similar to: Realtime multiple registration for a Hard Phone Snom 360

I have a whack of Snom 360's. Occasionally, *some* of them, prompt the user, on the screen, for the registration password. You enter it, everything's OK. Next day, same thing. This is like on 5 or 6 phones out of a lot of 120. It's *always* the same phones. I haven't drilled down to things like firmware rev yet, since I ordered them all as one lot, but I'm wondering if anyone

I'm going to be rolling out asterisk at a small office and one requested feature was the ability to have a phone that can be configured so that ringtones can be configured according to the callerid of the caller. Does anyone have Asterisk experience with such a phone? Any suggestions would be greatly appreciated. Thanks in advance!!!

I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone" on my snom; I could not get it to work with

Hello. I'm currently evaluating the Sipura SPA-841, and snom 190 phones for use in an Asterisk PBX/call center environment. One feature the SPA-841 has, which I can't figure out how to implement on the snom 190, is the "make/accept calls without registration" feature. Or more specifically, "produce a dial tone even if I'm not registered." I would like to set our

What you can still to is setting the port on the phone to port 5060 - just as a little dirty workaround until there is a better solution available. CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] Im Auftrag von Jason White Gesendet: Montag, 29. Oktober 2007 10:01 An: Asterisk Users Mailing List -

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

Hello Mailinglist, i was reading a paper regarding a Asterisk clustering solution and they where pretty excited about a feature in polycom phones: You can add a registration to a primary asterisk server You can add a registration to a secondary asterisk server The polycom phones will talk to the primary server as long as all goes well, If they have a problem with an INVITE, they

-----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 Dear user, the new snom 360 is able to use services from standard web servers. Users can deploy customized client services with snom 360 and interact with other users via the keypad. The snom 360 will use HTTP protocol from standard web servers, like Apache. Typical services are: ~ 1. To-do lists ~ 2. Stock Information ~ 3. Weather ~ 4.

Hi to all, I got an Asterisk with 2 BRI(7 pstn numbers and 4 concurrent calls) and 15 SIP extensions. The receptionist has a SNOM-360. How many SIP accounts would you configure on that phone? Only one would be enough? One SIP account, has a limit on concurrent calls? I saw that the SNOM-360 can handle up to eleven SIP accounts. Thanks -- .:FaberK:.

Hi all, One of my users reports frequently hearing echo on her Snom 360 phone, even while talking to other Snom phones (via Asterisk) on the same LAN (i.e., all-digital low-latency connection). I can never reproduce it though, and swapping the phone didn't help. Has anyone else seen "mystery echo" on Snom phones? Any suggestions for debugging? On my own Snom 360, I sometimes

Dear friends, I am working around with a Snom 360 and Asterisk 1.4 + FreePBX In order to get subscriptions working and the Snom 360 lights turns on, I have set everything just like all the pages in the net explain. So, I get subsciption working. I can list subscription on the asterisk and if I use the SIP trace function built in at the SNOM nad see NOTIFY messages and 200 OK responses.

Hi, I'm trying my new Snom 360 phone (6.2 firmware) and I'm seeing that it doesn't register with the Asterisk 1.2.9.1 server after a reboot. I need to click "Re-register" in the web interface. I set: - Support broken Registrar: On - RTP Encryption: Off Any help? -- Domenico Viggiani

Hi guys. I just bought and configured a Snom 360 and have noticed that the LCD is constantly flickering at a rate of ~10-15Hz (that's a guess). Either way, it's very distracting. Has anyone else encountered this before? Any solutions? Cheers, -- Nick E: nick.hoffman@voxpak.com P: +61 7 5591 3588 F: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make

Greetings, Sounds like a simple thing to do, but I was not able to do it on these particular phones. Snom wiki was not helpful. My client wants to keep his phones pointed to UTC time, no DST, no change in timezone, i.e. to stay at 0 hours difference. The phones are provisioned from a tftp server. If I remove 'dst' value from the provisioning file, on bootup phones force users to pickup

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

Anyone noticed the snom 360 indications are incorrect for US zone? menu->preferences->tone scheme->usa indications.conf: [general] country=us extensions.conf: exten => 1111,1,Answer exten => 1111,n,Playtones(dial) exten => 1111,n,Wait(30) exten => 2222,1,Busy exten => 3333,1,Answer exten => 3333,n,Playtones(busy) exten => 3333,n,Wait(30) hit speakerphone on the

Several of my SIP users are in the habit of diverting all their calls to an assistant when they're out of the office. When these calls ring on the assistant's phone, she wants to be able to tell which number they've been forwarded from so that she can say "Joe Blow's phone" or whatever when she picks up the call. The assistant's phone is a snom 360, which normally

Does someone know coincidentally the cause for the error message specified in the Subject? The following scenario: Snom 360 behind one rout (wiederrum on a DSL line with static IP address hangs). The Snom has a private IP, routs accomplishes NAT. STUN and ICE are activated, as SIP haven 5060/udp are firmly used. Detailed packages passed on on haven 5060/udp of rout to the Snom. The telephone

Hi, This is a weird request, but does anyone have a Snom 360 monitoring extensions for BLF on several Asterisk servers accross a network? Alternatively, can anyone give me a pointer as to how to setup a Snom 360 to monitor an extension not on it's own server? My scenario is that I have a main site which will have its own server (for storage of call recording data etc because the remote

Hello, I have a customer who said that their Snom 360 is joining calls by accident. The situation is that they had one call on the line and another call came in. She pressed the hold button on the phone and the two calls were joined together. I do have "Call join on Xfer" set to yes, but I thought that would only come into play when doing a transfer, not putting someone on hold. The