similar to: Cisco 7941/7961 w/Firmware 8.2.1 and NAT

Anyone aware of how to configure one call per line on a Cisco 7941/7961? The default behaviour is to have two calls per line button, and this is confusing for some of my users so I'd like to be able to have the 2nd call ring the second line button, rather than being shared with the first. I'm hoping this is something that is configurable in the XML or on the phone UI. Thanks Gary

I found on the web that there is way to customize the softkeys for the 7941/7961 phones. In the SEP<mac>.xml there is a section called "softKeyFile" where you can specify an xml file for the softkeys. I couldn't find any examples of this softkey file or the format to this file. Does anyone have a call manager enviroment where they can look at this file and send me an

Hello, I have been running SIP41.8-2-2SR4S firmware on the Cisco 7961 and have recently upgraded to SIP41.8-3-2SR1S to add the DND button on the front of the phone and also to hopefully resolve some issues with the phones not registering after a long period. Once we upgraded the phones now display "Error Verifying Config Info" in the Status messages and will not process the

Hi, Has anyone met any success, installing localized (ie non-english) menus within SIP firmware enabled Cisco 7941 ? Those phones seem to be trying to download localized menus from Cisco Call Manager but as they are managed by an Asterisk server, I'm looking for a workaround. Any advice ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, Found out Cisco has some newer firmware available for the 7970 series of phones. New sip images are at version level 8.2 (instead of 8.0.2,8.0.3,8.0.4), posted Dec 10, 2006. This major jump in version numbers has fixed a few bugs (time zone not updating properly), but hasn't figured what some would consider to be showstoppers (registration not fully working, and mwi still not

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hi, My apologies for the OT. My googling came up empty and hopefully there are some members in the community that could give me a hint how to solve this issue: Cisco 7961 with SIP firmware 8.3.3. Needed to downgrade it to 8.0.4SRS2. The downgrade process started off good. The 7961 got it's IP address via DHCP, found it's SEP<mac>.cnf.xml file and started to "upgrade"

Hello List, Does anyone have access to the soft key configuration files for the Cisco 7911/7941/7970/7971 phones? Checked up on the Cisco site and didn't find much up there. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part

Hello, I have been working on getting a Cisco 7961G to place calls on my * server for a while now with no luck. I can receive calls just fine but I get a fast busy when I try to place calls. I have googled and been to many different sites but the solution has not been found. Anyone out there had a similar issue and found the fix? Asterisk server is 1.4.26 Cisco 7961G is running SIP version

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

Hi. I'm trying to develop a module that emulates the Cisco Extension Mobility feature from CallManager (the ability to log in to a phone and temporarily acquire the extension, soft key programming, and all other settings for that user profile) with Asterisk 1.4 and Cisco 79xx phones (some with SIP and some with SCCP, as the 7914 extension module does not support SIP). I've almost

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Does anyone have a solution for remotely getting the newer cisco phones (7941, 7961, 7970, etc ) to reread their configs (or even rebooting). I am running SIP firmware connected to asterisk. Check-sync doesn't seem to work anymore, I can't login to the phones as root because I am given a "challenge: <random digits>password:" prompt. occasionally I need to make changes to

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release

Hi, just wondered if it was the same firmware on both devices? thanks Mike

I'm trying to buy the cisco firmware update but it seems that i cannot order online because I bought my 7970 on ebay. Is there any other chance to get this update? ... anyone can make me a favour and send it to me by email? thank you