similar to: Best way to connect analog modem

i ry to use this http://www.eulerian.com/en/opensource/datepicker-prototype-scriptaculous i included scriptacolous,prototype and datepicker.js in the main file hen i load this data via ajax request $o .= " <input value=\"".$rs->fdatum_faelligkeit."\" ID=\"fdatum_faelligkeit\" name=\"fdatum_faelligkeit\" type=\"text\"

Hello List. I''m new here, and am staring off with a pretty common question, i think. I want to have my router DNAT incomeing connections for other IP''s than it''s WAN IP. In my other setup, just adding that IP as Destination Address was enough. But that was a bit older Version of Shorwall. In my new Setup, Shorewall 2.0.7 Debian Sarge, i have this line: DNAT

Hello, we would like to hook up analog modems behind an Asterisk server, and we're very interested in the experiences that others have made when attempting that. We assume that there are no inherent problems with modems in respect to the Asterisk software, but it appears that the FXO/FXS hardware restricts this kind of a setup to lower data transmission rates, is this correct? Currently,

I am playing with a USR (us robotics) USB modem model 5637. in the past I used internal modems and had no issues. One this unit I plugged it in, dmesg says its recogized. I did "ln -s /dev/ttyACM0 /dev/ttyS4" this works. I then did "cu -l /dev/ttyS4" type "AT" and I get OK... looking good. When I "ATDT my number" I get a connection at 1200 baud (which I

Using icecast you can stream nsv (nullsoft video) with aac+ or mp3 audio. There is an activex based web client or winamp client... Its better than nothing! -----Original Message----- From: icecast-bounces@xiph.org [mailto:icecast-bounces@xiph.org] On Behalf Of Andrew V. Kuzik Sent: 18 November 2005 1:58 PM To: icecast@xiph.org Subject: Re: offtop [Icecast] WMV3/9 mms:// Hi! Of course here in

Rich Adamson <radamson@routers.com> wrote: > >> I have been investigating on this list and found that faxing is not >> reliable between Zaptel >> cards and that Digium does not support nor >> recommend fax over the TDMXXB interfaces. >> >> Is this true ? Will fax not be reliable enough for my customer ? > > True... the TDM card (or its drivers)

Hi! I?m have some problems deploying OPENLDAP+SAMBA+PAM+NSSWITCH. When I restart the server with those services, the DBUS service crash. And when I try disable DBUS service on system start Avahi crashs too. Someone here have this problem? There?s a BUG on CentOS 5? Maybe PAM not talking with LDAP on startup? I can send some logfile and my system-auth setup. Thanks for your attention. -- /\

Hello *, I try to establish a Asterisk-Server for internal and external usage. Perfect use case for a DMZ, or not? My configuration: I N T E R N E T | | | E | | X | | T |

How, exactly, does CentOS-6.3 with udev recognize an USB modem when it is plugged in. How is it indicated? What other configuration is required? I can find the modem in /sys/class/tty and I can get the attributes using udevadm but I do not see anything in ps that refers to the modem device. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne

Hello, I am currently trying to configure an Asterisk (current 1.4) box with a TDM410P and 2 FXS as well as 2FXO modules. An analog modem is directly connected to the TDM (port 4) which itself is directly connected to the PSTN (port 1). [V.34 Modem]-----[TDM on Ast. 1.4 TDM]---PSTN When I try to establish an analog modem connection with this setup, the modem is unable to connect to the remote

Hello, I'm searching for a router for our company. Does anybody has a suggestion for a router with a SIP Application Layer Gateway and good working QoS (Upstream AND Downstream). Regards Bastian

Hello to everybody, does anybody knows how to install Asterisk on a Linksys WRT54G(S)? I had read in the Wiki that it is possible. If somebody has a tip, this would help me very much. Regards Bastian

Hi all, I have one last windows programme to get working under wine before I can ditch my company's last windows pc, but so far I am stumped by it. The programme is supplied by our bank & is used to dial up to the bank, log into the network & do things like viewing statements, making bacs payments etc. The programme runs fine but when I try to connect to the bank I get an error

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -

I've tried this before, with no luck. I've got to try again this evening, and I'm looking for some help. Here's my configuration -- pretty simple, really. Asterisk box -> T100P -> TA750(20FXS/4FXO) -> phones and outgoing lines I have an analog modem (Ok, it's a TIVO) that I need to be able to dial out. Right now, I have the modem connected directly to an outgoing

Hi, maybe this has been asked before but I couldnt find a proper answer on the web or list. I want to use a analog V.92 modem to make outgoing (and possibly) incoming phone call through a standard analog phone line. I found on web it's easy been done via chan_modem.so module. But this seems removed from asterisk or buggy. So my questions are can I enable chan_modem.so to be built or

Has anyone used samba v2.0 to share pooled modems. I have a large pool of identical modems available as a single TCP service on a terminal server with Samba running under HP-UX 10.20 . Any ideas how to make this modems an accessible share for Windows 95 clients Reply to jcort@medisys.co.uk

Hello! I have installed Dovecot yesterday as a simple connection between a local mailbox and Novell Evolution. I have set up a POP3 service that I can succesfully connect to. I chose the Maildir structure but the whole box is empty. When I try "echo ?test? | mail -s ?test? user42" it doesn?t reach the mailbox. What can I do? I could also try the mbox format but Evolution has

The problem with using Voice Modems is that they fall into two categories: 1) Hardware Modems which only have half-duplex transmission of voice 2) Soft/Win/Lin modems which are proprietry and don't have asterisk drivers Please shoot down this recipe before I waste any time trying to acheive it: Rationalisation: ---------------- In Australia and I assume other places, there is no

On Nov 30, 2007 6:35 PM, Kingsly John <member+centos at kingsly.net> wrote: > > What you have isn't a "real" modem .. it's just a winmodem that is usable > under linux. "real" modems don't need drivers to work. > > 11/30 00:31:52 dem mdm_command: string 'AT+FCLASS=2.0' > 11/30 00:31:52 dem mdm_command: string 'ERROR' ->