similar to: Nat Question

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

Hello, I have a TDM400P with 4 FXO ports, currently using three. When sending or receiving calls on this card, there is a nearly constant popping/clicking sound, it is related to the echo cancellation?. I adjusted my gains properly, but to no avail. I even found that setting echotraining=no in zapata.conf didn't change the scenario at all. I've plugged analog handsets into the

Hello all, I post this issue thinking too that could help other people on an asterisk deployment over distributed offices considering both quality, prices, devices and so. Well, i am working on a deployment of a telephony system based in asterisk. My company have a central office with seven remote offices connected all through a VPN. To reduce and evaluate costs i consider solutions like:

Hello, I've tried to transfer a IAX call to a number configured on a traditional PBX, but it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk in the following way: IAX/SIP client --> Asterisk (FXO) --> (FXS) traditional PBX ---> OFFICE Phones Asterisk is connected to the PBX with an internal number configured inside it. In other words i keep an

Hey Guys, I'm curious if there's an interest in a free, CallerID database? For those of you in the same spot we are, our current provider only provides us with the CND, excluding CNAM. Would creating a public database, managed by users be worthwhile to anyone? Thanks - Any input is greatly appreciated. -- Robert Norton SophMedia LLC Operations Manager Cell: 480-234-4312 Office:

All, Has anyone seen INVAL messages on an IAX link before? I'm occasionally getting them from my Gateway provider, and I need to narrow down the potential cause. Symptoms are: Incoming calls fail, I see NEW, AUTHREQ then INVAL messages between the two A*k boxes... then for no reason at all it'll start working ok again.. My Asterisik: 1.2.10, Gateway A*k : 1.2.0

hello all, isit possible to do sth. so that if the sip-phone is in use and a call is incoming that the caller gets a busy signal? coz i wan to have the incoming party get a busy signal if i'm at phone. regards rene -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061120/6f438f28/attachment.htm

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

Can anyone tell me what might cause callers on hold in a queue to drop into agents voicemail boxes? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071217/ae6cba5a/attachment.htm

Hey Guys, Kind of an off the ball question, but I have a random idea. My voip provider supports caller id lookups, but charges a bit for each lookup. I'm thinking about writing a basic PHP script (through AGI) to cache these lookups for say 90 days. Is there an obvious problem with this? Thanks -- Robert Norton SophMedia LLC Operations Manager Cell: 480-234-4312 Office: 480-626-5449 (x300)

Hello, I am looking to purchase a new quad-band cellphone and I'm looking for one with WiFi and enough CPU power for stable SIP calls. I was wondering if anyone here can share his experience and recommend on a good cellphone. Any chance there is such a phone with even good WiFi profiles management or am I asking for too much now? :-) Thanks, Tomer.

Hello all! Does anyone have a good howto to setup Asterisk and Skype. Thanks Gustavo A. Gonz?lez Dto. de Infraestructura Despegar.com, Inc. ggonzalez at despegar.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080526/831b3824/attachment.htm

Hello! I need to send Faxes from an Asterisk box to an Asterisk + Iaxmodem + Hylafax installed on other box. I have setup IAX trunks between this boxes, all works fine but can?t send faxes from one to other, Im trying with or without NVFaxDetect application but does not work. Is there a way to get it working?. If I connect a fax machine directly to Asterisk with Iaxmodem and Hylafax, I have no

Hello! I?ve an issue whit CDR using asterisk 1.4.23.1. I?ve configured mysql to store cdr information, but, while I put into cdr_mysql.conf the field ?userfield=1? and doing a query I found that this field is empty in the cdr table. On the other hand I can?t find records in the cdr table that show me calls generated through AMI using Originate Action, that?s calls are not stored in the CDR, but I

How I change my configuration to reduce this issue. I have this setting on my zapata.conf signalling=fxs_ks group=1 callgroup=1 pickupgroup=1 channel=1 signalling=fxs_ks group=2 callgroup=1 pickupgroup=1 channel=2; singalling=fxs_ks group=3 callgroup=1 pickupgroup=1 channel=3; singalling=fxs_ks group=4 callgroup=1 pickupgroup=1 channel=4 and for outbound calls I have this context on my

Hi!. Is there any way to know which extension answered a call , when dialing from an AGI Script?? Thanks! Luciano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/22a585ea/attachment.htm

Hello I have a question about incoming calls on TDM400P cards. I want to know why an incoming call appear in a sorpresive way on a phone that I pickup to call out. I am using ChanIsAvailable to check those lines ( Zap channels )that are free. I have four lines connected to my TDM400P card and when I get a free Zap channel to call I hear the voice of a people on the other side from an incomming

Hi all! Im looking for 1ezphone to use as a web softphone but I?cant access to 1ezphone.com. Anyone knows what happened with this site?. Thanks! Gustavo A. Gonz?lez Dto. de Infraestructura Despegar.com, Inc. ggonzalez at despegar.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey Guys, I apologize for my ignorance on this one. I've got several 7960s running on Asterisk1.4 with 15 or separate queues and am trying to figure out a way to identify to the 7960s, what queue the incoming call is on? Is this possible at all? Thanks! -- Robert Norton SophMedia LLC Operations Manager Cell: 480-234-4312 Office: 480-626-5449 (x300) P.O. Box 7755 Tempe, AZ 85281