similar to: Polycom IP 601 help needed

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

For the last few months we have intermittently been experiencing some very strange registration problems with certain polycom phones. Here is some background information: I have about 150 Polycom Soundpoint IP 600s, 601s, and 650s spread between 8 servers at different locations. Each phone is on the same network (and subnet) as the server it connects to. There is no NAT or anything else strange

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

I was hoping that someone may be able to shed some light on some issues I'm having on trying to get an Asterisk test server up and running. At the moment I have the basics, two Polycom hard phones (301 & 601 with expansion unit (which oddly will not power up)) that can call each other, log into voicemail (one touch) and have custom directories & buddy lists. Unfortunately some of the

I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network. I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from

Hi, I've been meaning to fix my non-working paging feature here for a while, and I've just spent the last 5 hours looking at many, many web pages that all say the same thing. I am using Asterisk 1.6.2.18 and Polycom phones, both older (501 with "latest" legacy 3.1.7 firmware) and newer (335 and 650 with latest 3.3.1f). I have changed the correct values in sip.cfg like

Hi Guys This has been discussed a little in the list before so my apologies for sendig it again but I have done what others have done in the list but to no avail. I have configured Asterisk to send the callerID of extension phones as "firstname lastname" and that seems to work well and extensions show calls originating on other extensions in this format. I set the following in

JR Richardson Engineering for the Masses> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of asterisk-users- > request at lists.digium.com > Sent: Saturday, March 01, 2008 12:00 PM > To: asterisk-users at lists.digium.com > Subject: asterisk-users Digest, Vol 44, Issue 1 > >

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

Hi All, I have a pretty standard Asterisk PBX setup with 60 SIP Peers, mostly Polycom 501's and a receptionist phone, Polycom IP 601 with 3 attached sidecars and Buddy Watch enabled monitoring all other SIP phones. The problem occurs when a group (all SIP peers) Page is called. Not always but sometimes when the Page is executed, the IP 601 will become unreachable from Asterisk. So when the

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

Hi, I found your post on http://threebit.net/mail-archive/asterisk-users/msg04580.html I am having the exact same issue with the Polycom IP601 (SIP version 1.6.6.0036) with Asterisk 1.2.7.1. I was wondering if you found any solution to it. I would really appreciate if you could share your solution. Thanks, Khairul. BELOW, THIS WAS YOUR POST Polycom IP 601 Buddy Watch problems

I'm hearing an echo when using a headset with my IP 501 / 601. The phones are using BR 3.1.2 and SIP 1.6.3. I use tftp to configure the phones. The sip.cfg is the default from polycom except for the parameters required to connect the phones to asterisk. I have absolutly no echo with the handset, but do have a slight echo on the speaker phone. I haven't ruled out room acoustics as the

Hi all, My company has pretty much standardized on Polycom phones and I am in the beginning phase of writing a GUI for administering/managing polycom provisioning at multiple sites which we intend to release as OS. I've started studying the docs and I'm having trouble understanding the following xml attribute: voIpProt.SIP.requestValidation.x.request.y.event I understand what it

Hi, I configured Buddy Watch function on my Polycom IP 601. It works well, until I make a reload of Asterisk. After reload, if I give the "show hints" command in Asterisk's CLI, it says that there are no watcher for the extensions that I configured. Before the reload in the CLI appears: -= Registered Asterisk Dial Plan Hints =- 3002 : SIP/3002 State:

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

Hello, I got 3 Polycom 300 phones, and upgraded to the latest firmware provided by the reseller. This is my first experience with Polycom and I cannot make them register in my Asterisk Box. I followed every advice I found (including separating [user] and [peer] in sip.conf. Using ethereal, I found that it tries to SUBSCRIBE to the asterisk box and it receives a 403 FORBIDDEN message. I

Hi, I configured Buddy Watch function on my Polycom IP 601. It works well, until I make a reload of Asterisk. After reload, It can't monitor any lines and I have to restart the phone to reactivate this function. Is this a specific problem of asterisk-1.2.3? How can I solve it? Thank in advance, regards, Marco.