similar to: IAX2 - Congestion

Hi list. I have Asterisk installed on a Debian 1.8 6 64-bit. What happens is the following, some channels are not being hangup properly. They run the hangup in dialplan, but the output of the command "core show channels" shows several channels with status "rsrvd." Checking the server's memory, the "top" command shows multiple processes and stopped using the

Good afternoon list. I am experiencing a problem with the CDR and callfiles. What is happening is this: When generating a call with a callfile, everything works perfectly, but the CDR is recorded in the table when they answer the call destination. The field disposition is being recorded correctly, but the duration field is marked with the ring time and billsec is marked with 0. This just happens

Guys, I saw in the Asterisk documentation (queues.conf) that members can register with technologies such as SIP, Dahdi and Location. But I have a specific need for members to be registered as Khompchannel. Ex: member => Khomp/b0L1/9200 But reloading module app_queue.so when I run the command "queue show", the member registered as Khomp appears as invalid:

I am using Asterisk CVS from last week and have been using Realtime SIP for a couple weeks now without any problems. Yesterday I decided to turn on Realtime IAX but I am having problems dialing to my long distance providers like Voicepulse, Sixtel or Nufone. I get the following: -- Executing Dial("SIP/2001-3761", "IAX2/password@voicepulse/19566680301") in new stack

Hi List, I have set up the following in my extensions.conf ; local numbers look like 0262XXXXXX ; but must be dialed 262 262XXXXXX exten => _0262XXXXXX,1,Dial,IAX2/543@voipjet/011262262${EXTEN:4} exten => _0262XXXXXX,2,Dial,IAX2/jhiver@NuFone/011262262${EXTEN:4} exten => _0262XXXXXX,3,Congestion It did work for a while, however when dialing I get: stargate*CLI> -- Executing

I have a few questions with regards to Digium S101I adapter. I would like to use it as a traveling companion, plugging it into various networks (all behind firewall I assume). I'll be registering it into my asterisk server (behind firewall, port 4569 will be open). 1.) If I plug that small adapter S101I into another network will that network have to have port 4569 open as well? 2.) If

Hello, sometimes I'm experiencing autocongest error due "slow response", anyone knows, what this means? Second or third attempt after that happens pass successfully... this happens ever in fastethernet lan, so no problem with lag in wan environment, I'm using idefisk 1.32 on client side (winxp or linux)... PJ -- Executing Dial("IAX2/bill-7",

Hello, I Have an agent on a queue, evry thing works normally, but after a time (about 5 minutes) my agent is pauses (agent is still regitred but can't takes calls), on Astrisk console i have the message : [Jun 20 11:55:12] NOTICE[8803]: chan_sip.c:2757 auto_congest: Auto-congesting SIP/anna-08215f68 -- SIP/anna-08215f68 is circuit-busy -- Nobody picked up in 8000 ms I think

Hello I just settup a realtime mysql table for sip_peers. All peers (friends) is autenticateing but when i want to initiate a call between them i got the following error. Someone have some ideea? Thank you. ---<Cut Here>--- pbx*CLI>console dial 1014 == Console is full duplex -- Executing [1014@default:1] Dial("OSS/dsp", "SIP/1014|40|t") in new stack

Greetings. I've plugged 3 analog lines on an ethernet cable in an Khomp card to receive it's incoming calls. Without any configuration, when I call those numbers the asterisk server automatically answer the call and play the default music. The problem is: I need to discern the lines and redirect each one to his respective extension. Since they doesn't got any Caller ID Service the

Are there any adapters that would allow me to connect asterisk to wifi or we are not there yet? I have Digium adapter S101i that was discontinued but similar device that would connect to wifi network and a cell phone would be handy. -- Joseph

Acrescentando o report do Dell, os equipamentos da Khomp s?o homologados pela Anatel - funcionamento normalmente nas implementa??es de Asterisk puro, FreePBX ou Elastix. Caso desejem mais informa??es sobre equipamentos da Khomp, consultem a CAM Tecnologia. A CAM Tecnologia atua com revenda ou venda direta da khomp para o cliente final. Contato: Rubens Duarte de Andrade Tel: (21) 3189-1050

Sauda??es. Como que se faz um conector RJ45 em uma ponta e RJ11 e outra. Pretendo conectar a linha de um ATA em uma placa Khomp KFXO IP. A ponta que tem o conector RJ45 est? crimpada com a sequencia 568B e vai ser conectada na placa Khomp, mas a ponta RJ11 eu n?o sei como deve ficar. Li alguns manuais na internet mas n?o entendi ao certo como tem que ser feito. -- Att.* *** Luis H. Forchesatto

Hi, I have three Iaxy devices (s101i) parts. Two of them seem to work fine. The third plays a loud repeating click sound when an analog phone is plugged in. I can provision all of them, and make calls to all of them. The clicking one will blink when a call is incoming, but no audio from the call can be heard on the handset, and the caller only hears silence. The same handset works on the

Is iaxtel down? Ive been getting this: May 21 19:23:42 NOTICE[29984]: chan_iax2.c:2782 auto_congest: Auto-congesting call due to slow response -- IAX2/Iaxtel-12 is circuit-busy -- Hungup 'IAX2/Iaxtel-12' is it down or am I doing something wrong?

Hi experts. Recently I've insalled a PCI Khomp Pane on my server and inserted 4 chips to make call with it. The calls are good and no issue was noticed but I got reports that when someone call the chips the call volume is uncommonly low for both sides and they deploy some failures on the audio, only when the call comes from outside. When an extension at the same network makes a call that goes

On Tue, Dec 23, 2014 at 6:34 PM, Rusty Newton <rnewton at digium.com> wrote: > On Tue, Dec 23, 2014 at 4:17 PM, Joseph <syscon780 at gmail.com> wrote: >> Are there any adapters that would allow me to connect asterisk to wifi or we >> are not there yet? >> I have Digium adapter S101i that was discontinued but similar device that >> would connect to wifi

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

How to configure Digium S101i adapter to work with "pickupexten *8" ? I have few Sipura adapters and "*8" work OK but my new Digium S101i refuses to cooperate. -- #Joseph

Is there anyway to control echo on Digium S101I adapter? -- #Joseph