similar to: Snom 320 echo

A client of mine has a Snom 320. Usually when he comes in each morning, it is asking him for a password. A power cycle brings it back to normal operation. How do I troubleshoot this further? --Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070221/0e4d3ab8/attachment.htm

I don't know everything that's going on as someone else has been working on the project, but it hasn't really been going anywhere, so I had some questions. We've got some Snom 320s with Asterisk 1.2.9.1 (I believe). All was well (with a previous release), but the phones started to get real choppy. We are also running a softphone at this location and it was fine. The SIP qualify

I have a client that has 5 Snom 320s. 4 work great, one does not. I upgrade the firmware to the latest (6.5.2) and the problem goes away, but then comes back a couple days later. There is a slight packet loss on the phone (about 1%), though there is no packet loss on any of the other phones. I determine the packet loss by the Linux command "ping -f -c 10000 192.168.2.10". Outgoing

I need to setup a small mail server on a local network. It only needs SMTP ability as it's just so Asterisk can send out emails. The machine has sendmail installed. My primary mail server seems to be rejecting the messages. Some research says something isn't configured properly. What do I have to do so the outside world accepts emails from my Asterisk box? It is behind a NAT.

Hello. I've been going through the archives, but can't discern the state or future direction of IAX on the SNOM100. The most recent image appears to be from September 2002. There was a message on this list stating that SNOM was coming to visit Digium last April with the intention of adding IAX support themselves. For a while there was reference to the I100E on the asterisk and/or

My provider has a Coppercom switch. I have included the authentication information they gave me. How would I structure this in Asterisk to the registration and the entry in sip.conf? User Name - 8159093010 Password - XXXXX No Pin Proxy - sip.essex1.com (10.1.3.2) Outbound Proxy - proxy.essex1.com (63.164.210.14) Change setting to use "outbound Proxy" ---------- Mike Hammett

I have a whack of Snom 360's. Occasionally, *some* of them, prompt the user, on the screen, for the registration password. You enter it, everything's OK. Next day, same thing. This is like on 5 or 6 phones out of a lot of 120. It's *always* the same phones. I haven't drilled down to things like firmware rev yet, since I ordered them all as one lot, but I'm wondering if anyone

The USB core was completely rewritten in 2.6, and as such the functions that ztdummy depends on do not exist in 2.6. I get the feeling that these changes are too much to easily fix ztdummy, so I don't expect to see it working on 2.6 any time soon (if ever) I made some small changes to zaprtc to work on 2.6 and I have MoH and Meetme functions working fine in my lab. For production I would

My provider migrated from an old EOL softswitch to Trixbox. I have a number (8159093011) on a different server on a different network. It appears as though the incoming calls are trying to authenticate against that number, which isn't present on the box. Could someone help me decode this debugging output? I was calling 8159911010. My server is 208.100.1.33. Theirs is 208.1.87.235. I

Some of you might already know that we are releasing a new phone, snom 360. To make the phone well-known and stable, we have made a soft phone version out of it and offer it for trial or private use for free (for more details, see the license conditions). There are only few limitations to the phone. First of all, the audio subsystem will work only work with an acceptable quality if you are using

I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070905/c62f4465/attachment.htm

What you can still to is setting the port on the phone to port 5060 - just as a little dirty workaround until there is a better solution available. CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] Im Auftrag von Jason White Gesendet: Montag, 29. Oktober 2007 10:01 An: Asterisk Users Mailing List -

I have multiple upstreams in my office. The primary upstream is having some issues with latency\jitter. I want to move the VoIP traffic to another interface. I have the router set to send all traffic destined for "local" networks out the respective interfaces. Traffic destined to the Internet goes out one of the upstreams. I can do this on a per-IP basis and have successfully done

Hi folks, in order to establish backward compatibility we made an image that automatically detects if the other side does not support RFC3264. Please try it out, we would be very interested if this image is a progress! http://snom.com/download/share/snom200-2.03b-SIP.bin Thanks, CS

This is a bit off topic, because I 'think' it isn't an Asterisk problem. However I'm not sure and anyhow I'm hoping someone may recognize the symptom. We moved offices a month ago. Our trusty SNOM190s (all between 3 and 5 years old) were packed up for the move, then unpacked a couple of weeks later. On unpacking them and connecting them to the new network, several of

Hi, Watching Snom 870's video (http://www.youtube.com/watch?v=9e8hPxX0oDU), you can see a new sidecar (phone extension) which seem very interesting. Has someone details on this extension ? Any release date or/and data sheet ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

that is *very* cool. However, I am somewhat concerned about being forced to license the firmware (even if it is free) can you comment for the list the rationale behind forcing a license and how this might affect Snom users who, say, want to DOWN grade their firmware? ps is there a timetable for supported, formally released firmware version? -----Original Message----- From: Hirosh Dabui

In all the information on Asterisk it takes about TDMoE to link asterisk servers together. Is this IAX??? How would I use TDMoE. Maybe my first question should be, What is it??? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030516/cd74bddb/attachment.htm

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to