similar to: how to define a secure trunk

Hi, according to discussion on asterisk IRC, where people said, that macros will be depracated, I tried to migrate from macros to contexts and Gosub but if I try to use gosub in extensions.ael, ael compiler complains, that I shouln't use Gosub app, but I can't find ael keyword, that will be Gosub equivalent, or can I ignore this ael warnings? thanks PJ LOG: lev:3 file:pval.c

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Hi, I have asterisk on public IP and phones in two locations behind firewall/nat, - when I have nat=yes and canreinvite=no, this is working fine, but rtp stream must go _always_ through asterisk, even if phones talk inside their locations - when I have nat=yes and canreinvite=yes, phones can speak only inside their location and rtp stream is connected directly between phones (this is, imho,

Hello list, Im writing my dial plan, in witch every SIP phone begins with 74 and has more 3 numbers (like 74XXX). So, I want to route all 74XXX calls to my sip channel. For this I wrote this line: exten => s,1,Dial(SIP/74118@193.136.252.5,30,r) but this way all calls go to 74118@193.136.252.5 ..... Then I tried: exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r) but this way, the

-----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Mason (Lists) Sent: Monday, September 17, 2007 12:45 PM To: joao.pereira at fccn.pt; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Call Center SoftPhone with Auto Answer Joao Pereira wrote: > But still, the

Hello to all Im looking for a billing tool for Asterisk, that works with PostgreSQL. All the tools I found in www.asteriskbilling.com just work with MySQL :( Do you know a nice billing tool for Asterisk with PostgreSQL? Thanks Joao Pereira

Hello I need to buy IP Phones to work with Asterisk, and I'm in doubt between Snom and Cisco Phones. Can you gurus, please, give me your impression of these 2 brands? I need to focus more in SIP and Asterisk compatibility and less in pricing (yes, I know the Cisco are more expensive). Are there any features that Snom has, that Cisco doesnt? And are these features important? Thanks Joao

Hi all I have a pocketPC Toshiba e750 and I want to make SIP calls from it, but I didnt found any free softphones for my Toshiba. X lite's versions for pocketPC isnt free :( Did someone used before a free softphone for pocketPC? witch one? Thanks Joao Pereira www.fccn.pt

Hello Our NT workstations always ask for the password on each share of the samba server, although the password is the same as the log on password. Is there any way to avoid this ? The first try always fails on the server, but I don't what user/passwd combination NT uses on that first time... Thanks, Joao Pagaime -- FCCN - Fundacao para a Computacao Cientifica Nacional - Tel: 351-1-8440100

Hi, As many of you may know, we are undertaking several tests in order to test the interoperability between several PBX IP from different vendors. Until now, we were trusting that the VoIP IP PBX were good enough to be interconnected directly, however, one of the vendors have presented the "SBC" concept. The "SBC" (Session Border Controller) is not a new concept since we

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

Is it possible to implement a dial-out call queue in Asterisk? My idea is to give Asterisk a list of numbers, and then he makes the calls and delivers the calls to a call queue. Then, the agents will answer the calls. Is this possible? Thanks Regards Joao pereira

Hello I want to use Asterisk to implement a SIP Domain allowing my clients to do URI dialing and receive calls from the Internet through URIs and ENUM. My question is, should I put my Asterisk outside the firewall (in the DMZ) to allow connections to the Internet? Or should I have it inside my local network and put a SIP Proxy (like Openser) in the DMZ to implement the SIP domain? Thanks

Hi Users, Administrators and Pavel Jezek, You prefer chan_h323 from asterisk tree and it's of course that use channels by tree is very good. But in 1.2.x, the chan_h323 is very simple and the chan_oh323 is so bad. And I work with chan_ooh323, that it's too from Digium and work good! And I am Studing one possible change to Asterisk 1.4.x , but in 1.4.x the oh323 channel don't have more,

Hello, if somebody using this scenario in production successfully, please send me info, which ISDN card for asterisk server is usefull for me (Digium, Sangoma)? my crucial requirement is "caller id name" transfer/display between ISDN (Siemens PBX) and IP phone connected to asterisk I'm using PRI interface and Q.SIG signaling. thank you PJ

A week ago, I tried give realtime priority to asterisk proces using -p switch, asterisk was running inside astcanary, but yestarday asterisk probably starts eating all cpu and lock any access to computer, only ping was possible, so, anybody have experience, that ascanary process does really work to lower process priority in case of overloading? PJ

I'm having problem powering Cisco phone's (7940 and 7905) on Linksys SRW224P switch (with PoE functionality). I have tested three phone's, one is working (7905) and two aren't (7905 and 7940). I have plugged all three phones on same switch port with same cable! Do I need to change anything in phone configuration? Is there something wrong with Linksys switch? How can I troubleshoot

Hi Friends, i have installed and configure asterisk-1.8.0. When i have tried asterisk start get below errors and not able to start asterisk. *FD 32767 exceeds the maximum size of ast_fdset!* Thanks in advance. -- Best Regards, Rajnikant Vanza -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have configured call pickup, and this works fine. Although there are 2 problems, perhaps anyone would know a solution to this; - When I pickup a call from another set, the *8 code keeps being displayed in my screen (Snom 220). I would like it to show the phonenumber of the person calling me. - When a caller that I've answered through Call-Pickup disconnects, my phone does not close

Hello, Realized update dovecot on my server. Now the search is returning differently from the previous version bringing reference information of other messages . For example when doing a search for anderson.joao this new version of the dovecot dovecot 2.2.21 + fts - Solr response will be all email that has the word anderson and joao, instead of returning only items with the word anderson.joao.