similar to: asterisk run on vxworks for hardware pbx

Hi List, I need to modify the callerID name of the call coming back when a parked call returns to the extension that parked it when it times out. Looking at app_parkandannounce.c /* Now place the call to the extention */ snprintf(buf, sizeof(buf), "%d", lot); memset(&oh, 0, sizeof(oh)); oh.parent_channel = chan; oh.vars =

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

static void senddialevent(struct ast_channel *src, struct ast_channel *dst) { manager_event(EVENT_FLAG_CALL, "Dial", "Source: %s\r\n" "Destination: %s\r\n" "CallerID: %s\r\n" "CallerIDName: %s\r\n" "SrcUniqueID: %s\r\n" "DestUniqueID: %s\r\n" "CDRUserfield: %s\r\n", src->name,

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

Hello, How can I access caller's number with Asterisk CVS 1.0.12? In new version there are structure cid with field cid_num. And in 1.0.12 only callerid field which is equal to cid_name. I also tried to get it from chan->cdr->src but this is also the same as cid_name or callerid. Mindaugas Kezys -------------- next part -------------- An HTML attachment was

Hi! Maybe someone could help me out? When a call is routed via a2billing AGI and user does a transfer, the call is dropped. If the trunk is called directly everyhing works. Here's a direct scenario (working fine): [pbx000001] exten => 101,1,Set(__TRANSFER_CONTEXT=pbx000001) exten => 101,n,Dial(SIP/pozitel/37129238254,45,t) exten => 102,1,Dial(SIP/12345,60) so, when user calls ext

Hi, We are trying to use attended transfer with Asterisk 1.2.5, but when we do the transfer and dial the new number, it times out after 3 rings and then the callee is put back to the original agent. Where can I adjust the timeout which applies to the number we are transferring to? I have changed the extension for this number to timeout at 60 seconds, but that seems to make no difference. --

Hi, I have been experimenting with CEL in a trunk version of asterisk for some time and have upgraded my test machine to 1.8.0 today. Made a few calls and it looks like the eventtype field is missing in the CEL insert query when using ODBC. I see the following errors on the console: [Oct 22 21:46:09] WARNING[952]: res_odbc.c:634 ast_odbc_prepare_and_execute: SQL Execute returned an error -1:

Hi, I am a beginner in asterisk. Implementing it in my dept in India using TDM400b card with asterisk, zaptel, libpri version latest of CVS HEAD Callerid on my system is coming tough. Asterisk doesnot finishes the callerid spill and Cancells it. After going through code in Callerid.c and chan_zap.c I found that my line is providing caller id of length 8867. Flow enters in zt_call and

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

I'm having a wierd problem with a Cisco 7960 (sccp2) and asterisk (1.4.2) If the call that I'm trying to make goes through, everything works fine. But if there's any sort of error (like me messing around in my extensions.conf, etc). I can't get the connection to drop. ie: If I get the conjestion tone and hang up the phone, I can do a sccp show channels I can see that the

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hi, i managed to boot a VxWorks 6.5 Kernel on QEMU without kqemu acceleration. The bootloader and the precompiled Kernel, both belong to the Pentium 3 BSP, which was delivered with the evaluation version of windriver workbench 2.6 for "intel". Now I tried to boot the same VxWorks bootloader and Kernel inside a XEN HVM. I see a message from the bootloader "V1.6+++..." and the

Hi I would like to run/port samba on VxWorks. Anybody worked on this side? Basically we would like to view files/folders on VxWorks from Windows machine. I don't think just by modifying build procedure its possible to build & run samba on VxWorks. Any idea how much effort it could take to port code and other stuff. Thanks, Srinidhi -------------- next part --------------

Hi, Is it possible to run Wine over vxWorks OS \PPC architecture ?? If not - Does anyone know about Windows emulator for this atchitecture. Thanks.

Hi. I was wondering if anyone has compiled Bullet Physics for WindRiver's vxWorks (or know of anyone who may have done so). Any insight / info / help would be very much appreciated. Thanks! -Ryan (aka keppy) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20100120/53f5b439/attachment.html>

Hello Group, I'm not registered in this mailing list, however it will be great if someone can help me with these questions: I have "OpenSsl" up and running on Vxworks. How difficult will it be to port OpenSsh "server" part on to Vxworks ?. Should I take the portable version or the regular version ?. Just compiling LIBSSH_OBJ, SSH_OBJ, SSHD_OBJ, LIBCOMPAT will serve my

hello. i am interested in porting the openSSH to VxWorks. 1) is there a free port that has been done for this OS ? 2) can you assess what is the effort required to perfrom such a task ? 3) what would be the expected footprint of the code ? best regards Ran Tidhar