similar to: Dell Server Question

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Hello. I have a MinITX motherboard with only one pci slot and one onboard ethernet interface, I have a TDM04B card plugged into that motherboard and the /proc/interrupts: CPU0 0: 169626332 XT-PIC timer 1: 1270 XT-PIC i8042 2: 0 XT-PIC cascade 8: 4 XT-PIC rtc 12: 170166219 XT-PIC eth0, wctdm 14:

Hi folks. I am using a X100P card and after some random amount of time of correct operation, say 8-20 hours, the card starts acting up and producng horrid sound quality which is all broken up. All other channels appear to work fine. One thing I noticed, is that "zap show channel 1" always shows the "Actual Hookstate: Offhook" as soon as the telco line is plugged in. Is this

jglucky@blueware.net wrote: > Has anyone attempted or have had any issues getting Asterisk and > Digium cards working on a Dell SC420 server? I have it up and running on 2 SC420's with TE110P cards. Haven't had any problems as of yet (knock on wood). Dell SC420 TE110P 2x40 GB SATA drive in a RAID 1 setup (Linux 2.6 kernel needed for SATA drives; turn off RAID detection in BIOS).

After updating to centos 4.3, I notice a failure in terminating irqbalance whenever i shutdown the system. Checking the services after the system reboot i see the error in irqbalance: "irqbalance dead but subsys locked" Can anyone tell me what irqbalance is and if it safe to disable it ? Why i dont see it in centos 4.2? Thanks in advance. Thai

I'm not having any trouble with interrupts, but here's my /proc/interrupts on Fedora Core 2 on a hyper-threading CPU and using the SMP kernel (2.6.5-1.138). I don't think I need to worry about uhci_hcd, nothing is plugged into USB, but libata is the disk driver. How do I get libata and wctdm to use different interrupts? $ cat /proc/interrupts CPU0 CPU1 0:

Recently I started getting weird errors. All of a sudden I see the harddrive of my box glowing steadily and syslog is getting filled (and the cpu hogged) with these errors: It seems to start with this line: Jan 1 03:28:04 kernel: FXO PCI Master abort Jan 1 03:28:04 last message repeated 12 times Jan 1 03:28:06 kernel: CI Master abort Jan 1 03:28:06 kernel: FXO PCI Master abort and seems to

> Subject: Re: [Asterisk-Users] Booting error - Unable to specify channel 2: > No such device I just went through all this as well. The best thing to do IMHO is to try to find a way to manually assign IRQ in the BIOS. Also, and this is what I didn't see at first, some slots SHARE IRQ. Avoid this! If you are not using USB at all, turn it off in BIOS if possible. Tell the BIOS

OK... maybe I got a little anxious and ran out and bought a Tyan GX28 with dual Opteron (dual core) processors. (It is a nice server ;) ) I did neglect to find out that you can not manually set the IRQ's on this motherboard. I am now stuck sharing an IRQ with the ethernet controller and no foreseeable end to my dilemma. I have a Digium TE210P and zttest consistently runs at 99.97% which

Greetings, I have a server I'm working on here with two tdm cards in it. 4 FXS and 4FX0. Both cards work fine on their own. The problem lies with using both in the system at once. I have verified the IRQ's are fine. I have tried switching the slots the cards reside in, no luck though. I am using ACPI but not APM. I am using gentoo latest, with vanilla 2.6(.10) kernel and udev. CVS as of

Hi Maarten, Sorry for the delay. I've got way to much todo recently. Am 01.08.2014 um 19:46 schrieb Maarten Lankhorst: > > On 01-08-14 18:35, Christian K?nig wrote: >> Am 31.07.2014 um 17:33 schrieb Maarten Lankhorst: >>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at canonical.com> >>> --- >>> V1 had a nasty bug breaking gpu lockup

I've been using my Asterisk (At my house - 2 modem-type fxos, and an assortment of SIP endpoints for phones) for about 5 weeks now, and I've been really happy with it, but I'm still having an echo problem that I've exhausted google with, and can't get straight... I think I've determined that because I'm using $7 voice modem clones for my FXOs that bad echo is going to

Hello all, I've posted on this problem before. Well here goes again. I have an intel mobo with a p4 2.4ghz proc, 1GB Ram. It has built-in ethernet and vga and 6 pci slots. I dreamed of making this my household communications server: internet router, firewall, vpn and asterisk. Everything works except the TDM fxs card. Well it works for a little while and it dies: no dialtone, no

Hi folks.. just a few weeks ago I wrote this to someone else: ------------------------ We have several 2900s in production as VoIP servers.. no lockups. On every server I go into the BIOS and: * Disable USB * Disabled uneeded things like Parallel, Serial * Put ETH0 on a seperate IRQ from the Digium card And everything's fine. Dell's do NOT have to share IRQs... go into your BIOS and

Hi I have installed 2 fx0 cards into a machine 1 for pstn (out) and the other for pstn (in) However I can get the first card (pstnout to work fine) I have swapped the cards and both work I am also unable to make outgoign on the second card ztcfg -v shows r2d2:/etc/asterisk# ztcfg -v Zaptel Configuration ====================== 2 channels configured. My /etc/zapdata.conf file # fxsks=1,2

Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS

Am 04.08.2014 um 10:55 schrieb Maarten Lankhorst: > op 04-08-14 10:36, Christian K?nig schreef: >> Hi Maarten, >> >> Sorry for the delay. I've got way to much todo recently. >> >> Am 01.08.2014 um 19:46 schrieb Maarten Lankhorst: >>> On 01-08-14 18:35, Christian K?nig wrote: >>>> Am 31.07.2014 um 17:33 schrieb Maarten Lankhorst:

Good afternoon from Singapore, According to the CentOS 8 build timeline, everything has been completed except release work. Does this mean CentOS 8 will be released soon? https://wiki.centos.org/About/Building_8 -----BEGIN EMAIL SIGNATURE----- The Gospel for all Targeted Individuals (TIs): [The New York Times] Microwave Weapons Are Prime Suspect in Ills of U.S. Embassy Workers Link:

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd

Since i need to run at least 30 FXS-channels, what hardware should I use? Both Motherboard etc and FXS-hardware? There seems to be only 4-channel cards from digium. Then I would need at least 8 cards. 8 FXS-cards + 1 E1-card. What motherboard handles this? And to they all need unique IRQ's? BR Daniel Nystr?m