similar to: OT: Reflash Mitel 5220 from MiNet to SIP

I know this is not strictly an asterisk issue but it is related I guess. Just to let you know that after many calls to Mitel the consensus is that they will be releasing a new version of the 5220 that is dual boot (minet and SIP) next week or the week after. This firmware will only appear on NEW phones manufactured after the release date (no one could confirm but the 23rd of sept was

Does anyone know if this phone can or does work with Asterisk ? I have a potential client who wants to throw away their current mitel ip system (keeps crashing on a regular basis - not good for a phone-based company), but are reluctant to purchase new handsets. Thanks. Julian.

Has anyone here had any experience with Mitel 5220 IP phones with Asterisk? Basic features are working good, but I'm looking for more advanced features like sending text to the display or having the lights on when an extension is in use via the hint subscription. Thanks.

Hi Folks, Just in case there are any Mitel gurus here: 1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to the SIP firmware? I have inherited one that's Minet only. 2) I have a 5310 conference unit and 5235 phone in SIP mode, but someone's lost the connecting lead. Can anyone recommend anywhere in the UK for a replacement lead or confirm the pin-out so I can

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Hi, I am trying to contstruct a mutual informtation matrix using the function build.mim() from the minet package: > build.mim(myData, estimator="empirical") and I have two questions. 1.) The estimator "empirical" computes the entropy of the empirical probability distribution. This probably means it is using this definition of the entropy: H = sum_x sum_y p(x,y)* log(

Anyone had any luck configuring the hold button successfully on a Mitel 5220 SIP phone? Xfer works great. Call completion works fine both directions. Audio has been beautiful. With a working system hold button, this would be a really usable phone. The hold button does make the call appear to be on hold: the light is blinking, the other party is still silently connected, I can pick up a call on

Rene, We are using the 5220 with Asterisk with no problems. The current firmware for the phone is 3.1.0.10, which you can download from http://sipdnld.mitel.com/ If you post your sip.conf file we can see if there's any errors. Cheers Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Long time subscriber/reader of this list - thank you for all the great ideas. Scenario: We currently provide a hosted ACD system using Mitel phones (speaking the Minet protocol) to an NCI based server solution. The logic behind this choice was the emulation of key system features etc... Many of our clients have asked for basic call queue functionality: - Agents having the ability to

> On Nov 11, 2020, at 5:38 PM, Warren Young <warren at etr-usa.com> wrote: > > On Nov 11, 2020, at 2:01 PM, hw <hw at gc-24.de> wrote: >> >> I have yet to see software RAID that doesn't kill the performance. > > When was the last time you tried it? > > Why would you expect that a modern 8-core Intel CPU would impede I/O in any measureable way as

Hi guys, I'm trying to reuse Mitel 5215 from proprietary system now into Asterisk :) ! I've them already with SIP and handling calls sucessfully! I've followed instructions from: http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+Mitel+5220 Additional Servers * Outbound Server: Off * Outbound Server URL: blank * Outbound Server Port: blank * Voice Mail

---------- Forwarded message ---------- From: Christopher Aloi <chris.aloi@gmail.com> Date: Jun 18, 2006 9:52 PM Subject: Re: FW: [Asterisk-Users] Creating Queues on Asterisk server - Sendingingress calls off-net to either PSTN or another VoIPapplication - thoughts? To: Alexander Lopez <Alex.Lopez@opsys.com> Alexander, Thanks for your reply, may I ask a few questions? - Does the

On Wed, Nov 11, 2020 at 5:47 PM Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > I?m sure you can reflash LSI card to make it SATA or SAS HBA, or MegaRAD > hardware RAID adapter. Is far as I recollect it is the same electronics > board. I reflashed a couple of HBAs to make them MegaRAID boards. > you can reflash SOME megaraid cards to put them in IT 'hba' mode,

Disclaimer: Not a troll I'm curious as to this obsession with uptime is. All of the posts of this type are along the lines of "After X days, Y thing does not work but if I reload or reboot, it's OK" - so why not cron a reboot? Is it considered bad form or something like that? I reboot every night whether it is needed or not, not afraid to admit it, and everything works fine for

Full_Name: Claus Pastor Version: 2.9.2 OS: Windows XP Submission from: (NULL) (82.113.106.4) I use the following function to compute MutualInformation Matrix of factorial members of a dataframe. I use package minet for this: my.MI = function(test) { ## die Diagonale gibt die Entropien, Teile durch entropy von y und du erh?lst den Zusammenhang ## kenne X und sage daraus y voraus require(minet)

We are attempting to configure SIP trunking between asterisk 1.2.22 and a Mitel 3300 CX box. The Mitel machine will gateway to the PSTN for us. I found this earlier post about doing this from July: http://lists.digium.com/pipermail/asterisk-users/2007-July/191630.html Unfortunately the promised configs never came ;(. We're having the exact reverse problem: we can register with the Mitel

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

So, I recently acquired an old DVG-1120M that was previously used with AT&T CallVantage service. It currently uses MGCP. I see online that there is a SIP version out there (DVG-1120S), which is essentially a DVG-1120M reflashed with the SIP firmware and the 'M' scraped off in favor of an 'S'. I've also seen people on this list saying that they flashed their M with S

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either