I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060123/63388145/attachment.htm
Mike Hammett wrote:> I thought I read somewhere that you no longer have to do a special > make command for the 2.6 kernel. Is this true, or should I still make > linux26? I'm having problems getting anything zaptel to load properly. >I've found that doing a make causes it to do a make linux26 if the kernel is detected. I still do it out of habbit. Doug
Hi Mike, You must continue - for zaptel only - to "make linux26", as it is described in the companion file "README.Linux26" in the Zaptel folder (/usr/src/zaptel....). Read the text from this file, as suggested in its title : To build for Linux 2.6, first you must be sure that you have a symlink to your linux-2.6 sources in /usr/src/linux-2.6. The 2.6 kernel no longer needs the full sourcecode to build against it. You can create the symlink to /lib/modules/`uname -r`/build/ and then you can type: # make linux26 # make install Note that you will also need CRC-CCITT functions compiled with your kernel or as a kernel module. These can be selected from the "Library Routines" submenu during kernel configuration via "make menuconfig" It is a good habit to read all this "README..." files before to do something, as it is important to read any user manual for any sofisticated equipment ;-) Good luck ! Best Regards, Francois BERGERET, France. -----Message d'origine----- De : asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] De la part de Mike Hammett Envoy? : lundi 23 janvier 2006 22:10 ? : asterisk-users@lists.digium.com Objet : [Asterisk-Users] make linux26 I thought I read somewhere that you no longer have to do a special make command for the 2.6 kernel. Is this true, or should I still make linux26? I'm having problems getting anything zaptel to load properly. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060123/9b097a35/attachment.htm
Yeah, that's where I saw contradicting what I saw elsewhere. ---- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Monday, January 23, 2006 3:48 PM Subject: Asterisk-Users Digest, Vol 18, Issue 141> Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users > or, via email, send a message with subject or body 'help' to > asterisk-users-request@lists.digium.com > > You can reach the person managing the list at > asterisk-users-owner@lists.digium.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Asterisk-Users digest..." > > > ------------------------------ > > Message: 23 > Date: Mon, 23 Jan 2006 22:37:55 +0100 > From: <f6hqz-m@hamwlan.net> > Subject: RE : [Asterisk-Users] make linux26 > To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > <asterisk-users@lists.digium.com> > Message-ID: > <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARuRp1ly/OEScRq8g2NJOvuKCAAAQAAAAgrSplcD8C0maxcAJVGAJLgEAAAAA@hamwlan.net> > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Mike, > > You must continue - for zaptel only - to "make linux26", as it is > described > in the companion file "README.Linux26" in the Zaptel folder > (/usr/src/zaptel....). > Read the text from this file, as suggested in its title : > > To build for Linux 2.6, first you must be sure that you have a > symlink to your linux-2.6 sources in /usr/src/linux-2.6. The 2.6 > kernel no longer needs the full sourcecode to build against it. You > can create the symlink to /lib/modules/`uname -r`/build/ and then > you can type: > > # make linux26 > # make install > > Note that you will also need CRC-CCITT functions compiled > with your kernel or as a kernel module. These can be > selected from the "Library Routines" submenu during kernel > configuration via "make menuconfig" > > It is a good habit to read all this "README..." files before to do > something, as it is important to read any user manual for any sofisticated > equipment ;-) > > Good luck ! > > Best Regards, > Francois BERGERET, > France. > > > -----Message d'origine----- > De : asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] De la part de Mike > Hammett > Envoy? : lundi 23 janvier 2006 22:10 > ? : asterisk-users@lists.digium.com > Objet : [Asterisk-Users] make linux26 > > > I thought I read somewhere that you no longer have to do a special make > command for the 2.6 kernel. Is this true, or should I still make linux26? > I'm having problems getting anything zaptel to load properly. > > > ---- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://lists.digium.com/pipermail/asterisk-users/attachments/20060123/9b097a35/attachment-0001.htm >
Same here. I followed the suggestions in README.udev compiled with make linux26 and no trouble either. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Facundo Ameal Sent: dinsdag 24 januari 2006 2:37 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: RE : [Asterisk-Users] make linux26 i compiled it with make linux26 and had no trouble. try it like that. 2006/1/23, Mike Hammett <asterisk-users@ics-il.net>:> Yeah, that's where I saw contradicting what I saw elsewhere. > > > ---- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > ----- Original Message ----- > From: <asterisk-users-request@lists.digium.com> > To: <asterisk-users@lists.digium.com> > Sent: Monday, January 23, 2006 3:48 PM > Subject: Asterisk-Users Digest, Vol 18, Issue 141 > > > > Send Asterisk-Users mailing list submissions to > > asterisk-users@lists.digium.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.digium.com/mailman/listinfo/asterisk-users > > or, via email, send a message with subject or body 'help' to > > asterisk-users-request@lists.digium.com > > > > You can reach the person managing the list at > > asterisk-users-owner@lists.digium.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Asterisk-Users digest..." > > > > > > ------------------------------ > > > > Message: 23 > > Date: Mon, 23 Jan 2006 22:37:55 +0100 > > From: <f6hqz-m@hamwlan.net> > > Subject: RE : [Asterisk-Users] make linux26 > > To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > > <asterisk-users@lists.digium.com> > > Message-ID: > > <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARuRp1ly/OEScRq8g2NJO > > vuKCAAAQAAAAgrSplcD8C0maxcAJVGAJLgEAAAAA@hamwlan.net> > > > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hi Mike, > > > > You must continue - for zaptel only - to "make linux26", as it is > > described in the companion file "README.Linux26" in the Zaptel > > folder (/usr/src/zaptel....). > > Read the text from this file, as suggested in its title : > > > > To build for Linux 2.6, first you must be sure that you have a > > symlink to your linux-2.6 sources in /usr/src/linux-2.6. The 2.6 > > kernel no longer needs the full sourcecode to build against it. You > > can create the symlink to /lib/modules/`uname -r`/build/ and then > > you can type: > > > > # make linux26 > > # make install > > > > Note that you will also need CRC-CCITT functions compiled with your > > kernel or as a kernel module. These can be selected from the > > "Library Routines" submenu during kernel configuration via "make > > menuconfig" > > > > It is a good habit to read all this "README..." files before to do > > something, as it is important to read any user manual for any > > sofisticated equipment ;-) > > > > Good luck ! > > > > Best Regards, > > Francois BERGERET, > > France. > > > > > > -----Message d'origine----- > > De : asterisk-users-bounces@lists.digium.com > > [mailto:asterisk-users-bounces@lists.digium.com] De la part de Mike > > Hammett Envoy? : lundi 23 janvier 2006 22:10 ? : > > asterisk-users@lists.digium.com Objet : [Asterisk-Users] make > > linux26 > > > > > > I thought I read somewhere that you no longer have to do a special > > make command for the 2.6 kernel. Is this true, or should I still makelinux26?> > I'm having problems getting anything zaptel to load properly. > > > > > > ---- > > Mike Hammett > > Intelligent Computing Solutions > > http://www.ics-il.com > > > > > > > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: > > http://lists.digium.com/pipermail/asterisk-users/attachments/2006012 > > 3/9b097a35/attachment-0001.htm > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Open your mind, use open source. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users