similar to: CAPI (Eicon Diva V-4BRI), Hylafax & IAXModem

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports

Hi, I have to set up an Asterisk with an 4-port BRI card. Hylafax should send and receive fax. Will this work reliable? Any recommandations for an 4-port BRI card? Other alternatives except analog fax units? thanks for your help best regards Thomas

Hi I've got a dell 2550 with an Eicon Diva server PRI card plugged into it. I can call out using the acopy2 test utility. I'm having trouble with asterisk making calls however... my capi.conf and modules.conf looks correct by the wiki instructions - does anyone have any advice on where to look ? I can attach conf files etc. if needed. Asterisk says it has 30 capi channels available,

Are there any step by step instrunctions on how to install drivers and I guess bristuff for this card? Just need to use it to handle voice on 2 BRI circuits (UK) then utilise with Asterisk and some Digium cards handling POTS phones (and some VoIP out the back). It's the EICON card stuff and how to make it all work I'm finding confusing? Steve -- NetTek Ltd UK mob +44-(0)7775 755503

Hey gang, I'm hoping someone can help me out here. I've just noticed that on two of my five Asterisk boxes (CentOS 4.4, Asterisk 1.2.12.1), I'm getting the following translation cost for g729: asterisk*CLI> show translation Server 1: g729 - 26 25 25 25 25 24 26 - 53 36 Server 2: g729 - 66 65 65 65 65 64 69 -

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Is there any way to customize VoiceMail ? I would like to customize the message played to callers sent to the voicemail becouse the extension is busy or otherwise unavailable. Is it a way to record a welcome message and use it ? thanks in advance, Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

I just installed Hylafax with Iaxmodem and I am not getting good results when receiving faxes. I can see that the modem is reporting the following: Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 2400 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 4800 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 7200 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]:

Hi, I'm trying to edit an AMP-derived dialplan: the macro "dial" uses the AGI script "dialparties.agi" to find the extension to call. I'd like to drop this script: does anyone can explain me what is its main job? Thanks -- Domenico Viggiani

Hi! I'm always getting this error when echo cancellation should start. == ISDN3: Setting up echo canceller (PLCI=0x203, function=1, options=4, tail=64) == ISDN3: Setting up DTMF detector (PLCI=0x203, flag=1) -- ISDN3: Error setting up echo canceller (PLCI=0x203) Apr 3 10:49:30 WARNING[17266]: chan_capi.c:3334 show_capi_conf_error: ISDN3: conf_error 0x300b PLCI=0x203

Good Morning, I've been trying to set up asterisk@home and thing are going pretty well. I do have a question: When I *98 into voice mail I hear a message that says "Asterisk mail" then short pause then the word "mailbox" then a very long pause, then a request for a password. I believe some other audio should occur in the long pause between "mailbox" and

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

Hey, If anyone supplies or knows where I can get either an Eicon Diva V-4BRI or a Junghanns QuadBRI card in Australia, please could you contact me offlist? Also, if anyone has any second-hand ones they need to get rid of, I'd be interested in making an offer! I've been checking eBay, but there don't seem to be any of these available at the moment. Thanks, Avi -- National Manager -

I thought I could try to post this question here since I have at times found excellent support here on A@H issues as well as pure/straight digium/asterisk issues. I am looking to finally build a permanent asterisk server and would prefer, if at all possible, to stick with the "new" A@H called trixbox. Does anyone know if the CentOS behind trixbox is a relatively complete CentOS system? I

hi list , is having problems when sending a fax with hylafax and a card sangoma A200D, when he sends it arrives to the destination but it paginates appears in white this is my log Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms, 20 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Aug 20

Hi All, Having a rather annoying problem with the Polycom 301 phones, suspect it to be my dialplan. Basically if you lift the receiver off the handset and dial a number, it will not let you dial a number longer than 10 digits (Can see this being acceptable in US, but in UK its a right pain). As soon as the 10th digit is entered, it starts to dial and the number is invalid. If the phone is left

Can not check voice mail-box externally. I'm trying to log-in externally (from PSTN line) to check my "voice-mail" so I created context to authenticate log-in ... exten => 7,4,Authenticate(01894546) exten => 7,5,DISA(4789|disa-access) Authentication works OK, I get inside dial none enter my mailbox extension but it doesn't accept my mailbox password even though it is the