similar to: Tesco Internet Phone

I have something going on that I don't fully understand after a weekend of looking for answers. I have an iax account with Tesco that works flawlessly with the Zoiper client - but is giving me trouble with inbound calls in Asterisk 1.6. After some playing I have ended up with an iax.conf file that looks like this: [general] calltokenoptional = 77.75.0.0/255.255.248.0 maxcallnumbers = 16382

Hi all, Does anybody know any USB phone that I can use as an IAX Client? Thanks. Ronaldo.

Okay, I've read as much as I can, and I think i've followed instructions, but I'm still having problems with * and firefly... I can get outgoing to other freshtel working, but not incoming (I get the "not available" voicemail), or outgoing to landline. I'm using the debian asterisk package (0.9.1-RC1-4) My iax.conf has in general (under my FWD register, which

Hi We are facing some issue While joining samba server to AD We have ClearCase VOB server on AIX 5.3 with TL 12 and SAMBA version 3.5.0 installed on Aix server. The AD server is Windows 2008 R2. We are unable to Join Samba server to AD . Command: net ads join createcomputer=<OU> -U <username> Please find the details smb.conf. Please advice on resolving this issue is highly

I have a Sipura SPA2000 2 line SIP FXS box with line 1 on port 5060 and line 2 on 5061. The SPA2000 is on IP address 192.168.17.6, and the asterisk box is on 102.168.17.2. Both SPA2000 ports(5060 and 5061) share the same IP address. Every minute I repeatedly get the following output: SIP Debugging Enabled 10 headers, 0 lines Reliably Transmitting: OPTIONS sip:192.168.17.6 SIP/2.0 Via:

I have been looking around for examples or code on making a click to call application for web sites... has anybody had any luck on this topic? Is there any open source code out ther that could do this? Regards AK

Hi My head hurts... Can anyone help out here, my remote IAX can see my local IAX and visa versa, conversation starts, I can dial my remote (POTS) landline number, remote end answers, trys to route to local iax2, I see it start the conversation here, the extension (SIP) rings once and then it dies... Both ends are defined with accept IPADDRESS to keep it in the family and simple.. Debug info

All, If you currently own a Sipura SPA2000, avoid going to the sipura website and upgrading the firmware. I upgraded my SPA2k a couple of days ago from 1.0.9 (what it came with) to 1.0.18 off the site, and I am having issues with my SPA rebooting itself every 3-10 minutes for no apparent reason. I have been in touch with the *excellent* sipura support folks, and they are working with me to

Hi, all I am trying to figure out how to forward incoming PSTN call on SPA3000 to VoIP extension(s). Basically, I have converted my home to VoIP. I have normal phone (connected to SPA3000) and couple of IP phones. All call coming from VoIP DID do ring all phones (analogue via SPA3000 and IP ones). Now I need to do same thing for incoming PSTN calls. I have enabled gateway function in SPA3000 and

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

I found version 2.0.0 of Firefly on the Freshtel site, but it only has the network setup options for the Freshtel network, despite the final statement on the page http://www.freshtel.net/firefly/download/ that says: ----------------- Standalone SIP / IAX mode: If you want to use Firefly on our network (with your own voicemail etc.) you will need to register a Firefly number. However, you can

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout

More an echo algorithm question than a purely asterisk one... I have the following setup: Handset - PAP2 - Asterisk - SPA3000 - Telco And no matter what I do, I get echo on a call routed out via the PSTN when I talk into the handset, in the order of a hundred ms (my estimate, could be wildly inaccurate!). Echo will occur also when I have a handset plugged into the phone port on the SPA3000

Hi, I'm having some problems getting calls to go out via freshtel. There dosn't seem to be any specific information on how to get it working anywhere. The only information I've found is here: http://www.voip-info.org/wiki-Freshtel and that dosn't give you any idea of how to actually get it working. I've tried adapting information from other IAX2 provider examples but have

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

Hi I have just got Asterisk going with an spa-2000. however when I look through the userpdf every function on the sipura and asterisk seems to require on-hook or flash button , all of the phones i have do net seem to have either, is there a way round this ? does anyone know. Or do i ahve to go out and buy more phones? Anyhelp appreciated Simon

I have the following models class Recipe < ActiveRecord::Base has_many :ingredient_recipes has_many :ingredients, :through => :ingredient_recipes end class IngredientRecipe < ActiveRecord::Base belongs_to :ingredient belongs_to :recipe end class Ingredient < ActiveRecord::Base has_many :ingredient_recipes has_many :recipes, :through => :ingredient_recipes