similar to: aastra 480i xml interface for "comedian" mail

I want to use extension numbers that begin with the # key in my dialplan, but I can't get my Aastra phone (6731i) to transmit the # key to asterisk. It works fine for the * key. I've tried numerous Local Dial Plan patterns in the aastra web configuration but none of them worked. My current Local dial Plan pattern is "x+#|xx+*|#x+". Any help would be appreciated. -- Marvin

I'm having problems getting my aastra 480i to register with the asterisk server. I can inititate calls from the phone, but >sip show peers does not show any IP address registered for this phone. I am probably missing something stupidly simple. Anyone have an example config to share or corrections for my configuration? Asterisk 1.2 aastra 480i CT has the 1.4 firmware <sip.conf>

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

The problem with the extra ptime descriptions in the SDP has been fixed in Asterisk (see http://lists.digium.com/pipermail/svn-commits/2006-October/017694.html). I've got the latest version of the 1.4 branch from SVN and have verified that the codec negotiation is working again. If you don't want to try the latest SVN version, then you'll have to restrict the phones to a single codec

There isn't much documentation on adsi, but I called NETXUSA (the vendor of my 480e) and they helped me along. My experience: 1. I really had no experience with ADSI so I had (probably still have) some misconceptions on how the configuration is loaded onto the phone. 2. I set the following in my /etc/asterisk/asterisk.adsi (most of this is the stock asterisk.adsi script): ;

But where do can you get this later firmware from? I'm still on 1.0.0.78 on my 480i. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Passchier Sent: 05 August 2005 00:04 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] AASTRA 480i Firmware 1.2.0.162 SIP ALERT_INFOproblems

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

I realized today after much playing around that the Aastra 480i phone (I'm assuming the others as well), will freeze and can be reproduced if all of the following is true: 1. You enable auto answer in the configurations 2. You call from an Aastra phone to another Aastra phone using the alertinfo that auto answers the phone. 3. You hangup and then try using a softbutton programmed as a

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

I'm currently testing these phones and so far I'm very pleased with them. I'm using the SIP image (Version: 1.0.0.23 Release: 0032-01-A4). There are a few issues with the speaker not working properly when you dial out or pick a call but this is a known issue and will be hashed out in the next release. I've been working with the developers at Sayson and they have been very

Just found out my maintanence agreement with fonality does not cover phones over a year old. So, of course, they don't repaird phones, only replace them. Very worldly of them... Anyone know where I can get an Aastra 480i repaired? The phone works on speakerphone, but when you lift the receiver offthe hook, the phone does not engage. There is something wrong with the "hook". The

After upgrading to 1.8.3.2 today, I notice that my Aastra 480i SIP phones no longer initiate hold music when a call is placed on hold. I seem to be having the same issue as the person here: http://forums.digium.com/viewtopic.php?f=1&t=77553 Has anyone else run into this issue? -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

Hey guys, We bought a Aastra 480i phone for our boss. This looks like a nice phone, but we have an issue with it. The issue is this: the phone is able to place calls. But as soon as the phone receives a call, you are able to answer it. But then, 2-3 seconds later, the call is dropped. The extension works, because I've put his Gnet phone back until I figure out what is wrong with this

Are the cordless phones on the 480i CT from Aastra registered independently in Asterisk? Such that if I have 5 of the cordless phones hooked up, each one is it's own "extension?" ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended

Hi Folks, Looking for feedback on the cordless phones with the Aastra 480i CT handset. Is voice quality comparable to standard consumer residential 2.4GHz cordless phones in the US$30 - $50 price range, or better/worse? How about handset and speakerphone quality for the main phone? Seems like there have been various big issues with firmware in past, but is it pretty stable now? Thanks,

I just bought an Aastra 480i CT for a client who needed cordless capabilities in their office. I'm trying to set up the base station and cordless handset in my office first. I'm able to connect the phone to my Asterisk box and make outgoing calls from either the base station or the handset - to extensions within my office as well as numbers outside the network. But I can't

I have been playing with a 480i with the new firmware 1.2.0.162 I hope to get some form of paging intercom function to work. In the wiki someone post that ALERT_INFO type of paging might be in this version of firmware but I have been unable to find anything on this yet. I have tried sending the ALERT_INFO to the phone a number of ways with no results. I then hooked up my bt100 and tried to dial

I have this Aastra 480i phone, and you can set the TFTP server IP address manually in the phone, but there should be a way to have it find the TFTP server information via DHCP. Does anyone know if this is possible, and if so, what is the attribute I have to set on my DHCP server? Thanks! __ Dana Olson Disclaimer: The information transmitted in this message is intended only for the person or

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the