similar to: Problems with GXP2000 and Asterisk => Call pickup and Voicemail

1. We just dial the extension directly and have speed dials setup for the first 6 parked positions. We don't use *8 at all. 2. Change the config on the phones under Account to "Send DTMF via RTP (RFC2833)" -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Noc Phibee Sent: Thursday, February 08,

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi list, For months everything worked super here in our setup. This week I implemented some new idea in our webbased calendar system. I thought it would be nice to have an option that tells asterisk you are not available for calls during an appointment. For this to work I could no longer use the ringgroup setup: Dial(SIP/10&SIP/11&SIP/12,40,tr) So I thought, why not use the Local channel

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

I am having trouble getting park to work with SIP, I have these config files: /etc/asterisk/parking.conf [general] parkext => 8540 parkpos => 8541-8555 context => parkedcalls parkingtime => 45 /etc/asterisk/extensions.conf include => parkedcalls include => default [default] exten => 3874,1,Dial(SIP/3874|20|tT) Do I need something else somewhere? Is anyone using park and

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]:

Hello, Recently we have been using asterisk 1.6 and everything worked ok, all our productions server are 1.6. Recently we have upgraded one to 1.8 and multiple parking call are not working, which worked pretty ok on asterisk 1.6. Are there any major changes in asterisk 1.8 related to park call and multiple parking lots. Bellow is my config from asterisk 1.6 which worked, I`ve tried this in 1.8

I have problems using the call pickup under Asterisk 1.8.4.2. I have another Asterisk with 1.6 - and it is working fine with the same settings. I have setup the same callgroup and pickupgroup for all extensions in sip.conf - just to make things simple for testing. The sequence *8 seems to be completely ignored by Asterisk - the client shows "Call answered" when dialing *8 while the

I can not make a "call pickup" to work with Sipura-3000. I have one SIP phone and one is connected to ATA Sipura-3000 I've in all sip.conf context callgroup=1 pickupgroup=1 in features.conf I've tired: pickupexten = *88 pickupexten = *8 Nothing works. What am I missing? -- #Joseph

Hi list, This wll be my first post, so I want to thank all the developers for the great product they have created. Now, the question, I have installed asterisk 1.05 on debian sarge (binary package) with an I4l modem and 4 x-lite softphone and 2 SIP hardphones (Yuxin 100) This all works fine, exept for som echo on the ISDN channel, but I'll replace the I4L card with an AVM-C4 card next

Has anyone managed to get multi-parking lot call parking working correctly? I've had several attempts at it, and never seem to be able to get it to go properly - (actually, at all): I've most recently done this with 1.6.1.x, and now 1.6.2.x, with no luck in either case. What I've been "trying" is the following: features.conf [general] parkext => 100 [featuremap]

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820

Hi! I tried to use Parking Calls I use Asterisk 13, but I can't park any calls and it returns me [Feb 3 16:56:11] WARNING[1693]: pbx.c:12543 ast_context_verify_includes: Context 'ramais' tries to include nonexistent context 'parkedcalls' What is the correct code for put in extensions.conf? Can be this example below? [parkedcalls] exten => 700,1,ParkedCall(701) exten

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Hi! I'm trying to transfer a incomming call from a Queue to another extension. I'm receiving a call from a queue with the AgentCallbackLogin. The queu is as following: Queue(sales|t) Which should allow transfers. So as soon as the call is answered I would like to be able to transfer it When the agent presses the # I get the dialtone but as soon as I press any digit Asterisk tells me

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

I have an issue with call parking and hope there is some undocumented feature for this. ;-) We are replacing our legacy PBX with asterisk, but to save money over time (handsets and network), I am trying to maintain the use of our legacy PBX. Asterisk extensions can not use the call parking features (not usable over trunk cards) of the old PBX, so I have to get the old PBX to use asterisk's.