similar to: beronet BN4S0

Hi, I have a Digium B410P 4-port BRI card. I installed misdn 1.1.3 with hfcmulti driver and misdnuser 1.1.3. I configured the card "correctly" as misdnportinfo reports: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- Port 2: TE-mode BRI S/T interface line (for

Hi all, I have a problem with my beronet card with 2 isdn. I think drivers and Asterisk are ok but the red led on the card always blinking. The card is connected with PBX. I post some conf: [root@gateway ~]# misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. ->

Hello. I have problems to integrate an isdn phone. I don't know why but the isdn phone rings only once and than it looses its connection to his base station. I can make a call from the isdn phone to an VoIP Phone inside my network but when i pick up the phone the isdn phone also crashes. misdn.conf: [ntport1] ports=5 context=isdn-telefon msns=* extensions.conf: exten =>

Hi, I am struggling to get plain Cologne chip cards to run in NT mode, runs nice in TE mode despite the error message: login as: root root at 192.168.2.22's password: Last login: Tue Sep 1 23:09:24 2009 from 192.168.2.50 Welcome to Elastix ---------------------------------------------------- misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1

Hello. Someone knows what cause 127 mean. The phone that i'm calling rings once and than the connection interrupts: P[ 5] --> l3id:10040 P[ 5] --> cause:127 P[ 5] --> out_cause:127 P[ 5] --> state:ALERTING P[ 5] --> Channel: mISDN/5-1 hanguped new state:CLEANING P[ 5] $$$ CLEANUP CALLED pid:3 best regards -- Thomas Stein knowledgeTools? ....damit Sie sehen, was Sie

Hi, Since a week ago I am trying to get chan_misdn working with asterisk 1.4.19, using HFC based ISDN card on Linux 2.6.22. My setup is done as detailed on wiki and FAQ. * mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed. After installation and misdn-init, I have this: aragorn:root/pts/1: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) ->

I'm having trouble installing Beronet BN4S0 card. I have downloaded instructions from here http://www.beronet.com/download/card_installation_guide.pdf And when I download install-misdn-mqueue[1].tar.gz I untar it and execute "make" and "make install". This is the output that I get. [root@nbirma1 install-misdn-mqueue]# make install make -C app_bundle make[1]: Entering

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib: NEW_CR Ind with l3id:80001

Hi All, We've got msidn configured: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0

Hello. Is it possible to "mix" musiconhold music and playback voices? What i want to do is something like this: A person calls a number, gets a playback voice while in background music is playing. The configuration i use at the moment don't do what i want. Someone knows how to do it? Thanks in advance. exten => 18,1,Answer exten => 18,n,Background() exten =>

Hello. Is it possible to change the defined moh sound file within an extension? I have: exten => 18,1,Answer exten => 18,n,Wait(3) exten => 18,n,SetMusicOnHold(durchwahl) exten => 18,n,Dial(SIP/118,15,m) exten => 18,n,Hangup Now i have the situation someone calls and my phone is ringing while moh (durchwahl) is playing. When i pickup the call and press the hold button during

Hi. Asterisk 1.4.12.1. I get a lot of message like this. Someone knows what this message mean? Do i have to worry about it? [Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on channel 'Local/152 at local-f137,1' not posted [Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on channel 'Agent/152' not posted [Nov 7 15:24:25] NOTICE[31247]: cdr.c:434

Hello. I have a problem recieving fax without a callerid. Somehow the script i'm using fails and i don't know how to fix it. Does anyone have an idea how to solve this? Here an example of a working fax transmission: >fax2mail v2.0 > Triggered on Tuesday, May 29 2007, at 10:38 AM > $1 = CallerID number of fax sender = 02365207150 > $2 = CallerID name of fax sender = >

Good Evening, The company I work for is attempting to connect an Cisco ISDN Router to an OpenVOX B200P BRI Card so that we can get it to dial out across an existing ISDN PRI Line also installed in the Asterisk PBX Everything has compiled successfully and the BRI card has been detected when mISDN is started: # misdnportinfo Port 1: NT-mode BRI S/T interface port (for phones) -> Interface

Hi, I'm trying to get Asterisk working with the AVM B1 card. I've tried every instruction set I can find, but to no avail. I think I'm getting mixed up as to what Zaptel/CAPI configuration to use. If someone is currently using one of these cards, would it be possible to mail me a few bits of the important config files? Sorry if I should have included something else too, but let me

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

Hello List, because this is my first post to this list, i'd like to introduce myself. My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in germany. Okay, now to the reason for this posting: I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686) with AVM ISDN Fritz PCI card (passive). I followed the configuration on http://voip-info.org and the

Hi, I'm currently trying to get a BN4S0e (which is basically a BN4S0 with a PCIe connector) working with dahdi. The module is loading properly but the card is not detected by the module. Is support on dahdi planned for this card ? In the meantime i'm gonna use mISDN with this card. Thanks Laurent

O.K. thanks a lot, Felix and Peer Oliver. But somehow asterisk keeps telling me while startup: [chan_capi.so] => (Common ISDN API for Asterisk) Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr1 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr2 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr3 Jan 24 14:30:47