similar to: Cisco 7970 SIP upgrade issues

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been forced to introduce a Cisco 7971G-GE into my network, because "it has a pretty screen." I have wasted nearly three days fighting with the thing based upon the information on voip-info.org and a few other forums. Asterisk is reporting a 401 Unauthorized. Which typically means bad username/password combination. Unfortunately, all of the usernames and passwords I see in

Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk 1.2.26. I have uploaded in my tftp server the firmware 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in SEPmacaddress.cnf.xml I have: <loadInformation>SIP11.8-0-4SR1S</loadInformation> ..but in tftp log server I have: Oct 07 11:56:22 asterisk1.local

Anyone have the 7970 xml config for sip yet? Aaron

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

I try to start Rmcdr from JGR. The Rmcdr-Windows comes up correctly; but the Menu-Bar in the Rcmdr-Window goes away, if I try to go into the Rmcdr-Window. I hope, someone has a solution. Regards, willi -- 0(049)753124283 privat 0(049)7531882641 büro [[alternative HTML version deleted]]

Hi, ? The current SCCP image on the 7942 phone is :SCCP42.9-0-2SR1S. We are trying to convert/upgrade the phone to SIP version of the firmware i.e : cmterm-7942_7962-sip.9-0-3 (Firmware is downloaded from the cisco support site). We have unzipped and placed all the files in the /tftp (root directory) of tftp server. Following files are also placed in the tftp directory. ? The Upgradation /

Can anyone point me to the location of the 7970 SIP image? I'm logged in thru my CCO acount with my smartnet contract and cannot find it anywhere..... I know that a bunch of people have it at this point...how'd they get it? -Darren

Hello, I need to finish a small GUI program till friday and I am somewhat stuck. First of all, wxRuby seems to ignore the size request of the frame as defined via XRC (or I''m completly doing the wrong thing!) Second, it complains about the statusbar and doesn''t display it. What am I doing wrong? The files are attached Thank you Ulrich Spoerlein -- PGP Key ID: F0DB9F44

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

Hello, I am trying to keep my samba accounts in sync with my unix accounts. I want to login ssh. Syncing passwords works. Scenario: I create a new user: useradd -m testuser passwd testuser When I log in with the user pam_smbpass should create a corresponding samba user. I modified system-auth which is included in sshd: #### /etc/pam.d/system-auth auth requisite pam_unix.so

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

- How to restart the phone? (On 7960 it is *+6+Settings) - How to setup working dtmf? - How to setup hinting? For line is <line button="4"> <featureID>9</featureID> ... For speeddial is <line button="5"> <featureID>2</featureID> <featureLabel>341</featureLabel> <speedDialNumber>341</speedDialNumber> </line>

Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? Thanks

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>