 intervals. The phone company says the line is good to

hallo everyone, fyi ... working SIP Trunk configuration between Asterisk and Mitel 3300 ICP attached. let's refine further, please test and share your feedback, regards, Joseph Okoegwale Abuja, Nigeria -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070709/4f7f15e1/attachment.htm --------------

Do you have any extension in default context of your extensions.conf file to accept incoming calls ? It must be something like; exten => 12345678,1,Answer() exten => 12345678,2,Playback(Welcome) ... 12345678 = The DID number you are calling to reach E1 Idris -----Original Message----- From: Erick Perez [mailto:eaperezh at gmail.com] Sent: Thursday, July 26, 2007 7:03 AM To:

I have an Asterisk box, 1.4.30 with a PRI. A Mitel 3300 is connected to the Asterisk box via SIP trunking. When a user calls from the Mitel through the Asterisk box the user can speak but can not hear the far end. But - when I route the Mitel user to echo() it works, send and receive. The Mitel user also can record and playback greetings. One thing I have noticed is that when the Mitel user

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5