Displaying 20 results from an estimated 2000 matches similar to: "TDM2400"
2005 Oct 08
2
Configuring TDM400 in Australia
Hi, all
I have installed TDM400 with 1 FXS and 1 FXP ports.
Now I am goig through documentation on how to configure it.
It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do
I use?
Can someone send me sample zaptel.conf file for Australia? This will save me
some time and will be used as a working example.
Thanks,
Rudolf
2006 Dec 10
4
X100P clone dial problems.
I'm not sure if I have a configuration problem or not. I am unable to
dial out. When I try to dial in I can hear the phone ring on the
dialling phone but Asterisk does not register anything.
In zaptel.conf I have
loadzone = au
defaultzone=au
fxsks=1
In zapata.conf
language=au
context=from-pstn
When I do: zap show channels I get:
Chan Extension Context Language
2007 Mar 07
1
Asterisk Registering to other SIP servers.
Hello,
I am trying to REGISTER asterisk to a SIP server, which is listening on Port
6060 (not 5060).
The sip.conf file contains
register=18474201111:quintum@192.168.2.94:6060/18474201111
maxexpirey=3600
defaultexpirey=120
But the REGISTER message is sent to Port 6060, but the Request-URI still
contains, 5060. This is being rejected by SIP server.
REGISTER sip:192.168.2.94
2005 Jan 09
2
TE110P error
Good day all
We got a Wildcard TE110P
I installed linux,zaptel,libpti and asterisk
I coped over my zaptel.conf and zapata.conf from a previous E100P config
But when I try to start asterisk it gives error not bying able to load
zap channles:
== Parsing '/etc/asterisk/zapata.conf': Found
Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap:
Ignoring switchtype
Jan 10 08:17:18
2006 Dec 18
2
ZAP problem
when placing calls to the system through SIP, I got these messages,
Dec 19 00:26:55 WARNING[5570]: channel.c:2571 ast_request: No translator
path exists for channel type Zap (native 68) to 256
Dec 19 00:26:55 NOTICE[5570]: app_dial.c:1056 dial_exec_full: Unable to
create channel of type 'Zap' (cause 0 - Unknown)
any explanation for this?
Thanks,
-------------- next part --------------
An
2008 Apr 14
4
Unable to load module chan_zap.so
I am having trouble with chan_zap.so not loading. When I load it from
modules.conf, Asterisk bails out without any error message. When I
load it from the console, it just says "Unable to load module
chan_zap.so" no matter what verbose level I am using.
dmesg says:
Zaptel Version: 1.4.4
Zaptel Echo Canceller: MG2
Freshmaker version: 73
Freshmaker passed register test
Module 0:
2010 Dec 22
1
dahdi-channels.conf for Digium TDM2400
Hello everyone,
I have noticed thar our dahdi-channels.conf has some repeating directives,
for instance for channel 2 (FXO) we have these settings:
;;; line="2 WCTDM/0/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
As you can see, a few directives are repeated (callerid, group, context).
This was generated by
2004 Apr 11
2
Booting error - Unable to specify channel 2: No such device
Hello All,
I am getting a set of errors when I boot Asterisk that I have not been able to
solve. What is causing these error(s)?
Asterisk boot output:
==============
Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support
Services, Inc.
Written by Mark Spencer <markster@linux-support.net>
=========================================================================
[
2009 Sep 27
2
DAHDI congestion problem
I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have
messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2.
When I dial, I see:
-- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in
new stack
== Everyone is busy/congested at this time (1:0/1/0)
It looks like the
2006 Nov 23
2
Asterisk and TDM400P ?
Hi
i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
my asterisk to a french analog line.
In my zaptel.conf, i have:
loadzone=fr
defaultzone=fr
fxols=3
when i load the module, i have in logs:
Nov 24 06:13:40 gw kernel: Freed a Wildcard
Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded
Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded
Nov 24
2007 Sep 15
2
Astribank and caller ID from PSTN
Hello,
I've one astribank with 8 FXO unit and 8 pstn lines connected to the
astribank. When I receive calls on my ipphone I get always Unknown
callerid.
It's is possible to receive the callerid from the lines on the astribank
unit? This is my config:
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
;rxwink=300
usecallerid=yes
callerid=asreceived
;cidsignalling=bell
2004 Nov 23
7
Unable to open master device '/dev/zap/ctl'
I installed TDM400P and X100P pci cards in a system running mandrake 10.1
official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk
and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running
ztcfg and asterisk fails.
[root@asterisk asterisk]# ztcfg
Notice: Configuration file is /etc/zaptel.conf
line 3: Unable to open master device '/dev/zap/ctl'
2007 Apr 30
1
TDM400P and Junghanns QuadBRI issue
Hi List,
I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI
on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6).
I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4
and asterisk-1.2.17
When it's the time for ztcfg to do its job it complains with
<ZT_SPANCONFIG failed on span 2: No such device or address (6)>
2006 May 02
3
Need help configuring TE100P and 3 X100P clone with MD3200 chipset
I can either get the TE100P working or the 3 X100P clones working, but
never both. I have the TE100P connected to a channel bank, and X100P
clones to lines from the phone company.
This is my zaptel.conf
span=1,1,0,d4,ami
fxsks=1-24
loadzone=us
fxols=25-27
loadzone=us
I then do
[root@asterix root]# modprobe zaptel
[root@asterix root]# modprobe wcte11xp
ZT_CHANCONFIG failed on channel
2003 Dec 04
2
Carrier Access Channel Bank Setup -- No hangup
I just purchased a T100p from digium and a Carrier Access Access Bank 1 channel
bank (12fxs/12fxo). I have the setup partially working thanks to some help from
IRC. However I still have the following issues I can't seem to resolve
1. When calling into the system from the PSTN call hangup is not detected. *
leaves line in use until it is shutdown.
2. When calling an analog phone connected to
2007 Oct 26
1
ABE, Sangoma, T-1 no recognizing calls
Hello All,
I have a setup of ABE on rPath linux,Sangoma A101D, and a T-1 line (Not PRI)
which is all happily coexisting and all lights are green.
The T-1 comes in from the world into a "Shark Box" which splits the T into
384K data and 6 channels voice. The data side is working great. The voice
side, not so great. It was originally broken out to 6 pots line and Verizon
came back
2004 May 19
4
TDM400P problems with 1 FXS, 1 FXO
Hi-
I'm totally stumped configuring my TDM400P with one FXS and one FXO
module. Before I got the FXO module, I used to have an X101P, and
everything was working very well. Now * doesn't seem to recognize the
FXO channel. I've searched the wiki and the list archives. Stock Debian
3.0 stable installation. Any advice? Thanks.
-- David
Here's my configuration:
modprobe zaptel
2004 Dec 10
2
Asterisk 1.0.3 - Signaling on E100P.
Hello list ,
I?m putting to work a new asterisk box.
I?m running * 1.0.3 with (one )
Wildcard TDM ( 2FXS* 2FXO) and
(one) E-100P.
Both boards are working well. ztcfg
don?t show me any error.
zttool list both cards as "OK"
But when i run asterisk on verbose mode
i get those errors :
[chan_zap.so] => (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
--
2007 Aug 28
1
HDL F10 brazilian doorbell device + TDM2400
Hi,
I'm trying to connect an HDL F10 device for a friend living in Brazil to
the TDM2400 on his Asterisk server.
That device should behave like a normal doorbell and it is if connected
to an analog PBX.
I connected to the TDM2400 and everything works fine except for one
thing: when the called party hangs up his phone, the F10 HDL device does
not hang up.
I'm not brazilian and not
2007 Apr 19
1
Problem with TDM2400 and Polycom 501... Voice Quality Lost...
Hi List...
I have an asterisk box with one TDM2400, it has 8 FXS's and 12 FXO's,
and it also has the echo canceller...
I'm running Asterisk 1.2.13 and Zaptel 1.2.12 with the Kernel
2.6.9-34.0.2.EL
I'm using Polycom's 501 with the SIP 1.6.2.0041
The problem is when someone dials to or from the PSTN through the
TDM2400, the voice quality is crappy...Instead of hearing: